Skip to main content
GullySystem
Automotive

Estimate/Quotation Management for Wheel alignment centres

Preserve the price and scope accepted for an alignment check and any separately proposed adjustment or related service.

Finance & Accounting

Does this function belong in your operation?

Use where assessment, adjustment and separately offered balancing need identifiable commercial decisions. A technical recommendation is not customer acceptance, and an accepted quote does not establish that work can proceed.

A customer requests a price for an alignment visit, or the technician’s findings require a different proposal.

Price the assessment and proposed work as identifiable lines, including separately offered balancing only when it is in scope. Keep the customer’s accepted revision beside the technician’s recommendation. A fleet driver or referring garage needs verified buying authority before accepting additions. Technical findings can change the proposal; the old price and the declined scope remain visible when accounts prepares the bill.

Bring the records the workflow depends on.

  • Vehicle type, requested assessment and customer-reported concern
  • Technician’s proposed scope and recorded limitations
  • Check, adjustment and separately scoped service lines
  • Current rates, accountant-confirmed tax settings and discount authority
  • Customer buyer, referring-party arrangement and acceptance evidence

Outputs to check

  • Versioned alignment-assessment and work proposal
  • Customer acceptance or decline record by line or scope
  • Unaccepted additions and discount-decision list
  • Accepted revision linked to the visit and billing input

Follow the estimate/quotation management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Price the requested assessment

    State what the initial check covers and how its charge is handled if no adjustment follows. Do not imply that every symptom is solved by the quoted service.

  2. 2. Add the technical proposal

    Use the technician’s recommendation to identify additional work. Separate balancing or outside repair from alignment rather than adding it silently to a single package line.

  3. 3. Review commercial exceptions

    Confirm the payer and any referral-account arrangement. Hold discounts outside staff authority while preserving the proposed rate and scope.

  4. 4. Issue a specific revision

    Record the version shared, its scope and its exclusions. New findings, a different vehicle or a changed service request require a traceable revision.

  5. 5. Connect acceptance to actual work

    Retain the customer buyer’s accepted version for the job card and later bill. Internal allocation and the technician’s decision about proceeding remain independent of commercial consent.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Service adviser

Builds the proposal from the requested check and recorded findings; confirms which version the customer saw.

Alignment technician

Explains the technical scope and limits without approving discounts or treating an estimate as a repair instruction.

Customer account owner

Verifies a fleet or referring-garage buyer’s authority and resolves nonstandard terms.

Billing reviewer

Compares accepted lines with actual work, retaining declined or unperformed proposals as history.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Check reveals work outside capability

Keep the completed assessment and proposed referral distinct. Review the applicable charge under the accepted terms without promising the centre will perform the repair.

Driver accepts a fleet addition

Verify explicit delegated authority before treating the response as the account’s acceptance. Driver status alone is insufficient.

Customer accepts only the check

Retain the declined adjustment or other service lines. Do not send them to the job as authorised work.

Rates change before acceptance

Issue a revised proposal and preserve the earlier one. Do not replace the customer’s accepted price with a later rate without a new agreement.

Can this work independently?

Estimates can use entered vehicle details and rates without stock or order modules. The job record supplies findings and actual work; invoicing creates the bill. Supplier repair, parts supply and payment collection are separate processes. Acceptance cannot override the technician’s decision not to proceed.

Systems and records it connects with

  • Job card: symptom, findings, scope and actual work.
  • Customer accounts: payer and delegated buyer records.
  • Invoice management: accepted rates and recorded scope changes.
  • Referral record: outside work and the responsible commissioning party.

Configure, test and introduce the workflow.

  • Compare recent check-only and adjustment quotations against the bills actually raised.
  • Test a worn-part referral, a fleet authority gap and a customer accepting only part of the proposal.
  • Reconcile a changed quote against its job and bill; confirm that staff cannot erase the accepted version.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • The job identifies the revision accepted by the authorised buyer.
  • Check and additional-work lines remain distinguishable.
  • A declined line does not become billable through quote acceptance elsewhere.
  • An internal discount decision does not imply technical readiness.
Wheel alignment centres

How the business operates.

A driver brings a steering-pull complaint; the desk has a booking, but the bay needs the vehicle identity and the earlier readings. Alignment-centre software should connect the accepted check, machine record, technician findings and customer decision. A measurement is not permission to adjust or replace anything. This scope covers fixed-site centres handling vehicles within their declared equipment and staff capability. Balancing, tyre supply, suspension repair and specialist electronic calibration remain separately scoped work. The workflows below are requirements examples to adapt with the centre, not evidence of an installed system.

Reception and referral intake

Record the complaint in the customer’s words, vehicle details, referring garage and paying account. A referral does not tell the desk who can authorise extra work. Keep the person bringing the vehicle distinct from the person accepting the bill.

Alignment bay

Attach the relevant initial measurement and the vehicle specification reference selected by the qualified technician. Preserve the machine identity and the observed condition that limits work. The technician decides whether assessment, adjustment or referral is appropriate.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Vehicle identity, complaint and referring-party record
  • Accepted check or adjustment estimate and revision history
  • Machine and specification-reference record for the visit
  • Initial and subsequent readings with visit identity and technician

Operational bottlenecks to check

A coloured result becomes a repair order

The desk needs a clear boundary between a machine result, a technical recommendation and accepted paid work. A result alone does not explain every steering complaint.

A repeat visit loses its earlier evidence

Link the new visit to the earlier job while retaining its own date, complaint and readings. A changed condition or new tyre work must not be mistaken for the same measurement event.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Accept the visit

    Confirm the vehicle type and the requested check against the centre’s declared capability. Record who commissions the work and the account to charge before treating a garage referral as an accepted job.

  2. 2. Establish the measurement context

    The technician records the vehicle reference and relevant observations. Keep a quick-check result distinct from a completed alignment record. Missing or conflicting identity details require review before evidence is attached to the job.

  3. 3. Present the findings and scope

    Retain the proposed work and its price revision. A worn component or unavailable technical reference can lead to a limited assessment or outside referral. Customer consent does not replace the technician’s decision about proceeding.

  4. 4. Record what was actually done

    Link work entries and subsequent readings to the same visit. A check-only visit stays check-only. If additional work is accepted, record its revision and who authorised it; do not overwrite the original complaint.

  5. 5. Review, explain and reconcile

    The responsible technician records the outcome and unresolved findings. Hand the relevant evidence to the permitted customer contact. Send actual chargeable lines to accounts and release bay capacity only when physical use has ended.

Industry reports to connect with

  • Checks completed without adjustment, with stated outcomes
  • Jobs awaiting customer decisions or outside repair
  • Initial and subsequent readings missing a matching visit reference
  • Bay occupation and equipment-block exceptions

Questions before implementation.

When should wheel alignment centres consider estimate/quotation management?

Use where assessment, adjustment and separately offered balancing need identifiable commercial decisions. A technical recommendation is not customer acceptance, and an accepted quote does not establish that work can proceed. A customer requests a price for an alignment visit, or the technician’s findings require a different proposal.

What should we bring to the requirements discussion?

Bring anonymised examples of Vehicle type, requested assessment and customer-reported concern; Technician’s proposed scope and recorded limitations; Check, adjustment and separately scoped service lines; Current rates, accountant-confirmed tax settings and discount authority; Customer buyer, referring-party arrangement and acceptance evidence. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Preserve the price and scope accepted for an alignment check and any separately proposed adjustment or related service. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Quotation records do not establish a diagnosis, reserve ready equipment, authorise unaccepted repairs or promise a particular driving outcome.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. The job identifies the revision accepted by the authorised buyer. Use this check when reviewing the first working version.

Talk to us

Discuss estimate/quotation management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements