Skip to main content
GullySystem
Real estate and construction

Business solutions for Industrial park developers

Explore software for work such as “Plots by size and use”. Review each business function below, including when it fits and what to check before implementation.

Industrial park developers

How the business operates.

Enquiries, lease terms, rent, shared charges and meter readings for plot allotments and shed lettings in an industrial park all run in one system that GullySystem configures. Every plot and shed carries its area, its lease and its dues. Service requests, fit-out approvals and renewals sit on the same unit record.

Park layout, plots and sheds

List each plot, shed and racked bay with its phase, plinth area, clear height, floor loading and asking rate. Leasing sees at once what is vacant, held, let or near expiry.

Enquiries and site visits

Record each broker or lessee enquiry with the space asked for, the visit made and the follow-up due. Nothing depends on a card in someone’s pocket, and a lost enquiry keeps its reason.

Quotations and offer letters

Build an offer from the unit’s area and rate, with lock-in, escalation and deposit written in. Every revision stays beside the first, and an accepted offer starts the lease for that allottee.

Lease register

Hold start date, lock-in, escalation step, rent-free period, deposit, sublease clause and renewal option for each lessee. A monthly list shows the dates falling due, in the clauses your own leases use.

Rent and shared-charge invoicing

Raise the month’s invoice from lease terms and share common-area maintenance over built-up or plot area. Tax lines follow the rules of your country, as your accountant confirms them.

Sub-meter readings and utility charges

Capture feeder and unit readings on a phone, with the previous figure shown beside the new one. Demand, kVAh units and water draw are then charged to the right lessee.

Lessee ledger and deposits

Show each lessee’s deposit, advance rent, invoices, receipts and balance on one statement. Receipts are posted as cheques, transfers and cash arrive, and reminders go before each due date.

Service requests and rounds

Log a complaint by lessee and location, assign it to a person and close it with the work done. Schedule rounds on the transformer yard, pump rooms, hydrant lines and streetlight circuits.

Fit-out and extension permissions

Record a lessee’s request to add a mezzanine, racking or a partition, with drawings and the park’s reply. An approved change updates the unit’s area for later charges and the invoice follows it.

Owner and investor view

Show occupancy, rent roll, dues and expiries phase by phase, in a screen the owner or a fund investor can read directly. Totals open down to the unit when asked.

The records that hold the operation together.

  • Park layout, plots and sheds. List each plot, shed and racked bay with its phase, plinth area, clear height, floor loading and asking rate. Leasing sees at once what is vacant, held, let or near expiry.
  • Enquiries and site visits. Record each broker or lessee enquiry with the space asked for, the visit made and the follow-up due. Nothing depends on a card in someone’s pocket, and a lost enquiry keeps its reason.
  • Quotations and offer letters. Build an offer from the unit’s area and rate, with lock-in, escalation and deposit written in. Every revision stays beside the first, and an accepted offer starts the lease for that allottee.
  • Lease register. Hold start date, lock-in, escalation step, rent-free period, deposit, sublease clause and renewal option for each lessee. A monthly list shows the dates falling due, in the clauses your own leases use.
  • Rent and shared-charge invoicing. Raise the month’s invoice from lease terms and share common-area maintenance over built-up or plot area. Tax lines follow the rules of your country, as your accountant confirms them.
  • Sub-meter readings and utility charges. Capture feeder and unit readings on a phone, with the previous figure shown beside the new one. Demand, kVAh units and water draw are then charged to the right lessee.
  • Lessee ledger and deposits. Show each lessee’s deposit, advance rent, invoices, receipts and balance on one statement. Receipts are posted as cheques, transfers and cash arrive, and reminders go before each due date.
  • Service requests and rounds. Log a complaint by lessee and location, assign it to a person and close it with the work done. Schedule rounds on the transformer yard, pump rooms, hydrant lines and streetlight circuits.

Operational bottlenecks to check

Vacant space is known by walking the roads

Which sheds stand empty, which are held for a quotation and which sit under notice lives in the manager’s head. Two brokers are then promised the same bay, and one of them goes elsewhere.

Lease clauses sit in scanned files

Lock-in, rent-free fit-out and escalation step are typed into a sheet by whoever read the leasehold agreement last. A date buried in a scan reaches the leasing head late, after the notice window closed.

Shared charges follow a stale area

Maintenance is split by plinth or plot area. After a mezzanine or an extension, the area on the invoice no longer matches the building, and a credit note follows. Lessees lose patience.

Feeder readings are argued every month

Sub-meters behind each transformer are read by hand, and the kVAh totals, demand and power factor are worked out in a separate file. Lessees query the total every month and the argument repeats.

Deposits and rent live in different books

A refundable deposit, an advance rent and a security cheque are each noted in a different place. At exit nobody can state what is owed either way, and the sublease question comes up too.

Road and utility complaints have no owner

A choked stormwater drain, a gate pass for a trailer or a tripped feeder is reported by message, and nobody closes it. Lessees then phone the owner directly, who has no record of the request.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry

    A broker, a site visit or a call from a cold-chain, auto-component or fulfilment firm is logged with the area, dock count and floor loading it needs. The enquiry also records who answered the call.

  2. 2. Offer and site visit

    The leasing team shows a layout, then sends a quotation with area, rate, lock-in and deposit. The unit is marked held, and each revised offer is kept next to the first one.

  3. 3. Lease and handover

    The agreed terms become a lease record with its escalation steps, deposit and rent-free period. Possession is noted against the unit once keys and meter readings are handed over to the new allottee.

  4. 4. Monthly billing

    The park office enters sub-meter readings on a phone. Rent, shared charges, power and water are drawn up from the lease and the readings, then sent to the lessee with the kVAh figure shown.

  5. 5. Running the park

    Complaints, fit-out requests and rounds on pump rooms, generator sets and boom barriers are logged against a location. A named person follows each one to closure, and the streetlight faults too.

  6. 6. Renewal or exit

    Expiries are listed ahead of time. A renewal repeats the offer step. An exit closes the unit, settles the deposit against dues and puts the shed back on the vacant list for the next enquiry.

Roles and responsibility boundaries.

For owners and investors

See occupancy, rent roll, dues and expiries by phase before a review meeting. Nobody asks the park office to prepare a sheet, and the figures match what finance posted.

For leasing

Log enquiries, hold a unit, send quotations and track each offer to a signed lease. Check which bays fall vacant over the coming quarter, before the next broker calls.

For park managers

Assign service requests, read the rounds log and approve fit-out changes. See which gate passes and complaints are still open, and who holds each one.

For utilities clerks

Enter feeder and sub-meter readings on a phone and see which units have no reading yet before the invoice run. A missing figure is chased that morning, not at month end.

For finance

Raise rent and shared-charge invoices, post receipts and hold deposits. Chase the oldest dues first, with the lease and the last reading open beside each overdue line.

Reports your managers need.

  • Occupancy by phase, with vacant, held, let and under-notice units
  • Rent roll by lessee, unit and escalation step
  • Lease expiries and renewal options falling due, month by month
  • Shared charges billed per square metre, with area used for each unit
  • Sub-meter units and demand per lessee against the feeder total
  • Deposits held, adjusted and refundable by lessee
  • Open service requests by location, owner and age

Connections to scope

  • Email
  • SMS
  • WhatsApp or other messaging
  • Accounting export
  • Smart meter feed, scoped separately
  • Payment gateway

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Your unit types and phases

Plots, sheds, racked bays and built-to-suit buildings are listed with the fields you quote on, grouped the way the park is laid out. Dock levellers and clear heights are recorded per unit.

Lease clauses and escalation

Lock-in, rent-free fit-out, escalation steps and renewal options follow the clauses in your own lease form, after your counsel has fixed them. Leasehold and sublease terms are entered as written.

Charge rules

How maintenance is shared, how power and water are charged and which tax lines apply are set with your finance team. Rules are tested on last month’s readings first.

Lessees and balances migrated

Existing lessees, running leases, held deposits and unpaid rent are keyed into the unit records ahead of the opening billing cycle. The leasing head checks each lease before it goes live.

Messages and approvals

Your office decides how reminders read, which manager signs off a fit-out, and which investors may open the occupancy screen. Each choice is a setting, not a rebuild.

Limitations to settle before implementation

  • A landlord with one or two sheds can keep a lease file and a rent sheet.
  • A company that stores goods for clients and bills by pallet will find Warehousing Company Management Software closer.
  • A developer who only sells plots and never leases may prefer Real Estate CRM.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Plots by size and use
  • Ready-built sheds for lease
  • Built-to-suit units for one tenant
  • Plug-in infrastructure: power, water, roads
  • Common effluent and waste arrangements
  • Plots near ports and highways
  • Plug-and-play units for new manufacturers
  • Anchor tenant attraction
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements