Job Cards for Heavy equipment and forklift dealers
Keep the inspection, work, parts and status of a service job together.
Does this function belong in your operation?
Use when service or repair work needs a record beyond an appointment.
A repair or field-service request is accepted.
A breakdown at a quarry becomes a card with the hour meter reading, the fault, the oil sample and the track chain links replaced. Parts issued from the service truck post to it. Billing reads the finished card.
Bring the records the workflow depends on.
- Customer and asset details
- Reported issue
- Work and parts approval rules
Outputs to check
- Service job and inspection record
- Approved parts and labour statement
- Completion and billing handoff
Follow the job cards workflow.
Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.
Who uses the module, and who approves?
Keep responsibilities distinct even when one person holds more than one role.
Decide how exceptions are handled.
These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.
Can this work independently?
Job cards can run with entered customer and asset records. Scheduling assigns staff, stock controls parts, and invoicing creates the bill from approved work. Closing a technical job should be distinguishable from financial settlement or customer acceptance where those occur later.
Systems and records it connects with
- Estimates and quotations: Approved estimate lines, revisions and acceptance references.
- Invoice management: Issued invoice references, line amounts and outstanding balances.
- Spare-parts stock: Item-location quantities and authorised stock movements.
- Technician scheduling: Assigned field jobs and technician availability.
Configure, test and introduce the workflow.
- We trace a vehicle from gate to delivery. You show us today’s slips, and we return the card layout we propose.
- Stages and who may change them are agreed. A chart on a page is yours to approve. The parts list and labour rates are loaded. Storekeepers test issuing against dummy cards.
- Cards run alongside paper for a stretch. Differences are discussed with advisors and technicians. Cards become the only record. The workshop team gets a short practice on phones.
Check the result before rollout.
Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.
- Parts usage links to the job.
- Unapproved additional work remains flagged.
- Completion retains the service record.
How the business operates.
A heavy equipment dealer sells new machines from one or more manufacturers, buys and sells used ones, rents out a fleet, services machines in the field and sells parts. Each machine is worth a great deal. Each has a long history of hours, repairs and owners.
The records that hold the operation together.
- Unit register and history. Hold each machine with serial number, model, hour meter, boom and stick options, owner and the full record of sales, rental and service.
- Enquiries and quotations. Log enquiries by machine class and site, and send quotations with buckets, rippers, breakers, delivery and warranty terms. Revisions are kept.
- Trade-ins and used stock. Record appraisals with photographs and a residual value, then follow each used machine through reconditioning, new sprockets and idlers, and repaint to sale.
- Rental fleet and bookings. Book machines against dates, record lowbed legs to and from site, and note hour meter readings, damage and fuel level at each return.
Operational bottlenecks to check
The unit’s history is scattered
Sales, rental and service each hold part of a machine’s life, and a buyer of a used unit who asks for its hours, repairs and previous owners waits days for the answer. Trust drops.
Trade-ins are valued from memory
A machine is inspected on the customer’s site and a figure agreed. Undercarriage readings, inspection notes and photographs are not kept with the unit, so resale pricing starts from nothing. Every trade-in is a fresh guess.
How work flows across this business
This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.
1. Enquiry
A buyer or hirer describes the work, the site and the machine class. The enquiry is logged and assigned to a salesperson or rental coordinator.
2. Quotation and trade-in
A quotation lists the machine, bucket, ripper, counterweight options, warranty and delivery. A trade-in is appraised, photographed and valued on the same record.
3. Delivery or rental start
A sold unit is invoiced and linked to its owner. A rental starts a contract with its period, rate, lowbed transport and opening hour meter reading.
4. Field service and parts
Planned services and breakdowns become jobs. Technicians record hours, findings, fault codes, greasing and parts drawn from the counter or the service truck.
5. Billing and collection
Machine sales, rental periods, service work and counter parts are invoiced. Receipts are posted and dues are listed oldest first.
6. Claims and resale
Warranty claims and remanufactured component exchanges go to the manufacturer. A returned or traded unit moves to used stock with its history intact.
Industry reports to connect with
- Quotations open, won and lost by machine class
- Units on rent, utilisation and returns due by date
- Used stock by age, residual value and reconditioning cost
- Field jobs by status and technician
Questions before implementation.
When should heavy equipment and forklift dealers consider job cards?
Use when service or repair work needs a record beyond an appointment. A repair or field-service request is accepted.
What should we bring to the requirements discussion?
Bring anonymised examples of Customer and asset details; Reported issue; Work and parts approval rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.
Does this replace our existing business software?
The starting point is your current system and the gap you need to close. Keep the inspection, work, parts and status of a service job together. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.
What is outside this module?
A job card records work and does not itself certify repair quality or equipment safety.
How are scope, price and rollout decided?
The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Parts usage links to the job. Use this check when reviewing the first working version.
Related functions for heavy equipment and forklift dealers.
Discuss job cards for your business.
Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements