Skip to main content
GullySystem
Manufacturing

Product Management for Sensor manufacturers

Maintain the item definitions used by sales, purchasing and stock.

Inventory Management

Does this function belong in your operation?

Use when several business processes need the same product or service definitions.

An item, service code or variant is added or changed.

A pressure transmitter family branches into ranges, output signals, process connections and cable lengths. Each valid mix has a model code. Engineering confirms the element, board and housing exist before sales quotes.

Bring the records the workflow depends on.

  • Item codes
  • Units and variants
  • Pricing and tax references

Outputs to check

  • Controlled item and variant catalogue
  • Unit and classification reference
  • Item-change approval history

Follow the product management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Request the item

    Identify its business use and check for an existing equivalent.

  2. 2. Define attributes

    Set units, variants and required classifications.

  3. 3. Review settings

    Check price, tax and stock-related references with the responsible owners.

  4. 4. Approve use

    Release the item to permitted transactions.

  5. 5. Maintain history

    Control changes and retirement without rewriting earlier documents.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Counter or sales staff

Finds the item by whatever they call it, and sees the rate and what is in stock.

Store and purchase

Adds new items with their units, rates and reorder levels before the first delivery arrives.

Owner

Controls who may change a rate. In most shops that is a very short list.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Duplicate item discovered

Review linked transactions before merging or retiring a code.

Unit changes after use

Preserve historical quantities and define any conversion for future entries.

Item discontinued

Restrict new use under the agreed rule while retaining old orders and stock history.

Can this work independently?

The catalogue can exist independently, but sales, purchasing and stock must use its identifiers to share records. Prices and taxes may be maintained in separate controlled settings. Adding an item does not create opening stock or confirm that it is available to sell.

Systems and records it connects with

  • Stock tracking and alerts: Item-location quantities and authorised stock movements.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Purchase order management: Authorised supplier commitments and open line balances.
  • Barcodes and labels: Item-code mappings and verified printed-label values.

Configure, test and introduce the workflow.

  • We look at your sheet and counter software. You provide an export, and we report on duplicates and gaps.
  • A coding scheme and categories are proposed. You approve them before anything is loaded. Duplicates are merged with your staff. Each decision is logged for later reference.
  • A sample of items is loaded into a test copy. You check units, rates and tax codes. Billing and stores read from the new list. A short session for each team closes the step.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Item codes are unique.
  • Units remain consistent across transactions.
  • Inactive items follow the agreed transaction rule.
Sensor manufacturers

How the business operates.

A pressure, temperature, proximity or gas sensor is bought for its accuracy. Customers rarely open the housing. They trust what the label and certificate say, and an auditor will ask to see what stands behind both. That trust rests on records made during calibration. Today they live on the test station or in an engineer’s folder.

Sensor models and variant codes

Hold each family with its valid ranges, outputs and connections, along with the cable lengths and labels that customers are allowed to choose. Sales picks only combinations that engineering has released. Surprises stop.

Sensing element lot control

Receive elements by lot with the readings taken on incoming samples, and issue them to builds in the order the stores should use them. A finished unit shows the element lot it carries.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Families and variant rules. Hold every family with its valid ranges, outputs, connections and cable lengths, so a custom OEM variant is released once by engineering and then quoted freely. Quotes stay inside released codes.
  • Sensing element lots. Receive elements by lot, record incoming readings against the datasheet limits and hold failing lots, so each build shows the exact lots it consumed. Lookups run both ways.
  • Bills of materials and builds. List elements, boards, housings, seals, potting compound and cable for each model, and let build orders issue the parts while recording the operator and the bench. Parts issue against the bill.
  • Calibration runs and coefficients. Store readings at every calibration point, the coefficients written to the unit and the chamber or pressure controller used, and route units outside limits to rework or scrap. Each run keeps its record.

Operational bottlenecks to check

Calibration data leaves with the engineer

Readings sit in a file on the calibration station. Two years after shipment a customer asks for a certificate, and the lab must find proof of what the bench measured on that day. The station has been replaced. The file is on a disk nobody can find.

Reference instruments fall out of date

The master gauge or reference thermometer has a calibration due date. Without a register, units are calibrated against an instrument whose own certificate has lapsed, and the work of a whole week has to be repeated from the first point.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and variant check

    The buyer names a range, an output such as 4 to 20 mA and a process thread, then the model code is checked against released variants before quoting. An unbuilt combination stops here.

  2. 2. Element receipt and incoming test

    Sensing elements arrive in lots with supplier readings, incoming samples are measured against the datasheet, and a lot that fails is held. Nothing from it reaches the bench.

  3. 3. Assembly and sealing

    Elements are bonded to boards, housed in stainless bodies and then potted or laser welded, and operators log the adhesive or potting compound batch used with each build. Every build names its bench.

  4. 4. Calibration

    Units go into a temperature chamber or onto a pressure controller, readings at each point are stored, coefficients are written, and the master instrument is recorded against the run. Failures go to rework.

  5. 5. Final test and certificate

    Accuracy, hysteresis and ingress checks are done and attached to the serial number, then a certificate prints from the stored readings. A reprint matches the original.

  6. 6. Shipment and field feedback

    Units ship with labels and certificates, and later returns and drift reports are booked against the serial number and grouped by cause for the design team. Patterns show up.

Industry reports to connect with

  • Units calibrated by day, station and technician
  • Master gauges and thermometers due or overdue
  • Element lots with failing incoming readings
  • Hysteresis and ingress failures by model and cause

Questions before implementation.

When should sensor manufacturers consider product management?

Use when several business processes need the same product or service definitions. An item, service code or variant is added or changed.

What should we bring to the requirements discussion?

Bring anonymised examples of Item codes; Units and variants; Pricing and tax references. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Maintain the item definitions used by sales, purchasing and stock. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

An item catalogue does not itself manage stock movements or fulfilment.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Item codes are unique. Use this check when reviewing the first working version.

Talk to us

Discuss product management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements