Skip to main content
GullySystem
Other industries

Business solutions for Fire safety companies

Explore software for work such as “Fire hydrant and sprinkler system installation”. Review each business function below, including when it fits and what to check before implementation.

Fire safety companies

How the business operates.

After installation, your work is recurring and date-driven. A passed refill date or a skipped pump test is a risk for the client and a lost renewal for you.

Site and equipment register

Record every extinguisher, hose reel, detector, alarm sounder, panel and pump with type, capacity, position and serial number, under the site and floor it serves.

Refill and hydro test calendar

List due dates cylinder by cylinder, grouped by client and month, with the pickup, the replacement left at site and the return all tracked.

Job sheets on the phone

Complete pump, panel and detector checks with readings, faults, photographs and the client signature at site.

Visit reports for the client

Turn the signed job sheet into a visit report and send it to the client contact by mail or WhatsApp.

Installation projects

Run a hydrant, sprinkler or alarm installation in stages, with material issued from the warehouse, labour recorded and handover documents kept with the site.

AMC contracts and renewals

Track visits promised, visits done and the end date, with an early reminder, so a renewal quote is ready before the contract runs out.

Cylinder yard register

Every extinguisher cylinder in the refilling yard is logged by serial, type and test date. Staff see which ones are in refill, hydro test or ready. Tags are printed from the record.

Mock drill and training log

Evacuation drills and extinguisher training sessions are recorded by site, date and attendees. Clients ask for the record at inspection. Certificates issue from the same entry for each attendee.

Panel fault and false alarm log

Alarm panels record faults, silenced zones and false alarm events with their cause. Engineers see repeat faults at the same detector. The client receives the finding on the visit sheet.

Defect and quotation follow-up

Defects found on a visit, such as a missing hose reel or a blocked sprinkler head, are listed with the client’s reply. Estimators follow each into a quotation. Open defects stay visible until closed.

The records that hold the operation together.

  • Site and building records. Hold each client site with its floors, blocks, gates, contact persons and the equipment installed in every location, so a technician arrives knowing which stairwell to start from.
  • Extinguisher and equipment register. List every extinguisher, hydrant, sprinkler zone, sounder, strobe, callpoint and addressable panel by serial, type, capacity, position and date of installation. Each item shows its last refill and its next test date.
  • Refilling and hydro test jobs. Track cylinders picked up, refilled, pressure tested and returned, with the replacement left at site while each one is away. The workshop sees every cylinder still waiting for a test slot.
  • Installation projects. Run hydrant, wet riser, deluge, sprinkler and alarm installations as projects with stages, material issue, labour, site photographs and handover. Pipe and sprinkler head counts are reconciled when the project closes.
  • Inspection and service schedules. Build monthly, quarterly and yearly visit lists from the due dates on each site’s equipment and each contract. The coordinator sees overdue sites first and assigns a technician from the same screen.
  • AMC contracts and renewals. Keep contract period, visits promised, equipment covered, rates and instalments, with a renewal list that reads from the end date. Each line shows visits used against visits still owed to the client.
  • Technician job sheets. Give each technician the day’s visits, readings to record and faults to log. The client signs at the end, and the signed sheet becomes the visit report sent to the client contact.
  • Spares, cylinders and stock. Count refill powder, cylinders, fusible bulbs, sprinkler heads, pipes, detectors and valves in the store and in each technician’s van. A low count on powder or valves is flagged before a refill batch stalls.

Operational bottlenecks to check

What is due this month is unclear

Refill and hydro test dates are spread across a register per client, and some are missed until the client calls. Nobody reads them as one list.

Service reports take days to type

Technicians fill paper checklists at site, and the office retypes them into Word one client at a time. It is done after hours.

Cylinders are mixed up at the refill centre

Extinguishers from three sites arrive together, and one returns to the wrong building. The mistake is found at inspection.

Van stock is never counted

Refill powder, sprinkler heads and detectors leave the warehouse with a technician and come back uncounted. The shortage shows at stock-taking.

AMC renewals depend on memory

A contract lapses quietly, and a competitor offers a lower price. The client never gets a call.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and survey

    A building manager or contractor asks for extinguishers, a hydrant line or an alarm system. A surveyor walks each compartment and lists what the site already holds and what it still needs to meet the client’s brief.

  2. 2. Quotation

    A quotation is raised for supply, installation, refilling or an annual contract, with equipment, labour and visit counts itemised. The version sent to the client is kept beside every revision.

  3. 3. Work order

    On approval the job opens as an installation project, a refill batch or a service visit. Technicians, dates and the material to be issued from the store are assigned to it at once.

  4. 4. Work on site

    The technician records readings, serials, faults and photographs on the job sheet, and the client’s representative signs it. The equipment register is updated to match. Nobody retypes it at the office.

  5. 5. Billing

    A tax invoice follows the completed job or the contract instalment, and it is paid by transfer, card or cheque. Corporate clients with several sites keep one running account across all of them.

  6. 6. Next due date

    Every piece of equipment and every contract carries its next date. Refill, test and inspection lists build themselves from those dates, and reminders reach the client before the visit falls due at the site.

Roles and responsibility boundaries.

For owners

Read work booked and completed, contracts due for renewal, cylinders out for refilling, stock held and money outstanding by client. Nobody waits for the coordinator to compile a weekly sheet.

For the service coordinator

Build the visit list and assign technicians. Chase faults left open, and tell a client when the next inspection falls due, with the site and equipment already in front of you.

For technicians

See the sites allotted today, record readings and serials, log faults and take the client’s signature on the job sheet. The register is updated before the van leaves the car park of the site.

For the workshop and store

Receive cylinders for refilling and return them to the right site. Issue spares against projects and visits, so the store count matches what the van carried out through the gate each morning.

For accounts staff

Raise invoices against completed work and contract instalments, record receipts and follow the balance on each corporate account. A disputed line opens straight onto the job sheet behind it.

Reports your managers need.

  • Equipment due for refilling and pressure testing
  • Visits completed and visits pending by technician
  • AMC contracts by end date and renewal status
  • Faults logged, closed and still open by site
  • Cylinders out of site and the replacements left behind
  • Material issued and returned against each installation
  • Invoices raised and balance due by client

Connections to scope

  • WhatsApp
  • SMS
  • Email
  • Card and payment link collection
  • Accounting file export
  • QR or barcode labels for equipment
  • Technician phone location on visits

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Your equipment types and service list

Extinguisher types and capacities, hydrant and sprinkler parts, deluge valves, gaseous suppression cylinders, alarm devices, refilling charges and visit rates go in exactly as you quote them today.

Visit intervals you work to

Refill, test and inspection intervals follow what you and each client have agreed. What a local authority or insurer asks of the client is for the client and their advisers to decide.

Job sheet layout

The readings, checks, photographs and signatures on a visit sheet match the format your technicians already fill at site. Nobody learns a new form on the first morning of go-live.

Registers and contracts migrated

Site lists, equipment registers with serials and dates, and live AMC contracts arrive from your files or current software. The coordinator checks a sample of sites before go-live. Errors are fixed first.

Messages and payments

Due date reminders and visit reports go to clients over WhatsApp, SMS or email, and payments can be taken by card or a payment link sent with the invoice.

Hosting across branches

GullySystem runs the hosting, so each branch works on the same site list and equipment register. Our staff revise rates and visit schedules when you ask, and the branches keep working.

Limitations to settle before implementation

  • A one-man refilling unit with a handful of local customers may manage with a register and a phone.
  • A company that only trades in equipment without servicing it will find a trading or wholesale product closer.
  • Fire safety training and mock drill providers with no equipment to service need something simpler.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Fire hydrant and sprinkler system installation
  • Fire alarm and addressable detection systems
  • Fire NOC drawings and liaison support
  • Fire audits for NOC renewal and insurance
  • Extinguisher supply, refilling and hydro testing
  • Annual maintenance contracts
  • Kitchen and gas-based suppression systems
  • Fire safety training and evacuation drills
  • Fire doors and passive fire protection
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements