Skip to main content
GullySystem
Automotive

Batch and Serial Tracking for Electric vehicle service centres

Preserve the physical identity and custody of EV components actually received, removed or replaced.

Manufacturing

Does this function belong in your operation?

For centres handling identified replacement or removed units. Diagnostic-only visits and unmarked components do not justify invented serial records.

An identifiable physical unit is received or changes custody during an accepted vehicle job.

Where the centre receives or replaces an identified component, retain its physical identity throughout the job. Installed, removed and replacement units are separate records, with ownership and location recorded at handoff. A unit sent for manufacturer assessment is not automatically accepted for credit or ready for reuse when returned. This scope follows actual identifiers; it does not invent serials for unmarked components or establish battery condition, authenticity or warranty cover.

Bring the records the workflow depends on.

  • Actual manufacturer or supplier identifier and component type
  • Vehicle-job reference, ownership and source or destination
  • Authorised condition, restriction and outside-handoff references

Outputs to check

  • Identified-unit custody and vehicle-job history
  • Installed and removed component references kept separately
  • Missing-identity, unacknowledged-handoff and disposition actions

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify the physical unit

    Capture the available physical identifier and source evidence. A local tracking reference must remain distinguishable from a manufacturer serial.

  2. 2. Record receipt and ownership

    Link the unit to its supplier or customer and actual custody location. Record missing or conflicting identity for review rather than fabricating a serial.

  3. 3. Retain installation and removal history

    Preserve the previous and replacement units as distinct records linked to the vehicle job. Identification does not itself authorise removal, fitment or restricted work.

  4. 4. Record outside assessment and return

    Keep dispatch, receiving acknowledgement and the authorised returned-unit decision. A returned unit is not automatically usable stock or an accepted warranty credit.

  5. 5. Trace a later concern

    Follow the recorded source, job and custody events to the responsible reviewer. Retain correction history when source evidence changes.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Component custodian

Captures identity and actual handoffs while keeping ownership clear.

Technical owner

Provides condition and disposition decisions within the applicable authority.

Manufacturer liaison

Tracks external receipt and claim responses without inferring approval.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Identifier cannot be read

Keep the unit linked to a controlled custody reference and the unresolved identification decision; do not invent a manufacturer serial.

Replacement overwrites the removed unit

Preserve separate records and the actual change event so the earlier component can still be traced.

Supplier returns a different unit

Check the return identity and supporting decision before reconciling the original dispatch.

Returned unit has no disposition decision

Keep its status pending the authorised review; receipt alone does not make it available for reuse.

Can this work independently?

Traceability requires real identifiers or clearly labelled local custody references and timely movement records. The job supplies vehicle context; technical owners determine condition and restricted handling. Manufacturer responses, claim settlement and disposal are separate processes, not consequences of a serial lookup.

Systems and records it connects with

  • Vehicle job and component-change evidence.
  • Supplier or specialist dispatch and receipt acknowledgements.
  • Customer billing and separate manufacturer claim reference.

Configure, test and introduce the workflow.

  • Compare physical identifiers with receipt and job records for actual handled units.
  • Test unreadable identity, a changed replacement and an outside return.
  • Trace a later concern without overwriting the original unit or assuming claim acceptance.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Each actual unit retains its own identity through replacement.
  • Customer-owned units remain distinguishable from the centre’s stock.
  • External dispatch and acknowledged receipt are separate events.
Electric vehicle service centres

How the business operates.

An EV arrives with a charging complaint, but reception cannot decide whether the issue belongs to the vehicle, an accessory or another service provider. EV workshop software needs to preserve the reported concern, the qualified assessment and the centre’s actual scope before promising work. This profile covers fixed-site electric-vehicle service centres within their declared model and task capabilities. It separates routine work from restricted specialist tasks and tracks physical component identity where units are received or replaced. The proposed records support professional decisions; they do not make them.

Vehicle intake and capability review

Capture the model, vehicle identity, reported behaviour and relevant accessories or modifications declared by the customer. Check the centre’s actual capability and permitted diagnostic access. A booking is not acceptance of battery-pack repair or home-charger installation.

Diagnostic and technical supervision

Qualified staff determine the assessment route and required work permissions. Record findings, unavailable access and the next responsible person. A stored isolation or readiness reference reports a professional decision; changing a workflow field cannot make a vehicle safe to work on.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Vehicle and model identity, customer concern and declared accessory history
  • Centre capability check and diagnostic access reference
  • Assessment findings with source, date and qualified decision owner
  • Customer estimate acceptance distinct from technical work authority

Operational bottlenecks to check

A charging complaint is assigned to the wrong scope

An owner describes failure at a particular charger. Capture that context and the qualified finding without assuming the workshop must replace the vehicle battery or install building equipment.

The trained person is unavailable

A course entry remains on file but the authorised specialist is absent. Keep task permissions and actual allocation visible instead of treating another technician’s experience as equivalent.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Check the service boundary

    Identify the vehicle and requested help before accepting an investigation. Record work outside the centre’s capability and the proposed referral.

  2. 2. Arrange qualified assessment

    Assign the appropriately authorised person and record required external access. Missing diagnostic access is a dependency, not a reason to invent a diagnosis.

  3. 3. Separate technical and commercial decisions

    Retain the qualified work decision and customer acceptance of the relevant charge. A warranty request is another decision and must not silently replace either.

  4. 4. Track work and component movement

    Preserve actual work and identifiable unit changes. Refer newly discovered scope and any interrupted job to the authorised reviewer before continuing the applicable work.

  5. 5. Review release and unresolved questions

    Record the responsible technical conclusion and the handback decision. A diagnostic report, course certificate or cleared bill is not independent proof of vehicle readiness.

  6. 6. Reconcile customer and external records

    Bill accepted work and retain separate manufacturer or specialist outcomes. Keep the earlier complaint and component history available when the concern returns.

Industry reports to connect with

  • Jobs awaiting qualified assessment, access or customer consent
  • Restricted tasks awaiting the responsible authorisation decision
  • Identifiable components with incomplete outside handoffs
  • Customer-paid and manufacturer-pending work by job

Questions before implementation.

When should electric vehicle service centres consider batch and serial tracking?

For centres handling identified replacement or removed units. Diagnostic-only visits and unmarked components do not justify invented serial records. An identifiable physical unit is received or changes custody during an accepted vehicle job.

What should we bring to the requirements discussion?

Bring anonymised examples of Actual manufacturer or supplier identifier and component type; Vehicle-job reference, ownership and source or destination; Authorised condition, restriction and outside-handoff references. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Preserve the physical identity and custody of EV components actually received, removed or replaced. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The record does not certify component authenticity, health, compatibility, warranty or permission to handle, repair or reuse a battery unit.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Each actual unit retains its own identity through replacement. Use this check when reviewing the first working version.

Related functions for electric vehicle service centres.

    Talk to us

    Discuss batch and serial tracking for your business.

    Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

    What happens after you share your requirements

    1. We review your brief and the systems you already use.
    2. We clarify the workflow, missing information and the work to consider first.
    3. The proposed scope sets out the deliverables, responsibilities and dependencies.
    4. Review the scope and commercial terms before deciding whether to proceed.

    Start with your requirements

    Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

    Share your requirements