Skip to main content
GullySystem
Automotive

Job Cards for Auto repair shops

Keep the inspection, work, parts and status of a service job together.

Field Service

Does this function belong in your operation?

Use when service or repair work needs a record beyond an appointment.

A repair or field-service request is accepted.

A mixed-brand workshop needs the owner’s complaint, the mechanic’s finding and the accepted repair to remain separate. Link supplier parts and any outside work to that card, retaining substitute or customer-supplied components explicitly. On a return visit, attach the new complaint to the previous job. Closing the card must not remove declined work or imply that a disputed bill has been settled.

Bring the records the workflow depends on.

  • Vehicle identity, current customer and complaint in the customer’s own words.
  • Inspection findings, approved estimate and decisions on additional or refused work.
  • Technician, parts issues, returns and the required completion evidence.

Outputs to check

  • Vehicle repair card with the authorised work and its status.
  • Parts and labour reconciliation with technical completion and billing handoffs kept separate.

Follow the job cards workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Open the service job

    Capture the customer, asset and reported issue.

  2. 2. Inspect and estimate

    Record findings and proposed work before chargeable changes.

  3. 3. Record separate decisions

    Retain customer acceptance for the work and chargeable additions. Internal repair release and any manufacturer coverage decision remain separate records with their own responsible person.

  4. 4. Perform the work

    Record labour, parts, tests and unresolved findings.

  5. 5. Close and hand over

    Issue completion evidence and send approved billing inputs to accounts.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Service adviser

Keeps the vehicle, complaint and scope decision together and communicates changed findings.

Technician and parts owner

Record work performed and parts issued or returned against the repair reference.

Supervisor and accounts

The supervisor owns the technical release evidence; accounts bills the accepted chargeable lines and records settlement.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Additional repair is proposed

Retain the finding and obtain the required decision before extending chargeable work.

Parts are unavailable or unsuitable

Keep the affected operation waiting and identify the purchasing or fitment decision needed.

The vehicle returns with a complaint

Link the new report to the earlier repair rather than replacing its findings and acceptance record.

Can this work independently?

The repair card can run from entered vehicle, customer and work records without installing stock or billing modules. Link part issues, outside-work references and approved bill lines where those records exist. A separate register needs reconciliation at each handoff; closing the repair does not establish customer acceptance or payment.

Systems and records it connects with

  • Workshop diary: confirmed arrival and capacity changes.
  • Estimates: accepted repair scope, later additions and refused lines.
  • Parts stock: actual issues, unused returns and held components.
  • Billing: approved charge lines, invoice references and receipt allocation.

Configure, test and introduce the workflow.

  • Follow a recent repair from the arrival sheet to the customer bill. Identify who records a verbal approval and who accepts an outside-service return.
  • Build a trial card using the shop’s vehicle, part and labour references. Test an unavailable part, a substitute, a declined addition and a returning complaint.
  • Compare the card with actual shelf movements and approved billing lines. Agree the changeover and record owner after the workshop reconciles its open repairs.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • A part issue and its unused return reconcile against the same repair card.
  • Declined work stays visible without entering the approved billing handoff.
  • Technical closure, customer handover and payment can be distinguished.
Auto repair shops

How the business operates.

An independent repair shop works with a mixed vehicle population and jobs whose final scope can change after inspection. Its central record is the repair card: what the owner reported, what the mechanic found, what was approved and what was actually fitted. Connect that card to parts purchasing and billing before adding more dashboards. A workshop should be able to explain a disputed line without reconstructing it from messages.

Intake and estimating

Capture the vehicle and symptom, agree the inspection scope and record the customer’s decision. A price discussed before diagnosis is distinguishable from an accepted repair estimate.

Repair bays and outside work

The technician records findings and work progress. If machining, specialist testing or another operation leaves the shop, keep its supplier instruction and return evidence attached to the repair.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Vehicle intake sheet with registration or other reliable identifier, customer-reported symptoms and observed condition.
  • Diagnostic findings and the separately agreed inspection or investigation scope.
  • Accepted estimate, later revisions and recorded refusal of proposed work.
  • Part reference, supplier, application check and any customer-supplied component note.

Operational bottlenecks to check

The alternative part reaches the bay first

A supplier substitute can differ from the quoted reference. The record needs a fitment check and any changed commercial acceptance before installation.

A phone approval has no agreed scope

A note saying approved cannot show which labour and parts were accepted. Keep the estimate version and the customer response together.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Agree what the shop will investigate

    Record the complaint and the initial inspection scope. Identify work the shop is not equipped or authorised to undertake.

  2. 2. Diagnose and present the repair choice

    Attach findings to an itemised estimate. Keep alternative parts or proposed outside work identifiable so the owner knows which version is being accepted.

  3. 3. Confirm parts and the working slot

    Check availability, fitment evidence and the technician’s current jobs. Do not mark a part fitted merely because it has been ordered.

  4. 4. Record the repair and changed findings

    Log labour, parts used and outside-service returns. Put an unexpected addition back through approval rather than adding it only at billing.

  5. 5. Check the job before release

    The responsible person records completion checks and remaining concerns. Work declined by the owner stays on the record with its decision.

  6. 6. Bill, settle and keep the history

    Issue the accepted charge lines and allocate receipts. Link a later complaint to the original card, preserving its earlier diagnosis and evidence.

Industry reports to connect with

  • Vehicles waiting for diagnosis, customer decision, parts, outside work or handover.
  • Approved estimate lines compared with actual repair and billed lines.
  • Parts purchased for a job but not fitted, returned or retained with a reason.
  • Returning complaints by original job and unresolved action owner.

Questions before implementation.

When should auto repair shops consider job cards?

Use when service or repair work needs a record beyond an appointment. A repair or field-service request is accepted.

What should we bring to the requirements discussion?

Bring anonymised examples of Vehicle identity, current customer and complaint in the customer’s own words.; Inspection findings, approved estimate and decisions on additional or refused work.; Technician, parts issues, returns and the required completion evidence. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Keep the inspection, work, parts and status of a service job together. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

A job card records work and does not itself certify repair quality or equipment safety.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. A part issue and its unused return reconcile against the same repair card. Use this check when reviewing the first working version.

Talk to us

Discuss job cards for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements