Skip to main content
GullySystem
Healthcare

Job Work Management for Audiology clinics

Track material sent to an outside processor and returned after work.

Manufacturing

Does this function belong in your operation?

Use when your materials leave for processing and must be reconciled on return.

A production stage is subcontracted with material supplied by your business.

Devices and impressions sent to a maker or laboratory are tracked by job slip, due date and receipt until the patient is told.

Bring the records the workflow depends on.

  • Vendor and process details
  • Material quantities
  • Return and wastage terms

Outputs to check

  • Subcontract dispatch and return register
  • Processor-held material balance
  • Job-work charge reconciliation

Follow the job work management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define outside processing

    Record the vendor, process and expected return terms.

  2. 2. Dispatch material

    Identify quantities, lots and the linked delivery document.

  3. 3. Track work outside

    Keep material balances and promised returns by processor.

  4. 4. Receive and inspect

    Record accepted output, waste and unresolved differences.

  5. 5. Reconcile charges

    Match processing bills and close only the settled material balance.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Writes the delivery note, receives the lots and knows which vendor is holding what this morning.

Production in-charge

Chases the process that is holding a job, and plans around the fortnight a coater takes.

Accounts assistant

Compares processing charges with authorised quantities and records unresolved material or rate differences.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Partial return

Record received output and leave the remaining material balance with the processor.

Excess wastage

Hold the difference for investigation and authorised disposition.

Material sent to another processor

Record an approved transfer with both locations identifiable instead of closing the original job.

Can this work independently?

This can track outside processing with entered dispatch and receipt records. Stock and accounting connections reconcile material ownership and processing charges; quality control decides acceptance. A vendor's completion message is not a physical return or proof that the returned output meets specification.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Vendor bills: Supplier invoice lines and authorised posting status.
  • Purchase returns: Approved supplier-return quantities and adjustment references.

Configure, test and introduce the workflow.

  • We list the outside processes you use and the vendors for each. You describe how notes and returns are handled today. A flow diagram comes back for your approval.
  • Rates, process names and wastage allowances are entered. You confirm them with the production team. Material currently lying outside is loaded from your registers. The store team checks balances with the vendors. Mistakes surface early.
  • New outward notes are made on the screen while the old book continues. Returns are booked and compared. The team is trained. The paper book is retired. The oldest balances are reviewed at the next meeting.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Sent and returned quantities reconcile.
  • Material held by each processor remains visible.
  • Charges link to the relevant job.
Audiology clinics

How the business operates.

Hearing clinics of every size keep tests, devices and aftercare in GullySystem, configured around their own booths and catalogue. Audiologists, dispensers and reception all open the same patient file. Each record carries history, audiograms, devices with serial numbers and warranties, trial dates, repairs and balances. Recalls for retests and warranty checks are listed for the desk.

Appointments by audiologist and booth

Book tests, fittings, fitting adjustments and follow-ups by audiologist and sound booth, with reminders to the patient by text. Cancelled slots return to the diary for the next booking.

Patient history and referrals

Keep case history, symptoms, referral source from a family doctor or ear, nose and throat clinic, and notes on one dated record, so each visit starts from what was found before.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Appointments by audiologist and booth. Book tests, fittings, fitting adjustments and follow-ups by audiologist and sound booth, with reminders to the patient by text. Cancelled slots return to the diary for the next booking.
  • Patient history and referrals. Keep case history, symptoms, referral source from a family doctor or ear, nose and throat clinic, and notes on one dated record, so each visit starts from what was found before.
  • Audiograms and test files. Attach audiogram, tympanometry and speech-in-noise files exported from your audiometer software to the date of each test, and compare the latest result with the earlier curves at a glance.
  • Device and serial register. Record each device with model, side, serial number, fitting date and warranty end, and see every hearing aid a patient has owned. Receivers, domes and chargers are listed under it.

Operational bottlenecks to check

Test results are held apart

Audiograms stay inside the audiometer software on a single PC, while case history is on a card and the device sold is in a sales book. Nobody sees the whole patient.

Device and serial details are untraced

A repair or warranty claim needs the model, the serial number of the receiver and the fitting date. Staff search through paper invoices and manufacturer emails to find them.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Booking

    Bookings come in by phone, through the website or from a referring family doctor or ear, nose and throat specialist. The visit is placed with an audiologist and a booth, and the referral letter is attached.

  2. 2. Assessment

    The audiologist records history and symptoms such as tinnitus or fullness, runs otoscopy and pure tone tests, and saves the audiogram to the record. Tympanometry results go in beside it.

  3. 3. Advice and quotation

    If a device is advised, the patient receives a quotation for a model and accessories and pays a deposit. Receiver-in-canal, behind-the-ear and in-the-ear styles are priced from your catalogue.

  4. 4. Ordering and fitting

    The device is ordered, programmed and fitted. Side, model and serial number are recorded with the warranty date, and real-ear measurement readings are saved so later adjustments start from them.

  5. 5. Trial and adjustment

    A follow-up is set. Settings changed at each visit, such as gain or a new program, are noted, and the patient decides whether to keep the device or return it within the trial.

  6. 6. Aftercare and recall

    Repairs, ear moulds, wax guards and batteries are handled from the record. Yearly retests and warranty checks are listed for the desk, with the patient’s preferred reminder channel shown.

Industry reports to connect with

  • Devices sold by manufacturer, model and period
  • Loan trials open and ending this week
  • Repairs out with manufacturers and overdue
  • Warranties ending in the next quarter

Questions before implementation.

When should audiology clinics consider job work management?

Use when your materials leave for processing and must be reconciled on return. A production stage is subcontracted with material supplied by your business.

What should we bring to the requirements discussion?

Bring anonymised examples of Vendor and process details; Material quantities; Return and wastage terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track material sent to an outside processor and returned after work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This concerns outsourced physical processing, not general professional-services subcontracting.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Sent and returned quantities reconcile. Use this check when reviewing the first working version.

Talk to us

Discuss job work management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements