Skip to main content
GullySystem
Manufacturing

Order Management for Aluminium die casting companies

Track a confirmed order through fulfilment and billing.

CRM

Does this function belong in your operation?

Use when sales, operations and billing share confirmed orders.

A customer confirms goods or work.

Customer orders for housings and brackets are booked by casting number, quantity and delivery date. Schedules from the buyer are updated as they arrive. Planners see which casting is behind.

Bring the records the workflow depends on.

  • Order lines
  • Commercial terms
  • Fulfilment rules

Outputs to check

  • Confirmed order and revision record
  • Outstanding fulfilment list
  • Delivered and billed reconciliation

Follow the order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Capture confirmation

    Record accepted quantities, price and terms.

  2. 2. Check release conditions

    Review credit, approval and any stock or capacity requirements.

  3. 3. Authorise fulfilment

    Pass the confirmed lines to dispatch, production or service delivery.

  4. 4. Record partial progress

    Compare accepted fulfilment evidence with the remaining order balance.

  5. 5. Reconcile and close

    Match billing and approved cancellations before closing the commitment.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Sales executive

Takes the order and confirms the delivery date. Tells the buyer when half has gone.

Storekeeper

Picks against the order. Records short quantity. Closes the line only when it is out of the gate.

Accounts assistant

Bills the dispatched quantity and keeps the advance adjusted against the right order.

Owner

Sees orders pending beyond their promised date, and which customer is waiting longest.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Partial delivery

Record the supplied portion and retain the balance against its original line.

Customer cancels remaining work

Obtain approval and close only the unfulfilled portion.

Agreed price changes

Version the order and review whether invoices or advances need separate adjustment.

Can this work independently?

Orders can be entered from an accepted customer instruction without CRM. Stock, production, service delivery and invoicing connect through order-line references. Each owns its execution record; an order status should reflect their confirmed outcomes rather than assume delivery from a planned date.

Systems and records it connects with

  • Quote and proposal management: Commercial proposal versions and acceptance details.
  • Stock tracking and alerts: Item-location quantities and authorised stock movements.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Accounting software: Posted financial entries and reconciliation references.

Configure, test and introduce the workflow.

  • Walk us through an order from call to payment. A note shows the steps and the documents.
  • Decide which changes need approval. A test order can then be taken, with your own staff at the keys. Share orders still pending. The trial import shows quantities dispatched and pending for the storekeeper to check.
  • Sales and the store team practise a part delivery. A note for the counter follows. New orders go through the system from the date you agree. Changes from the opening week are reviewed together. Habits settle quickly.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Partial fulfilment leaves correct balances.
  • Term changes follow approval.
  • Billing follows approved quantities.
Aluminium die casting companies

How the business operates.

A die casting cell is fast and unforgiving. A furnace holds molten alloy, a machine fires it into a steel die in seconds, and a trim press removes runners and overflows. A hundred castings an hour leave the cell. Small shifts in die temperature, spray or metal quality show up as porosity or cold shuts.

Alloy lot and melt record

Record ingot lots, returned scrap, degassing and the chemistry sample for each melt, and tie them to the shots cast.

Die register and shot counts

Count shots per die, log cleans, polishing and repairs, and flag a die before it passes its limit.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Part list and call-offs. Hold each casting with its drawing revision, alloy grade such as A380 or ADC12, die and route. Load call-offs and revisions by week.
  • Alloy and ingot stock. Receive ingot by heat lot, issue it to melts, and keep returned gates and dross on separate accounts.
  • Melt and chemistry record. Record each melt, its charge, degassing time and spectrometer sample, then release it to the holding furnace once the chemistry passes.
  • Machine and die planning. Plan machines by clamping tonnage and dies by availability and shot count, and show which die change comes next to the setters.

Operational bottlenecks to check

Alloy lots mix in the furnace

Fresh ingot and returned runners are charged together into one furnace. When a casting fails chemistry, the lot that fed that melt is unclear, and every casting from the shift comes under doubt.

Die life is counted on a tag

Shots run on a die decide when it needs a clean, a polish or a repair. The tag is updated at changeover, but a die pulled off the machine in a hurry keeps yesterday’s count and nobody notices until it cracks.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Call-off and plan

    Call-offs are loaded by part and week. The planner assigns a machine, a die and an ingot lot, then checks the die’s shot total against its cleaning limit before the setter is told.

  2. 2. Melt

    Ingot and returned gates are charged, degassed with a rotary impeller and sampled for the spectrometer. A passing chemistry result releases the melt to the holding furnace.

  3. 3. Casting run

    The operator records the die, the plunger speed settings, the intensification pressure and the shots. Good and rejected counts are entered when the run closes.

  4. 4. Trim and remelt

    Castings go to the trim press while biscuits, runners and overflow wells are weighed back for remelt. Yield per part updates on the spot.

  5. 5. Test and machine

    Samples go for X-ray, density index or helium leak checks. Passed lots follow the route card to machining, deburring or impregnation.

  6. 6. Dispatch

    Crates are counted, labelled and loaded. Once the truck leaves, the invoice and the dispatch record close the call-off.

Industry reports to connect with

  • Call-offs against shipments by part and week
  • Melts with chemistry results and castings made
  • Shots and rejects by die
  • Metal yield by part and by melt

Questions before implementation.

When should aluminium die casting companies consider order management?

Use when sales, operations and billing share confirmed orders. A customer confirms goods or work.

What should we bring to the requirements discussion?

Bring anonymised examples of Order lines; Commercial terms; Fulfilment rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track a confirmed order through fulfilment and billing. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Stock, production and carrier connections need agreed scope.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Partial fulfilment leaves correct balances. Use this check when reviewing the first working version.

Talk to us

Discuss order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements