Skip to main content
GullySystem
Manufacturing

Business solutions for Food processing machinery manufacturers

Explore software for work such as “Flour, spice and dal mills”. Review each business function below, including when it fits and what to check before implementation.

Food processing machinery manufacturers

How the business operates.

A food machine is judged on its welds, its finish and the parts that touch the product. Those details are decided in the fabrication bay long before a buyer sees a hopper or a conveyor belt. Crevices matter.

Hygienic machine quotations

Price a machine by throughput and the product it handles, adding heating jackets, guards, PLC controls and washdown frame as options at the rates your estimator holds. Every revision is kept.

Stainless material and heat records

Record sheet, tube and tri-clamp fitting lots received, with grade and heat number, then issue them to a machine and its parts.

Weld, finish and passivation checks

Log weld inspections, Ra surface readings and pickling steps against each vessel. The fields come from your quality staff at set-up.

Build stages and bought-in parts

Follow a machine from plasma cutting through rolling, welding, polishing and assembly, with gearmotors, variable-speed drives and panels linked to the same serial.

Factory acceptance tests

Hold the test plan, product or water used, readings taken and the customer’s sign-off on one record.

Commissioning and spares

Schedule site start-up, keep the as-built parts list, and quote seal kits from the machine that is actually installed.

Drawings and design revisions

Machine drawings, weld maps and bills are kept per model with a revision number. The design engineer releases a change to the shop floor. Fabricators work only from the current drawing.

Warranty and breakdown calls

Every installed mixer, fryer or filler carries its warranty end date and service history. The service engineer sees past faults.

Operator training and manuals

Operation manuals, cleaning instructions and training dates are recorded per installed machine. The commissioning engineer notes which operators were trained. Customers can request a refresher visit from the service team.

Subcontract fabrication and polishing

Cut sheets, rolled shells and polished frames sent to outside shops are logged with issue and return dates. The works manager sees what is held outside. Rework from a poor finish is recorded.

The records that hold the operation together.

  • Enquiries and machine sizing. Log each enquiry with product, throughput and room limits, and keep the sketches and site photographs the buyer sent.
  • Quotations and option lists. Price machines from your own base rates and option tables for jackets, guards, outlet valves and panel enclosures, and keep every revision.
  • Drawing and parts list control for food machinery. Release a layout drawing and a parts list under a revision letter, so the bay builds what the order named and not an older print.
  • Stainless sheet and heat tracking. Receive sheet, tube and tri-clamp fittings by grade and heat number, and issue them to the machine they were cut for.
  • Fabrication stages. Move a machine through cutting, rolling, welding, polishing and assembly, with the bay lead signing each stage.
  • Weld and surface checks. Record dye penetrant results, surface roughness readings and passivation steps for each vessel against its serial.
  • Bought-in drives and panels. Order geared motors, pumps, load cells and PLC panels against a machine, and receive them into that build.
  • Factory acceptance test. Keep the test plan, the water or trial product used, the readings and the buyer’s sign-off on the machine.

Operational bottlenecks to check

Sheet certificates are separated from the machine

The stainless grade and heat number arrive on an EN 10204 mill certificate that is filed by purchase order, in a cabinet the fabrication bay never opens during a build. Nobody links it to the tank. The trail ends there.

Weld and finish checks live on paper

The welder’s visual check, the pickling and passivation step and the Ra roughness reading all go onto a bench sheet. The sheet is lost. The buyer’s auditor asks anyway.

Options multiply between quote and build

A customer adds a heating jacket, a second discharge valve or a clean-in-place spray ball by phone. The fabrication drawing is not updated, and the machine ships without it. Nobody notices until site.

Acceptance tests are scattered

The trial run, the dough or sauce used and the buyer’s sign-off are buried in emails passing among the test engineer, sales and the plant manager. A repeat order starts blind.

Spares requests lack a machine history

A plant orders a shaft seal for a mixer built long ago. The sales desk cannot say which gearmotor, seal type or agitator shaft diameter went into it.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and sizing

    Product, throughput and room limits are noted as the enquiry arrives, beside the buyer’s floor sketch. One sales engineer owns it until a quotation leaves. Nothing sits unowned.

  2. 2. Quotation with options

    Machine type, chosen jacket or guard options and the control panel make up the quotation, and each change the buyer asks for is saved as a numbered revision.

  3. 3. Order and drawing release

    A confirmed order opens the machine record. Layout drawing, parts list and revision letter reach the bay together, so nobody cuts from an older sheet. The old print is retired.

  4. 4. Fabrication and assembly

    Plate is issued by heat number to the machine it was cut for. Vessels are rolled, welded and polished, then drives and panels are fitted, and the lead signs off every stage. No stage is skipped.

  5. 5. Factory acceptance test

    The test plan runs on water or a trial product such as flour or oil. Readings, remarks and the buyer’s signature are kept together and sit against the serial.

  6. 6. Commissioning and spares

    Crating, dispatch and the site start-up visit are recorded. Later seal kit orders and breakdown calls open straight from the installed machine.

Roles and responsibility boundaries.

For sales engineers

Size the machine, build the quotation from option tables and follow open quotations by buyer.

For design and drawing office

Release layout drawings and parts lists with revision letters, and see which orders still wait for design.

For fabrication and assembly leads

See machines in each bay, plate issued to them and stages awaiting a sign-off.

For quality engineers

Log weld, finish and acceptance results against the serial, and answer a buyer’s audit question from a single screen.

For after-sales and spares staff

Open the installed machine, quote the correct seal or belt and book the start-up or repair visit.

Reports your managers need.

  • Machines now in each bay, by stage
  • Sheet and tube drawn for each machine, by heat number
  • Open, won and lost quotations, split by product handled
  • Acceptance tests booked, passed or waiting for sign-off
  • Bought-in drives and panels still to arrive
  • Spares quoted and supplied, split by machine age
  • Commissioning visits scheduled by site

Connections to scope

  • Email
  • WhatsApp
  • Accounting export
  • Drawing file links
  • Payment gateway

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Option lists and rates

Base machines, options and labour rates are loaded the way your estimator prices them today, down to the jacket and hopper choices.

Test and inspection formats

Weld, surface and acceptance sheets follow the layouts your buyers expect, drawn up with your quality engineer.

Material and grade codes

Stainless grades such as 304 and 316, sheet sizes and fittings are entered with the heat number fields you use.

Records migrated

Past machines with their serials, parts lists and spares history come across, along with orders still open.

Messages and documents

Quotations, test reports and dispatch notes go out by email, and quick status messages through WhatsApp or similar.

Hosted by GullySystem

GullySystem hosts the system, so design, bay and service staff read the same machine record.

Limitations to settle before implementation

  • A fabricator who makes stainless tables and racks, not machines, should look at Manufacturing Production Management Software.
  • A workshop that only repairs food machines may prefer Industrial Repair Management Software.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Flour, spice and dal mills
  • Oil expellers
  • Frying and snack lines
  • Bakery ovens, mixers and moulders
  • Fruit and vegetable processing
  • Millet and cereal processing
  • Complete line layout for new units
  • Stainless steel food-contact build
  • Training, spares and service
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements