Skip to main content
GullySystem
Manufacturing

Bill of Materials for Automation equipment manufacturers

Define the materials and quantities needed for a manufactured item.

Manufacturing

Does this function belong in your operation?

Use when output quantities depend on a repeatable material or component list.

A product or production recipe is created or revised.

Pneumatic cylinders, sensors, servo drives and frames are listed under each station of the machine. Changes raise a revision number. Purchasing orders from the latest revision only, so a superseded part is not bought.

Bring the records the workflow depends on.

  • Finished-item codes
  • Component quantities and units
  • Revision and waste rules

Outputs to check

  • Approved material and subassembly list
  • Versioned material cost basis
  • Quantity-exploded requirement sheet

Follow the bill of materials workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define the output

    Identify the finished item, production quantity and unit.

  2. 2. List components

    Record materials, subassemblies and quantity conversions.

  3. 3. Review allowances

    Approve waste factors and permitted substitutes.

  4. 4. Release a version

    Retain the approved definition and its effective use.

  5. 5. Calculate requirements

    Expand the selected version for a planned quantity and pass shortages to planning or purchasing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Estimator

Defines the material quantities and approved version used to cost a finished item or quotation.

Production in-charge

Sees what a job needs before it is released to the floor.

Storekeeper

Issues against the list. Anything beyond it is asked for in writing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Component unavailable

Use only an approved substitute and retain its effect on cost and specification.

Design revised after release

Keep existing jobs on their approved version unless a controlled change is authorised.

Unit conversion inconsistent

Resolve the conversion before calculating requirements or issuing material.

Can this work independently?

A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.

Systems and records it connects with

  • Production planning: Demand, planned quantities and resource or material constraints.
  • Work orders: Released production jobs, material issues and output records.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Stock: Item-location quantities and authorised stock movements.

Configure, test and introduce the workflow.

  • You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
  • You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
  • The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Component units are consistent.
  • Production uses the approved version.
  • Revisions preserve the earlier material definition.
Automation equipment manufacturers

How the business operates.

These machines are one-offs or short runs. The buyer describes a product and a target cycle time, and the maker designs a station that assembles, tests or packs it. Parts come from machine shops, catalogue suppliers and the maker’s own workshop. Weeks before delivery go on chasing a few late items. A frame cannot be closed until one bracket arrives.

Machine estimate and cost plan

Estimate design hours, machined parts, bought-in components and assembly time, then keep the figure as the budget against which every purchase order and every fitter’s hour is later measured.

Machine bill of materials with revision

Hold each assembly, part and supplier item with its drawing revision, and show which items changed after release.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Machine enquiry and estimate. Estimate design hours, machined parts, bought-in components, assembly and test time on one sheet, and keep the figure as the project budget that posted cost is compared with later. No second copy.
  • Parts list with revision. Hold each assembly, machined part and catalogue item with its revision letter, and after release a change shows what moved and which open orders still carry the old drawing. Nothing is overwritten.
  • Machined part orders. Release a drawing set to the workshop or to an outside machinist, with the due date and the stock material named per plate. Returned shafts and brackets are booked in line by line. Short deliveries stay open.
  • Component purchasing and receipt. Order catalogue items straight from the released list, follow promised dates, and receive each pneumatic cylinder, proximity sensor or servo motor against the machine it belongs to. Gaps are visible.

Operational bottlenecks to check

The bill of materials changes during build

Designers revise parts while the workshop is already machining. Plates cut to the old drawing are scrapped and new ones ordered, and the difference sits in no single record, so the true cost of the revision is never read.

Bought-in parts arrive out of sequence

Cylinders arrive on Monday, sensors the week after, and the servo motors only when the supplier clears its own backlog. Fitters wait for a bracket. Or they build around the gap and strip it back later.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Concept and estimate

    The customer’s product drawing, target cycle rate and floor layout are logged, designers sketch a concept, and the estimate covers design, machined parts, bought-in items, assembly and test. Scope is fixed here.

  2. 2. Design release

    Assemblies, parts lists and the pneumatic and electrical schematics are released with a revision letter, and purchasing and the workshop receive only the released set. Drafts stay hidden.

  3. 3. Machining and buying

    Plates, shafts and brackets go to the workshop or to outside machinists with due dates. Catalogue items such as cylinders, servo motors and light curtains are ordered and received against the machine. Gaps show early.

  4. 4. Assembly

    Fitters build the frame and stations, electricians wire the panel and route the air piping, and programmers load the PLC sequence and HMI screens. Each stage logs its hours. Nothing moves on without a sign-off.

  5. 5. Run-off and buy-off

    The machine runs the customer’s own parts at the agreed cycle rate while output, rejects and every remark are recorded against the run-off sheet. Punch items close one by one.

  6. 6. Shipping and support

    The machine is dismantled, crated, shipped and installed on the customer’s floor, and the spares list and serial number stay on file for after-sales calls. Support starts from that file.

Industry reports to connect with

  • Machines on the floor by build stage and due date
  • Missing catalogue items per machine and supplier
  • Outside machining due and overdue by machinist
  • Estimate against posted cost by machine

Questions before implementation.

When should automation equipment manufacturers consider bill of materials?

Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.

What should we bring to the requirements discussion?

Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.

Talk to us

Discuss bill of materials for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements