Skip to main content
GullySystem
Manufacturing

Invoice Management for Blow moulding companies

Create and track invoices against billed goods or work.

Finance & Accounting

Does this function belong in your operation?

Use when bills need links to orders, delivery or completed work.

A supply or milestone becomes billable.

Invoices carry the container design, quantity, rate per thousand and tooling charges where they apply. Returns for failed leak tests net off the next invoice. Statements show open pallets per filler.

Bring the records the workflow depends on.

  • Customer details
  • Approved billing lines
  • Numbering and tax settings

Outputs to check

  • Issued invoice register
  • Customer outstanding statement
  • Billing and receipt reconciliation

Follow the invoice management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify billable work

    Use the approved order, delivery or milestone reference.

  2. 2. Prepare invoice lines

    Check customer details, quantities, rates and tax settings.

  3. 3. Approve and issue

    Assign the authorised number and retain the issued document.

  4. 4. Send required handoffs

    Pass applicable documents to accounting or electronic registration processes.

  5. 5. Track settlement

    Allocate receipts and handle disputes or credits without overwriting the issued invoice.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Accounts assistant

Raises the day’s bills, applies receipts and works the overdue list from the top.

Sales executive

Sees whether their customer has paid before they ask for the next order. It saves an awkward conversation.

Owner

Sees what was billed this month, what was collected, and the difference still outstanding.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Duplicate billing request

Check the source order or milestone before creating another invoice.

Customer disputes a line

Retain the issued document and use the approved correction or credit process.

Partial payment

Allocate the receipt and leave the remaining amount outstanding without marking the invoice fully settled.

Can this work independently?

Invoicing can work from entered approved lines without order or stock modules. Connections bring in accepted quantities and pass receivables to accounting. e-Invoicing, payment collection and stock dispatch are distinct processes; issuing a bill does not confirm any of them occurred.

Systems and records it connects with

  • Receipts management: Recorded customer payments and invoice allocations.
  • E-invoicing: Applicable invoice-registration references and response status.
  • Credit control: Customer limits, current exposure and authorised order releases.
  • Accounting software: Posted financial entries and reconciliation references.

Configure, test and introduce the workflow.

  • Send sample invoices and your numbering. Staff see a list of tax details and the layout to match.
  • Confirm the face of the bill. A test invoice from a test order comes back for inspection. Share unpaid bills and customer balances. They load as a trial and show on the overdue list for accounts to check.
  • Sales and accounts staff practise on test orders. Short sheets for each role follow. The new series begins on the date you fix. The first overdue list is reviewed together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Invoice numbers are unique.
  • Totals reconcile with approved lines.
  • Partial payments leave accurate balances.
Blow moulding companies

How the business operates.

Hollow containers hide faults. Thin walls are the usual culprit. A bottle with a thin shoulder looks fine on the line and then splits in a filler’s warehouse, weeks after the shift that made it ended. The record that explains it, such as parison programme, resin lot or cooling time, is rarely near the pallet.

Container design register

Hold each bottle or drum with its volume, neck finish, target weight, mould and the allowed wall thickness range, so a setter knows the limits before the first shot.

Machine set-up sheets

Store parison programme, blow pressure, cooling time and cycle for each mould and machine pairing, and show which setting was used on every run.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Container quotations. Price a bottle, jerry can or drum from shot weight, cavities, cycle rate, and resin and masterbatch cost, then keep every revision beside the accepted price. Lost quotes stay searchable.
  • Container design register. Store volume, neck finish, target weight, allowed wall range, handle style, mould number and test requirements for each design, together with the customer’s drawing revision. Old revisions remain readable.
  • Machine set-up sheets. Keep parison programme, blow pressure, cooling time and cycle target for every mould and machine pairing, so a setter sees which settings a run really used. Good days become repeatable.
  • Resin, preform and masterbatch stock. Receive HDPE and PET granule lots, bought-in preforms and colour masterbatch, then draw them down against runs, with a low-colour warning raised before the hopper is loaded. Shortfalls show before start-up.

Operational bottlenecks to check

Weight and wall thickness drift unseen

Weight is checked on paper at the machine, once an hour at best. The sheet goes into a folder nobody opens until a customer complains about a thin shoulder. No record shows how bottle weight moved over the shift.

Flash regrind is blended blindly

Pinch-off trim goes into the grinder and then into the next hopper, and no run carries its blend ratio. A later complaint has nothing to hold on to.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Specification

    The filler sends volume, neck finish, target weight, handle style and drop-test requirements, which are saved as a container design linked to the customer and to the drawing revision. Nothing is retyped later.

  2. 2. Quotation and mould

    A quote is built from container weight, cavities per mould, cycles per hour, and resin and masterbatch cost, while a new mould gets design sign-off and a trial record. Revisions stay on file.

  3. 3. Planning

    The planner matches the mould to an extrusion blow or stretch blow machine, then checks that resin, preforms, masterbatch and carton stock cover the run before the setter arrives. Shortages show up early.

  4. 4. Production

    The setter loads the stored parison or reheat settings, operators log counts, weights and wall readings by cavity, and pinch-off trim goes to the granulator with its weight noted. Every shot is accounted for.

  5. 5. Testing

    Leak, drop and top-load tests are taken by cavity at set intervals, and a failed sample holds the run until a supervisor releases or scraps it. The hold is automatic.

  6. 6. Packing and delivery

    Containers are cartoned or bagged onto pallets in the layer pattern the filler asked for, and the delivery note and label name the run and the resin lot. Stacking follows the account.

Industry reports to connect with

  • Bottle weight trend by cavity and shift
  • Rejects by defect such as thin shoulder, pinhole or flash, by mould and resin lot
  • Regrind used against virgin resin by container
  • Leak and drop test results by customer and cavity

Questions before implementation.

When should blow moulding companies consider invoice management?

Use when bills need links to orders, delivery or completed work. A supply or milestone becomes billable.

What should we bring to the requirements discussion?

Bring anonymised examples of Customer details; Approved billing lines; Numbering and tax settings. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Create and track invoices against billed goods or work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Your accountant confirms tax treatment and invoice requirements.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Invoice numbers are unique. Use this check when reviewing the first working version.

Talk to us

Discuss invoice management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements