Skip to main content
GullySystem
Automotive

Job Cards for Battery dealers

Keep the inspection, work, parts and status of a service job together.

Field Service

Does this function belong in your operation?

Use when service or repair work needs a record beyond an appointment.

A repair or field-service request is accepted.

A flat battery brought for testing or slow charging gets a job card with the symptom, the charger bay and the hours on charge. Hydrometer and load test results are noted. The customer collects against the card.

Bring the records the workflow depends on.

  • Customer and asset details
  • Reported issue
  • Work and parts approval rules

Outputs to check

  • Service job and inspection record
  • Approved parts and labour statement
  • Completion and billing handoff

Follow the job cards workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Open the service job

    Capture the customer, asset and reported issue.

  2. 2. Inspect and estimate

    Record findings and proposed work before chargeable changes.

  3. 3. Obtain approval

    Retain the customer's or authorised manager's decision.

  4. 4. Perform the work

    Record labour, parts, tests and unresolved findings.

  5. 5. Close and hand over

    Issue completion evidence and send approved billing inputs to accounts.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Service advisor

Opens the card, builds the estimate, records approval and tells the customer where their machine stands.

Technician

Reads the complaints and inspection notes, and sees the parts issued to their job.

Storekeeper

Issues against a card number and not to a name shouted from the bay.

Accounts assistant

Bills from the card line for line, and records what was paid.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Extra repair discovered

Record the finding and obtain approval before adding chargeable work.

Part unavailable

Keep the job waiting with the required item identified.

Customer declines work

Record what was inspected, what was refused and the authorised closing outcome.

Can this work independently?

Job cards can run with entered customer and asset records. Scheduling assigns staff, stock controls parts, and invoicing creates the bill from approved work. Closing a technical job should be distinguishable from financial settlement or customer acceptance where those occur later.

Systems and records it connects with

  • Estimates and quotations: Approved estimate lines, revisions and acceptance references.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Spare-parts stock: Item-location quantities and authorised stock movements.
  • Technician scheduling: Assigned field jobs and technician availability.

Configure, test and introduce the workflow.

  • We trace a vehicle from gate to delivery. You show us today’s slips, and we return the card layout we propose.
  • Stages and who may change them are agreed. A chart on a page is yours to approve. The parts list and labour rates are loaded. Storekeepers test issuing against dummy cards.
  • Cards run alongside paper for a stretch. Differences are discussed with advisors and technicians. Cards become the only record. The workshop team gets a short practice on phones.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Parts usage links to the job.
  • Unapproved additional work remains flagged.
  • Completion retains the service record.
Battery dealers

How the business operates.

A serial number and a date code are stamped on the lid of each battery that leaves the counter. Months later it returns with a dead cell, and the claim stands or falls on a record the dealer must find in seconds.

Battery stock by brand, model and serial

Hold stock by brand, model, ampere-hour rating and chemistry, with serial and date code keyed in on receipt. The counter then hands out the oldest unit first.

Sale and warranty record

Tie every sale to a serial and a customer, with the free-replacement window and the pro-rata period read from the brand’s terms. A claim opens from the invoice, never from a lost card.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Battery stock by brand and serial. Hold stock by brand, model, ampere-hour rating and chemistry, with serial and date code on every unit, and scans at receipt and sale keep the shelf count honest. No stock-taking guesswork.
  • Date codes and stock ageing. List units by manufacture date and flag the ones nearing the age at which charge is lost, so the counter picks the oldest unit first. Shelf life is protected.
  • Counter billing with exchange rebate. Quote two rates for each model, with or without an old core. The rebate prints on the bill, and the serial is added to the invoice line so the warranty record starts at the counter.
  • Sale and warranty record. Tie every serial to a buyer and a date, and read the free-replacement and pro-rata periods from the brand’s terms, so a claim opens straight from the invoice. Proof is already filed.

Operational bottlenecks to check

Serials sit only on the warranty card

The customer loses the card. The dealer cannot show which 150Ah tubular inverter battery went out, or on what date, and the brand rejects the claim.

Old batteries are not counted

Exchange rebates are given at the counter, yet the count of scrap cores received, load-tested, held and sold to the smelter’s buyer is nobody’s figure.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Receive stock

    Stock arrives against the supplier’s delivery note. Serial and date code are keyed or scanned, and each unit goes on the shelf as a record the counter can find by rating and make.

  2. 2. Quote and bill

    The counter quotes a rate with and without an old core, raises the bill and ties the serial to the buyer’s name and phone. The warranty period starts from that day.

  3. 3. Take back the old core

    The returned battery is logged with brand, rating, terminal condition and weight. The rebate shows on the bill, and the core goes into the exchange register to wait for its load test.

  4. 4. Handle a warranty case

    The bench records open-circuit voltage and the drop test result, tags the unit and sends it to the service centre, and the customer is told where the battery stands. No guessing.

  5. 5. Collect trade dues

    Garage and electrician accounts show the balance by age. A reminder fires ahead of the credit ceiling, receipts are posted against bills, and old dues stay visible on the list for the collector.

  6. 6. Claim brand schemes

    Purchases and sales are set against each brand’s slab, and the claim form is prepared from the record when the period closes. Targets are checked as the month runs.

Industry reports to connect with

  • Stock by brand, model, serial and manufacture date
  • Batteries sold by serial, buyer and warranty end date
  • Cores received, tested, held and sold, with rebate allowed
  • Warranty cases by stage, brand and age

Questions before implementation.

When should battery dealers consider job cards?

Use when service or repair work needs a record beyond an appointment. A repair or field-service request is accepted.

What should we bring to the requirements discussion?

Bring anonymised examples of Customer and asset details; Reported issue; Work and parts approval rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Keep the inspection, work, parts and status of a service job together. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

A job card records work and does not itself certify repair quality or equipment safety.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Parts usage links to the job. Use this check when reviewing the first working version.

Talk to us

Discuss job cards for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements