Skip to main content
GullySystem
Manufacturing

Price Lists and Schemes for Furniture manufacturers

Apply dated price lists and promotional rules to eligible transactions.

Sales and Distribution

Does this function belong in your operation?

Use when prices vary by customer group, channel, quantity or promotion.

A price or commercial offer changes.

Rates for dealers, interior designers and walk-in buyers sit in separate lists. Festival schemes on mattresses or dining sets start and end on set dates. A quote picks up the right rate itself.

Bring the records the workflow depends on.

  • Item prices
  • Customer eligibility
  • Validity and combination rules

Outputs to check

  • Effective-dated pricing register
  • Offer eligibility and application record
  • Discount-exception report

Follow the price lists and schemes workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Create the price basis

    Record items, buyer groups and effective dates.

  2. 2. Define offer rules

    Set eligibility, limits and whether offers combine.

  3. 3. Approve publication

    Review exceptions and release the authorised version.

  4. 4. Apply to transactions

    Select the correct terms during quoting or billing.

  5. 5. Review overrides

    Retain manual discounts and preserve historical transaction prices.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Billing clerk

Checks the selected customer terms and raises any requested override through the discount approval rule.

Sales executive

Quotes from the list the customer is on, and knows what the running scheme allows a promise of.

Owner

Sets the lists, approves what goes below them, and sees the discount given this month against last.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Two offers overlap

Apply the defined precedence or require review instead of stacking them by accident.

Customer group changes

Use the agreed transaction date and preserve earlier billed prices.

Manual discount requested

Route the exception under the approval limit and record the final authorised rate.

Can this work independently?

Pricing can be maintained independently, but quoting or billing must use the approved selection rules for consistent application. Customer groups and item codes provide eligibility. The price module does not establish stock availability, contractual acceptance or whether a promotion is legally permitted.

Systems and records it connects with

  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Credit control: Customer limits, current exposure and authorised order releases.
  • Dealer portal: Partner identities, submitted orders and permitted account information.

Configure, test and introduce the workflow.

  • Hand over price sheets, scheme letters and the discount habits of the counter. A note groups them into lists.
  • Decide who sits on which list and how far each role may go. Bills that pick the right rate come back. Try them. Staff raise sample bills from several lists. Corrections return as an adjusted set of lists.
  • Billing clerks and sales staff practise approvals. A reference sheet for the counter follows. The next offer is entered with its dates. A review after it ends checks what each party paid.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Expired offers stop applying.
  • Eligibility rules select the intended buyers.
  • Old transactions retain their original rates.
Furniture manufacturers

How the business operates.

You make sofas, divans, wardrobes, dining sets and office workstations. Some are catalogue models for dealers. The rest are built to order, with the buyer’s carcass width, upholstery swatch and veneer shade pencilled on a drawing.

Showroom orders to factory work orders

Convert a showroom order into a factory work order that carries the sketch, carcass sizes, fabric code and veneer shade. The two products are joined at set-up, so nothing gets retyped on the way to the shop.

Material list and cutting list

Draw up the list of materials per order for pre-lam board, MDF, laminate, edge tape and fittings. The cutting list then reaches the beam saw on a job card, one sheet for each order and one line for each panel.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer order and approved sketch or drawing
  • Material list, cutting list and board or hardware issue
  • Stage job card and outside-processing dispatch
  • Finish, shade, fitting and packing check

Operational bottlenecks to check

Orders reach the factory late

The showroom’s order book and the factory’s cutting register are separate notebooks, and the gap between them belongs to nobody. Saw operators cut whichever sketch reached the shop first, not the one promised to a customer for Friday.

Material is short when cutting starts

No bill of materials was drawn up, so laminate, edge tape or hinge sets run out halfway through a wardrobe and the job halts. The beam saw idles while a dealer is phoned.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Approve the order specification

    Record dimensions, materials, finish and installation scope before releasing the order to the factory.

  2. 2. Plan materials and cutting

    Prepare the material and cutting lists, check boards and fittings, and record any approved substitution or shortage.

  3. 3. Build and track outside work

    Record shop-stage progress and reconcile parts sent for finishing or upholstery with the items returned.

  4. 4. Inspect and prepare delivery

    Check the finished pieces against the released specification and record rework, packing and delivery readiness.

  5. 5. Install and settle

    Record delivery, installation observations and customer acceptance. Reconcile approved changes and the remaining payment against the order.

Industry reports to connect with

  • Order progress from cutting to installation
  • Board and hardware shortages
  • Outside-processing items awaiting return
  • Rework, installation observations and customer balances

Questions before implementation.

When should furniture manufacturers consider price lists and schemes?

Use when prices vary by customer group, channel, quantity or promotion. A price or commercial offer changes.

What should we bring to the requirements discussion?

Bring anonymised examples of Item prices; Customer eligibility; Validity and combination rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Apply dated price lists and promotional rules to eligible transactions. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Commercial policy and permitted promotional terms must be approved by your business.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Expired offers stop applying. Use this check when reviewing the first working version.

Talk to us

Discuss price lists and schemes for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements