Skip to main content
GullySystem
Manufacturing

Fixed Asset Register for Aluminium die casting companies

Keep owned assets identifiable by value, location and custodian.

Assets and Fleet

Does this function belong in your operation?

Use when equipment, vehicles or other fixed assets need ownership and custody records.

An asset is acquired, transferred or disposed of.

Die casting machines, furnaces, trim presses and spare dies are listed with values and locations. Service dates and breakdowns are logged. Owners see which cell has the oldest machine.

Bring the records the workflow depends on.

  • Asset identifiers and purchase records
  • Locations and custodians
  • Accounting and disposal rules

Outputs to check

  • Asset and custody register
  • Movement and physical-check history
  • Accountant-ready acquisition and disposal schedule

Follow the fixed asset register workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Register acquisition

    Record the asset, purchase reference and approved value.

  2. 2. Assign custody

    Set the tag, location and responsible person.

  3. 3. Track movement

    Retain transfers and handover acknowledgements.

  4. 4. Verify physically

    Compare the register with actual assets and investigate differences.

  5. 5. Approve disposal

    Record the authorised retirement and pass financial adjustments to accounts.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Accounts assistant

Adds assets from purchase bills and gives the accountant the schedule they want.

Office or admin manager

Issues equipment to people and moves it between branches without losing track.

Owner

Sees what was bought this year and what has quietly disappeared.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Asset cannot be found

Record the discrepancy and investigation owner before any write-off.

Shared asset changes custodian

Capture the handover and effective location without creating another asset.

Disposal requested

Hold retirement until authorised and retain the supporting financial or physical evidence.

Can this work independently?

An asset register can operate independently from accounting with approved purchase values and identifiers. Purchasing supplies acquisition evidence; maintenance tracks service; accounting determines depreciation and disposal entries. A physical transfer changes custody, not necessarily ownership or accounting value.

Systems and records it connects with

  • Asset AMC tracking: Asset coverage dates, service visits and renewal status.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Finance and accounting reporting: Ledger-based period totals and reconciliation outputs.
  • Vendor management: Approved supplier identities, terms and sensitive-change controls.

Configure, test and introduce the workflow.

  • We start from a walk around your premises. You provide purchase bills and any old list, and get a draft register to correct.
  • Asset classes, depreciation methods and rates are set as your accountant directs. Their written sign-off is requested. Tags are printed in batches. Staff stick them on, and unmatched tags are traced.
  • Cost and accumulated depreciation come from your books. A trial schedule is printed. Compare it with last year’s. Purchases and transfers are entered as they happen. Practice for the accounts team comes before the next closing.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Assets have unique identifiers.
  • Transfers retain the old and new custodian.
  • Disposals reconcile with approved accounting entries.
Aluminium die casting companies

How the business operates.

A die casting cell is fast and unforgiving. A furnace holds molten alloy, a machine fires it into a steel die in seconds, and a trim press removes runners and overflows. A hundred castings an hour leave the cell. Small shifts in die temperature, spray or metal quality show up as porosity or cold shuts.

Alloy lot and melt record

Record ingot lots, returned scrap, degassing and the chemistry sample for each melt, and tie them to the shots cast.

Die register and shot counts

Count shots per die, log cleans, polishing and repairs, and flag a die before it passes its limit.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Part list and call-offs. Hold each casting with its drawing revision, alloy grade such as A380 or ADC12, die and route. Load call-offs and revisions by week.
  • Alloy and ingot stock. Receive ingot by heat lot, issue it to melts, and keep returned gates and dross on separate accounts.
  • Melt and chemistry record. Record each melt, its charge, degassing time and spectrometer sample, then release it to the holding furnace once the chemistry passes.
  • Machine and die planning. Plan machines by clamping tonnage and dies by availability and shot count, and show which die change comes next to the setters.

Operational bottlenecks to check

Alloy lots mix in the furnace

Fresh ingot and returned runners are charged together into one furnace. When a casting fails chemistry, the lot that fed that melt is unclear, and every casting from the shift comes under doubt.

Die life is counted on a tag

Shots run on a die decide when it needs a clean, a polish or a repair. The tag is updated at changeover, but a die pulled off the machine in a hurry keeps yesterday’s count and nobody notices until it cracks.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Call-off and plan

    Call-offs are loaded by part and week. The planner assigns a machine, a die and an ingot lot, then checks the die’s shot total against its cleaning limit before the setter is told.

  2. 2. Melt

    Ingot and returned gates are charged, degassed with a rotary impeller and sampled for the spectrometer. A passing chemistry result releases the melt to the holding furnace.

  3. 3. Casting run

    The operator records the die, the plunger speed settings, the intensification pressure and the shots. Good and rejected counts are entered when the run closes.

  4. 4. Trim and remelt

    Castings go to the trim press while biscuits, runners and overflow wells are weighed back for remelt. Yield per part updates on the spot.

  5. 5. Test and machine

    Samples go for X-ray, density index or helium leak checks. Passed lots follow the route card to machining, deburring or impregnation.

  6. 6. Dispatch

    Crates are counted, labelled and loaded. Once the truck leaves, the invoice and the dispatch record close the call-off.

Industry reports to connect with

  • Call-offs against shipments by part and week
  • Melts with chemistry results and castings made
  • Shots and rejects by die
  • Metal yield by part and by melt

Questions before implementation.

When should aluminium die casting companies consider fixed asset register?

Use when equipment, vehicles or other fixed assets need ownership and custody records. An asset is acquired, transferred or disposed of.

What should we bring to the requirements discussion?

Bring anonymised examples of Asset identifiers and purchase records; Locations and custodians; Accounting and disposal rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Keep owned assets identifiable by value, location and custodian. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Valuation, depreciation policy and tax treatment remain with your accountant.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Assets have unique identifiers. Use this check when reviewing the first working version.

Related functions for aluminium die casting companies.

    Talk to us

    Discuss fixed asset register for your business.

    Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

    What happens after you share your requirements

    1. We review your brief and the systems you already use.
    2. We clarify the workflow, missing information and the work to consider first.
    3. The proposed scope sets out the deliverables, responsibilities and dependencies.
    4. Review the scope and commercial terms before deciding whether to proceed.

    Start with your requirements

    Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

    Share your requirements