Skip to main content
GullySystem
Automotive

Collections and Payment Follow-Up for Battery dealers

Turn unpaid customer balances into assigned follow-up actions.

Sales and Distribution

Does this function belong in your operation?

Use when customer credit creates balances that require organised follow-up.

An invoice becomes due or a payment promise needs checking.

Garage accounts are listed by amount due and age, with the next promised date. Payments by cash or transfer are marked at the counter. Chasing happens from one list.

Bring the records the workflow depends on.

  • Outstanding invoices
  • Customer contacts
  • Follow-up ownership and rules

Outputs to check

  • Assigned collection action list
  • Payment-promise and dispute history
  • Overdue balance follow-up report

Follow the collections and payment follow-up workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Prepare balances

    Use current invoices, credits and allocated receipts.

  2. 2. Prioritise action

    Assign due accounts and separate disputed amounts.

  3. 3. Contact the customer

    Record the discussion, promise and next date.

  4. 4. Check the outcome

    Confirm whether payment arrived or another decision is needed.

  5. 5. Close or escalate

    Remove settled items and route unresolved exposure to the authorised owner.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Accounts assistant

Works the list from the top and keeps the notes current.

Field collector

Carries the day’s route on a phone and records what was actually brought back.

Sales executive

Knows what the customer owes before asking for the next order.

Owner

Reads promises broken twice, and decides who stops getting goods.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Customer disputes invoice

Separate the dispute owner and action from routine payment reminders.

Promise date missed

Record the failed promise and route the next action under the agreed policy.

Payment received during follow-up

Reconcile it before sending another demand for the same amount.

Can this work independently?

Collections can use a reviewed outstanding-balance import. Invoice and receipt connections keep the amount current, while credit control decides whether further orders are held. Follow-up records do not post payments; settlement must come from the authorised receipt or accounting process.

Systems and records it connects with

  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Receipts management: Recorded customer payments and invoice allocations.
  • Credit control: Customer limits, current exposure and authorised order releases.
  • WhatsApp and SMS: Permitted message content and channel delivery responses.

Configure, test and introduce the workflow.

  • We go through your receivables and the way calls are made now. You send a recent outstanding statement. A note comes back on how accounts are grouped.
  • Timing before and after the due date, tone of messages and escalation limits are agreed. You approve the wording for each stage. Open bills are imported from your accounting software. The accounts team checks a sample against the ledger. Mismatches are corrected.
  • Collectors and the accounts assistant use the list beside their old method. Notes go in. Gaps in the list are fixed. Collectors are trained on the phone screens. The diary is set aside. From then on the daily list is the working tool.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Follow-ups use current balances.
  • Payment promises retain dates.
  • Settled invoices leave the active collection list.
Battery dealers

How the business operates.

A serial number and a date code are stamped on the lid of each battery that leaves the counter. Months later it returns with a dead cell, and the claim stands or falls on a record the dealer must find in seconds.

Battery stock by brand, model and serial

Hold stock by brand, model, ampere-hour rating and chemistry, with serial and date code keyed in on receipt. The counter then hands out the oldest unit first.

Sale and warranty record

Tie every sale to a serial and a customer, with the free-replacement window and the pro-rata period read from the brand’s terms. A claim opens from the invoice, never from a lost card.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Battery stock by brand and serial. Hold stock by brand, model, ampere-hour rating and chemistry, with serial and date code on every unit, and scans at receipt and sale keep the shelf count honest. No stock-taking guesswork.
  • Date codes and stock ageing. List units by manufacture date and flag the ones nearing the age at which charge is lost, so the counter picks the oldest unit first. Shelf life is protected.
  • Counter billing with exchange rebate. Quote two rates for each model, with or without an old core. The rebate prints on the bill, and the serial is added to the invoice line so the warranty record starts at the counter.
  • Sale and warranty record. Tie every serial to a buyer and a date, and read the free-replacement and pro-rata periods from the brand’s terms, so a claim opens straight from the invoice. Proof is already filed.

Operational bottlenecks to check

Serials sit only on the warranty card

The customer loses the card. The dealer cannot show which 150Ah tubular inverter battery went out, or on what date, and the brand rejects the claim.

Old batteries are not counted

Exchange rebates are given at the counter, yet the count of scrap cores received, load-tested, held and sold to the smelter’s buyer is nobody’s figure.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Receive stock

    Stock arrives against the supplier’s delivery note. Serial and date code are keyed or scanned, and each unit goes on the shelf as a record the counter can find by rating and make.

  2. 2. Quote and bill

    The counter quotes a rate with and without an old core, raises the bill and ties the serial to the buyer’s name and phone. The warranty period starts from that day.

  3. 3. Take back the old core

    The returned battery is logged with brand, rating, terminal condition and weight. The rebate shows on the bill, and the core goes into the exchange register to wait for its load test.

  4. 4. Handle a warranty case

    The bench records open-circuit voltage and the drop test result, tags the unit and sends it to the service centre, and the customer is told where the battery stands. No guessing.

  5. 5. Collect trade dues

    Garage and electrician accounts show the balance by age. A reminder fires ahead of the credit ceiling, receipts are posted against bills, and old dues stay visible on the list for the collector.

  6. 6. Claim brand schemes

    Purchases and sales are set against each brand’s slab, and the claim form is prepared from the record when the period closes. Targets are checked as the month runs.

Industry reports to connect with

  • Stock by brand, model, serial and manufacture date
  • Batteries sold by serial, buyer and warranty end date
  • Cores received, tested, held and sold, with rebate allowed
  • Warranty cases by stage, brand and age

Questions before implementation.

When should battery dealers consider collections and payment follow-up?

Use when customer credit creates balances that require organised follow-up. An invoice becomes due or a payment promise needs checking.

What should we bring to the requirements discussion?

Bring anonymised examples of Outstanding invoices; Customer contacts; Follow-up ownership and rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Turn unpaid customer balances into assigned follow-up actions. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Communication permissions and collection conduct remain your responsibility. The customer’s actual payment is recorded separately from follow-up activity.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Follow-ups use current balances. Use this check when reviewing the first working version.

Talk to us

Discuss collections and payment follow-up for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements