Skip to main content
GullySystem
Automotive

Purchase Order Management for Tyre dealers

Record authorised supplier orders and track what remains due.

Inventory Management

Does this function belong in your operation?

Use when purchasing commitments need control before delivery and billing.

The business agrees to purchase goods or services.

Configure tyre purchasing by the size, brand and pattern the dealer intends to stock or supply, keeping tubes, flaps and fitting consumables on their own lines. Supplier schemes and target-related terms should be visible before approval, not inferred from a later invoice. Receiving confirms the actual tyres and identification details; supplier-credit or warranty claims remain separate records.

Bring the records the workflow depends on.

  • Approved size, brand and pattern requirement
  • Tyre and accessory quantities with purchase units
  • Supplier scheme, commercial terms and promised delivery
  • Customer demand or stock requirement and approval authority

Outputs to check

  • Size-and-pattern supplier commitment
  • Pending tyre and accessory delivery list
  • Accepted receipt and scheme-charge reconciliation

Follow the purchase order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Purchase request

    The requesting team records the item or service, quantity, specification, required date and business reason. Link a stock shortage or project requirement where one exists; a request is not yet permission to commit money.

  2. 2. Manager approval

    The authorised manager checks need, budget and the applicable approval limit. Return incomplete requests for correction and retain the decision. A changed quantity or value must follow the agreed reapproval rule.

  3. 3. Purchase order

    Purchasing selects the approved supplier and records line quantities, rates, tax treatment, delivery location and commercial terms. Issue a numbered PO from the authorised request and retain the version sent to the supplier.

  4. 4. Supplier confirmation

    Record whether the supplier accepts the quantities, price and delivery date. Differences remain proposed changes until purchasing and the required approver agree them; sending the PO is not evidence of supplier acceptance.

  5. 5. Goods receipt

    The receiving team records the delivery in the goods-receipt process against the PO lines. Count accepted, damaged and rejected quantities separately. A partial receipt leaves the balance open; service purchases need the agreed service-acceptance record instead.

  6. 6. Invoice matching

    Accounts payable compares the supplier invoice with the authorised PO and the accepted receipt or service confirmation. Hold price, quantity and additional-charge differences for resolution before posting or approving the bill.

  7. 7. Payment and closure

    The authorised payment process settles the approved invoice. Record its reference, reconcile remaining receipt and billing balances, and close the PO only when fulfilled or formally cancelled. PO closure itself does not execute a bank payment.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Dealer buyer

Checks the requested range against the supplier's quotation and records the terms actually accepted.

Receiving staff

Count the tyres and accessories and capture required serial or manufacture-date information through goods receipt.

Accounts reviewer

Checks billed quantities, scheme treatment and authorised adjustments before settlement.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Partial delivery

Retain the missing sizes or patterns even if other lines from the order have arrived.

Cancellation

Review depot allocation or dispatched stock before closing the remaining commitment.

Supplier price change

Approve the revised tyre rate or scheme treatment before changing the purchase version.

Invoice mismatch

Investigate pack quantities, free-supply lines or accessory charges against accepted receipt evidence.

Approval limit

Assess the complete range purchase under the dealer's authority rule rather than splitting brands to bypass it.

Can this work independently?

Purchase orders can run as a controlled register with entered supplier and item data. Goods receipt owns physical acceptance, accounts payable owns invoice matching and posting, and the payment process owns settlement. Connecting those records provides closure evidence; issuing a PO performs none of those later actions.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock tracking and alerts: Item-location quantities and authorised stock movements.
  • Vendor management: Approved supplier identities, terms and sensitive-change controls.
  • Your accounting software: Posted financial entries and reconciliation references.

Configure, test and introduce the workflow.

  • We follow how items are requested, ordered and received. You provide recent orders and supplier lists. A summary note comes back.
  • Rates, credit periods and freight terms are entered for each supplier. The purchase assistant checks them. Stock levels that trigger an order are set item by item. The owner approves the list.
  • New orders are raised on screen while the old method runs. Differences are explained and corrected. Storekeepers receive on phones and accounts match bills. Old order books are closed.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Each received tyre line can be matched to its authorised size and pattern.
  • Supplier scheme benefits remain distinct from quantities actually received.
  • Order closure preserves unresolved shortages, credits or billed differences.
Tyre dealers

How the business operates.

A brand tyre dealer buys from the maker’s depot against a monthly target. The range runs from scooter tyres to radial truck tyres, with tubes, flaps, valves and wheel weights alongside.

Stock by size, brand and pattern

Count each size, brand, pattern and load rating with its rack location and reorder level, so the counter answers from the screen rather than a walk to the rack.

Serial and manufacture week

Record the week and serial when stock is received, and see them again on the invoice and on any claim.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Tyre stock by size and brand. Keep counts by size, brand, pattern, speed rating and load index, with rack location and reorder levels, so the counter sees availability while the customer waits.
  • Manufacture week and serial records. Record the DOT week and serial of each tyre received and sold, so tyre age and warranty can be read from a single record. Old stock is flagged for a discount before it ages out of the rack.
  • Fitting and service jobs. Open a job card for mounting, nitrogen filling, puncture repair, valve stem changes and TPMS resets. Technician and bay are noted on each card. Jobs queue by bay.
  • Alignment and balancing records. Save camber, caster and toe readings, along with balancing weights, for every vehicle visit, before and after, so the work can be shown to the owner.

Operational bottlenecks to check

Sizes are counted by eye

A size is promised on the phone and then not found on the rack when the customer arrives. The customer goes next door.

Claim tyres lose their paperwork

A failed tyre waits for inspection, but the invoice, the serial and the fitting date are in three different places. The claim stalls.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry

    The buyer names a vehicle or a size and asks for a tyre. The shop lookup runs by size, brand, pattern and speed rating, then quotes from the price list.

  2. 2. Sale and exchange

    The tyres are picked from the rack, and the serial or DOT week is noted. Old casings taken in exchange are valued and entered against the invoice, and each line is then locked against edits.

  3. 3. Fitting

    A job card opens for mounting, balancing, nitrogen filling or alignment. The technician marks each step done, and the vehicle’s odometer reading is saved. Wheel nut torque is signed off.

  4. 4. Billing

    A tax invoice covers the tyres, fitting charges and the valves or weights used. It is paid in cash, by card, transfer or wallet, or posted to the customer’s account.

  5. 5. Warranty

    If a tyre fails, the invoice and serial are found from the vehicle number. The claim goes to the maker. It is followed to a decision, with the inspection notes attached.

  6. 6. Follow-up

    Rotation and replacement reminders go to the customer by WhatsApp or SMS, based on the last fitting and the kilometres recorded, before the tread wears out.

Industry reports to connect with

  • Sales by brand, size and pattern
  • Tyres in stock by size, age and rack
  • Fitting and alignment jobs by technician
  • Old tyres taken in and their disposal

Questions before implementation.

When should tyre dealers consider purchase order management?

Use when purchasing commitments need control before delivery and billing. The business agrees to purchase goods or services.

What should we bring to the requirements discussion?

Bring anonymised examples of Approved size, brand and pattern requirement; Tyre and accessory quantities with purchase units; Supplier scheme, commercial terms and promised delivery; Customer demand or stock requirement and approval authority. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record authorised supplier orders and track what remains due. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

A purchase order does not confirm supplier acceptance or physical receipt.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Each received tyre line can be matched to its authorised size and pattern. Use this check when reviewing the first working version.

Talk to us

Discuss purchase order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements