Skip to main content
GullySystem
Manufacturing

Business solutions for Concrete block manufacturers

Explore software for work such as “Contractors and mason relationships in the delivery radius”. Review each business function below, including when it fits and what to check before implementation.

Concrete block manufacturers

How the business operates.

Blocks look identical on a pallet, yet they differ in cement ratio, wet density and the days spent under tarpaulin. A mason who finds hairline cracks in a parapet wants to know the batch. Few yards can say.

Mix design register

Hold each block type with its cement, sand, aggregate and water ratio, plus the batch weighed out for a shift, so a change of mix leaves a dated entry. Earlier mixes are never overwritten.

Press run log

Record every run by press, mould size, operator and pallet count, with rejects and cracked units noted before the green blocks leave the machine.

Curing yard tracking

Place each stack in a numbered bay with its press date and show the days cured, so the loader sees which stacks may go onto a truck and which must wait.

Strength test records

Attach compressive strength and dimension results to the sampled press run, with age at testing and the technician’s name. The figure is ready when a site engineer calls, and no ring binder is opened.

Delivery and breakage notes

Raise a delivery note per truck with counts by size, vehicle number and driver, and log breakage reported at the site gate against that exact load.

Contractor accounts and dues

Keep each builder’s loads, rates, payments and balance on one page, oldest delivery first, with payment reminders sent from the same screen.

Cement and aggregate receipts

Cement bags, river sand and chips arriving at the yard are weighed and logged by supplier and truck. Sand moisture is noted. The mix operator draws only from lots entered.

Mould and press maintenance

Moulds for hollow and solid blocks are listed with cycles run and the next service date. Vibro-press oil and wear parts are logged. The yard supervisor sees which mould is due before a size drifts.

Pallet and board returns

Wooden pallets and curing boards leave with each load and are expected back at the yard. Counts out and in are kept per contractor. Unreturned pallets are charged on the next bill.

Block rate list by size

Rates are held for each block size and grade with separate prices for delivered and ex-yard sales. Contractor rates are set apart. Sales staff quote from the current list.

The records that hold the operation together.

  • Block orders and rate cards. Enter hollow, solid and paver orders by size and site, with the per-piece rate agreed for each builder so the invoice repeats the quotation.
  • Mix design register. Hold cement, river sand, 6 mm aggregate, fly ash and water per block type, with a dated version each time the recipe or the water-cement ratio changes.
  • Raw material stock. Track cement bags, crusher dust, sand, fly ash and plasticiser from receipt to the mixer hopper, with a reorder level for each silo and bin.
  • Batching and press run log. Record each pan mixer charge and each press run by machine, mould, operator and pallet count, with rejects and broken units tallied at the press.
  • Curing yard map. Place each stack in a numbered bay with its press date and days cured, so the loader sees at once which pallets may leave and which still stand green.
  • Strength and dimension tests. Enter cube crushing load, water absorption and block dimensions against the sampled run, with age at testing and the tester, and flag lots outside your own limits.
  • Dispatch and delivery notes. Raise a delivery note for each truck with counts by size, vehicle number and driver, and log chipped or cracked units reported when the load is unstacked.
  • Pallet and mould assets. Count wooden or steel pallets out with customers and back in, and log mould liner wear, tamper head changes and repairs against each mould.

Operational bottlenecks to check

Mix changes are not written down

Cement content drifts with the price per bag and the moisture in the sand, and the press operator adjusts by eye. Weeks later, nobody can match a failed batch to the mix that produced it.

Curing days are guessed

Blocks sit in the yard for an unknown number of days before loading. A customer in a hurry takes green units, and cracks show up on the gable wall. The yard hears about it last.

Pallet counts disagree with the delivery

The press count, the stack count and the truck count each differ by a few dozen. Breakage, rejects and short loads blur together, so claims are settled across the weighbridge by argument.

Test results sit on loose sheets

Crushing results for a block or cube sit on a lab sheet filed by month. A site engineer who asks for one lot’s figure waits while somebody rummages through a cupboard.

Contractor accounts run on rough counts

Regular builders take blocks in small loads over weeks, and the yard keeps a ruled notebook of counts and rates. The balance is rebuilt from scratch each time a cheque turns up.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Order

    A builder, dealer or housing site orders 200 mm hollow, solid or interlocking paver units by size for a delivery date. Rate and carriage sit on the order.

  2. 2. Mix and material issue

    The supervisor picks the mix version for the block type, then cement, crusher dust and fly ash are issued to the pan mixer against it and deducted from stock. Each charge is weighed once.

  3. 3. Pressing

    The operator records each run by press, mould and pallet count, with rejects and the cause of any stoppage, such as a hydraulic hose or a mould change. Green blocks go to a curing bay. Bay and press date are noted.

  4. 4. Curing and testing

    The system counts the days each stack has cured. A sample is drawn at the age you set, crushed on the compression machine or measured for size, and the result is attached to that run.

  5. 5. Dispatch

    Loaders lift only cured stacks. A delivery note records the count by size, the vehicle and the driver, and yard stock falls by the same figure.

  6. 6. Billing and collection

    Delivered counts become an invoice at the agreed rate per piece, and breakage claims are netted off on the same builder account. Payments post as they arrive.

Roles and responsibility boundaries.

For owners

Read pallets per press, cement used per thousand blocks, stacks standing in the curing bays and builder dues without phoning the yard office, whatever the shift.

For press operators

Key in pallets pressed, rejects and the mould, then add the reason for any stoppage, whether a hydraulic fault or a liner change, before the shift ends. Nothing more is asked.

For yard supervisors

Pick the mix, assign bays, release cured stacks. When a stack reaches the age your standard asks for, request a cube sample and read the result against the lot.

For dispatch and drivers

Load against the delivery note and record the count by size, then log any chipped corners or cracked units that the site reports once the pallets are unstacked.

For accounts

Raise invoices from delivered counts and post payments. Chase builders whose oldest load has aged beyond your terms, starting with the largest balance, and send the reminder over WhatsApp from the same account page.

Reports your managers need.

  • Pallets pressed by machine, mould and shift, with rejects
  • Cement and fly ash consumed against blocks pressed
  • Stacks standing in each bay by days cured
  • Cube crushing and dimension results by lot
  • Deliveries by builder and size, with breakage reported
  • Builder dues, oldest delivery first
  • Pallet and mould movement, liner wear and repairs

Connections to scope

  • WhatsApp
  • SMS
  • Email
  • Weighbridge entry
  • Accounting export
  • Payment gateway

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Block types and moulds

Hollow and solid sizes, moulds, paver patterns and per-piece rates go in as your yard quotes them to builders, so the first order already reads in your own terms.

Mix and curing rules

Mix ratios, water-cement limits and the minimum curing period are keyed in from the values your lab lead signs off, and later changes arrive as a new dated version.

Test fields

Compression, water absorption and size fields follow the buyer specifications you work to, and any extra column a site engineer asks for is added during set-up.

Accounts brought across

Your notebook or spreadsheet supplies each builder, the open balance and the rate last agreed. We then compare a few accounts line against line with the old figures before the first delivery note is raised.

Currency and tax

Invoice currency and tax lines follow the rules of your country, reviewed during implementation with whoever signs off your accounts, so nothing is assumed from another market.

Hosted by GullySystem

The press, the yard and the office open the same records because GullySystem keeps the system hosted for you, and its staff make the changes you ask for.

Limitations to settle before implementation

  • A roadside yard with one hand-operated machine and a handful of regular buyers can keep a notebook of counts and sales without any software at all.
  • Plants that mainly cast beams, columns and large slabs in steel moulds, with lifting inserts and stressing beds, will find Precast Concrete Manufacturer Management Software closer.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Contractors and mason relationships in the delivery radius
  • Builder and developer project supply
  • Block specification and strength sheet for architects
  • Delivery scheduling and confirmation
  • Enquiry capture from calls and WhatsApp
  • Government and institutional supply
  • Sample blocks and yard visits for serious buyers
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements