Skip to main content
GullySystem
Other industries

Business solutions for CCTV and security system installers

Explore software for work such as “CCTV for homes and independent houses”. Review each business function below, including when it fits and what to check before implementation.

CCTV and security system installers

How the business operates.

The installation is the simpler part, because renewal depends on the following year, when a camera goes blank or the recorder stops writing to its disk. Trust is won in year two.

Site survey to quotation

Capture camera positions, mounting heights, cable runs, lens choice and recording days at the survey, and price a bill of material from them. Every revision is kept.

Device register per site

Record every camera, recorder, hard disk and switch with its make, model, serial, the channel it sits on, the area it covers and its warranty date. Nothing lives in a technician’s head.

Installation job cards

Open a job per site with the team assigned, days worked, devices fitted, cable metres consumed and commissioning steps such as focus and time sync ticked off. Handover is a checklist.

AMC schedule and checklists

Plan visits per contract, with a due list of lens cleaning, focus checks, hard disk health and recording playback tests for each site. Slipped visits turn red.

Complaint calls

Each complaint call is logged against its site and handed to a technician, then closed with the fault found and the part replaced. Repeat faults show by site.

Material issue and van stock

Issue cable drums, connectors, BNC and RJ45 ends and mounts to a job, count back what returns, and hold each van’s running stock. The store count holds.

Warranty claims and AMC billing

Raise a warranty claim on the distributor against the serial on file, and invoice devices, material and labour with the advance adjusted. An export to your bookkeeping tool is priced separately.

Cable run and conduit sheet

The fitter notes cable length, conduit route and junction box for every camera point on the plan. The store issues cable drums against that sheet. Offcuts go back to stock.

Handover and customer training record

A handover note records the viewing logins given, who holds the recorder login and who attended the demonstration. The customer signs it on the last visit. Later disputes start from this page.

Hard disk replacement log

Recorder disks wear out. The log holds each disk’s fitting date, capacity and replacement, and the service desk sees which sites are due a swap. Footage gaps are noted against the recorder.

The records that hold the operation together.

  • Site surveys and camera positions. Record camera positions, cable runs, recorder and power points, mounting heights and site photographs, so the quotation is priced from what the technician actually saw on the wall.
  • Quotations and bill of material. Price cameras, recorder channels, hard disks, cable, connectors and labour from the survey, keep every revision, and mark the version the customer approved.
  • Installation job cards. Open a job for each site with the team assigned, the days worked, cameras fitted and cable consumed, and tick off the commissioning steps one by one.
  • Camera and recorder register. Hold the make, model, serial, channel and position of every camera, recorder and hard disk installed, with the maker’s warranty date beside it.
  • Material issue and van stock. Issue cable drums, connectors, power supplies, racks and mounts to a job, count what returns to the store, and hold each van’s running stock.
  • AMC contracts and visit schedules. Keep the contract period, the sites and devices covered, the visits promised, and a due list of lens cleaning, focus and hard disk checks.
  • Complaint calls and offline cameras. A call comes in about a dead camera, footage that is missing or a disk that has failed. It goes to a technician. At sign-off the technician logs the fault found, plus whichever camera, disk or cable was replaced, against that call.
  • Technician teams and site attendance. Plan which team goes to which site each day, and record who reached the premises and the hours spent there. Travel claimed is entered too.

Operational bottlenecks to check

Site details leave with the technician

Once a technician moves on, nobody else remembers where the cameras, recorder and cabling sit at those sites, so the next visit begins with a ladder and a guess. Knowledge walks out the door.

Serials are not on file when a device fails

The distributor wants the serial and purchase date for a replacement, but the bill is lost, so the claim lapses and a new unit is bought. Margin pays for the unit.

AMC visits depend on memory

Quarterly checks slip by a month or two, and the customer may learn that recording stopped weeks earlier, which puts the renewal in doubt. Memory is the scheduler.

Material issued to a site is not counted back

A cable drum and a box of connectors go out in the van, nothing says what the job consumed, and the store count drifts all year. Stock shrinks without a name on it.

Quotations are slow to build

Survey notes are on paper, and each quotation is rebuilt from scratch in Excel with prices copied from the last distributor list. Slow quotes lose the job.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and site survey

    A home, shop or office asks for a quote. A technician visits, marks camera positions and cable lengths, and notes where the recorder rack and the power point will sit.

  2. 2. Quotation

    Pricing follows the survey. Cameras, recorder channels, disk, cable, power supply and labour are costed from your rate sheet. Each revision stays on file. Nobody has to wonder which quote the customer signed.

  3. 3. Material issue

    Once the quote is approved, the store issues cameras, the recorder, cable drums, connectors and brackets against the job. A count sheet rides in the van to the site.

  4. 4. Installation and commissioning

    The crew pulls cable, mounts cameras, crimps connectors and terminates, then sets recording days and the phone view. Every serial is entered against its channel and position before anyone leaves.

  5. 5. Billing and handover

    A tax invoice covers devices, material and labour with the advance adjusted. The customer sees the recording days and the mobile app working, then signs off the handover.

  6. 6. AMC and service calls

    The site moves onto a visit schedule. A call about an offline camera or a failed disk is logged, assigned and closed against the same site record, with the part changed noted.

Roles and responsibility boundaries.

For owners

See installations in hand, AMC visits due, open complaint calls, material issued against each site and payments still outstanding, so a stalled job shows up before the customer phones.

For the office and coordinators

Build quotations from surveys, plan teams for the week, book complaint calls, and raise invoices and renewal notices from one desk.

For installation technicians

See the day’s sites, read the camera positions from the survey, check the material issued, and enter serials against each channel before leaving the premises.

For service and AMC technicians

A technician opens the day’s visit list, checks the camera and recorder entries held for that site, and logs the defect located and the part swapped before leaving.

For store and purchase staff

Issue material to jobs, receive stock with serials, raise distributor orders and follow warranty replacements back to the site. Returns are counted in at the store.

Reports your managers need.

  • Installations in hand by site and stage
  • Quotations raised, approved and lost
  • AMC visits due, done and overdue
  • Complaint calls by fault, site and technician
  • Cable, connectors and mounts issued against each job and returned
  • Devices installed by model with maker’s warranty dates
  • Advances received and balance outstanding by site

Connections to scope

  • WhatsApp
  • SMS
  • Email
  • Card and wallet payments
  • Accounting export
  • Barcode or label printer
  • GPS or biometric attendance for field teams

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Your camera models and rate list

Camera types, recorder channels, hard disk sizes, cable rates, accessory prices and labour charges go in the way you quote them today.

Survey and commissioning checklists

The points a technician marks on a survey, and the steps ticked at commissioning, follow the way your own crews work, from lens angle to cable labelling.

AMC terms and visit frequency

The visit allowance and scope follow your existing contracts with apartment associations and offices.

Sites and device history migrated

Site lists, contact numbers, installed serials, running AMC contracts and outstanding balances arrive from your registers or current software and are spot-checked before go-live.

Hosting and updates

GullySystem runs the hosting, so the office and the field read one set of site records while our staff change the rate list and visit schedules whenever asked.

Limitations to settle before implementation

  • A single technician taking one repair a week may find a notebook and a bank app enough.
  • A firm that supplies guards rather than fitting cameras will find Security Agency Management Software closer.
  • A contractor whose work is mainly wiring, panels and lighting will find Electrical Contractor Management Software a better fit.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • CCTV for homes and independent houses
  • CCTV for shops and showrooms
  • Apartment and gated community surveillance
  • Factory and warehouse surveillance
  • School and college CCTV
  • Access control and biometric attendance
  • Video door phones and smart locks
  • Intrusion and burglar alarms
  • Annual maintenance contracts
  • Upgrades from analogue to IP cameras
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements