Skip to main content
GullySystem
Healthcare

Business solutions for Hospital furniture manufacturers

Explore software for work such as “Architect and hospital planner relationships”. Review each business function below, including when it fits and what to check before implementation.

Hospital furniture manufacturers

How the business operates.

A hospital bed looks simple until you list its parts. There is steel tube, side rails, a mattress platform, actuators, a hand control, braked castors and a foam mattress. Each part has a supplier, and each supplier has a lot.

Tender schedules and quotations

Price every line of a hospital tender from tube weight, coating, actuators, castors and mattress, then keep each revision. Old quotes stay readable.

Cutting lists and frame jigs

Release tube cutting lists and weld jig numbers per bed model, with the bill of materials behind them.

Coating and finish records

Link each powder coat or polish run to the frames in it, with colour code, cure and thickness readings.

Assembly and load checks

Record actuator, rail, castor and mattress fitting per serial, and the load and brake checks done before packing.

Ward-wise packing and delivery

Build packing lists per ward drop from the confirmed order, and print a delivery note per drop.

Spares and warranty by serial

Hold a serial for each bed, so a replacement hand control or castor set is quoted against what was supplied.

Tender bid security tracker

Bid security deposits, submission deadlines and opening dates for hospital tenders are recorded per bid. Accounts see what is locked up with each buyer. Refund dates are chased after the award.

Actuator and motor bench tests

Every electric bed actuator and motor is run on a test bench before fitting. Load, noise and limit switch results are saved with its serial. Bad units go back to the supplier.

Ward installation and sign-off

Installers take beds and trolleys to the ward, place them and get a signed receipt from the nursing in-charge. Photographs and counts match the tender lot. Accounts bill from the signed sheet.

Buyer sample approval record

Before a bulk order, a sample bed or locker goes to the hospital for approval. Comments, revisions and the approval date are recorded. Production starts only after the signed sample is on file.

The records that hold the operation together.

  • Tender schedules. Enter a hospital tender line by line with model, size, colour and ward quantity, and compare it with what has been built.
  • Costing and quotations. Price beds, lockers and trolleys from tube weight, sheet, coating, fittings and packing, and keep each revision for the buyer.
  • Tube cutting lists. Release cutting lists and bend or weld jig numbers per bed model, with the bill of materials behind each list.
  • Welding and frame tracking. Record frames welded by bay and welder, with rework and rejects, so work in progress is counted at each bench.
  • Coating and polishing runs. Group frames into rack loads, note colour code, cure and thickness, and link every frame to its run.
  • Actuator and castor lots. Hold lot numbers of motors, hand controls and castors, and attach them to the serial of the bed that received them.
  • Mattress and platform work. Plan foam cutting, covering and platform fitting so mattresses are made for the beds on the same order.
  • Load and brake checks. Capture rail load, platform load, castor brake and finish checks per serial, with the inspector and date.

Operational bottlenecks to check

Tender lines each carry an item code

A single tender may list thirty furniture lines, each with its own colour, size and fitting. Quantities are tracked in a spreadsheet separate from the shop floor. Mistakes creep in.

Frames and actuators lose their link

Once a welded frame is coated and assembled, nobody can say which actuator or which tube batch went into which bed.

Coating runs are not tied to beds

Powder coat colour and cure records sit on the oven log, while the beds sit in a different file. When a ward reports flaking paint on a bed rail, nobody can say which oven batch coated it.

Part deliveries arrive by ward

Wards ask for drops on different dates, so the packing list for one ward is built by hand from several work orders.

Spares after sale are quoted blind

A ward asks for a replacement hand control or castor set, and the office does not know which model was supplied there.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Tender intake

    The tender schedule is entered line by line with sizes, colours, fittings and ward quantities, and priced from your rates.

  2. 2. Cutting and fabrication

    Tube cutting lists and jig numbers are released per model. Welders record the frames finished and any rework.

  3. 3. Pretreatment and coating

    Frames are grouped into rack loads, coated or polished, and each run is saved with colour, cure and thickness readings.

  4. 4. Fitting and assembly

    Actuators, rails, castors, hand controls and platforms are fitted and the lot numbers of motors and castors are noted against the serial.

  5. 5. Checks and packing

    Load, brake and finish checks are signed on screen, then beds are packed ward by ward.

  6. 6. Delivery and aftercare

    A delivery note per ward drop is printed, and the serial list becomes the basis for later spares and repairs.

Roles and responsibility boundaries.

For the tender desk

Enter schedules, price lines, track revisions and see which wards are yet to be supplied.

For fabrication and welding

See the cutting list and jig for each model, and record frames completed and reworked.

For coating and finishing

Plan rack loads, save colour and cure readings and link them to each frame.

For assembly and quality

Fit components against the serial, sign load and brake checks, and hold back beds that fail.

For dispatch

Pack by ward, print the note for each drop and record the vehicle and receiving ward.

Reports your managers need.

  • Tender lines supplied against ordered, by ward
  • Frames in welding, coating and assembly
  • Coating runs with colour and thickness readings
  • Actuator and castor lots against bed serials
  • Beds failing load or brake checks
  • Ward drops packed and delivered
  • Spares supplied by bed model and ward

Connections to scope

  • Email
  • SMS
  • WhatsApp or other messaging
  • Barcode and label printers
  • Accounting export

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Bed models and bills

Bed, locker and trolley models go in with their tube sizes, fittings and welding jigs, laid out like your cutting lists.

Tender formats

Schedules from your usual hospital buyers are loaded as templates so lines can be copied in quickly.

Coating and check sheets

Rack load fields, thickness readings and load check items follow your own shop practice.

Serials and lots

You choose which items carry a serial and which are tracked by lot, such as castors or drip stands.

Tax and currency

Tax invoice formats and currency are set per customer and reviewed during implementation.

Limitations to settle before implementation

  • A workshop that makes a few lockers to order and has no tender work may only need a quotation tool.
  • Medical electronics makers that need device history files will find Medical Device Manufacturer Management Software closer.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Architect and hospital planner relationships
  • Dealer and distributor network
  • Sample and site visit follow-up
  • Quotation tracking across committee decisions
  • Warranty and repair response
  • Government hospital tender readiness
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements