Skip to main content
GullySystem
Manufacturing

Business solutions for Industrial chemical manufacturers

Explore software for work such as “A vendor registration pack that is ready before a buyer asks”. Review each business function below, including when it fits and what to check before implementation.

Industrial chemical manufacturers

How the business operates.

Bulk chemicals are sold on purity and on volume. A buyer wants an acid at a stated concentration, a solvent at a stated assay, or a salt in a stated grade, and expects the same figure on every tanker. Margins are thin, so yield and loss matter.

Raw material intake and gate weights

Record each tanker, wagon or drum arriving, with gross and tare weight, supplier assay and the tank or store it was unloaded to.

Reactor batch records

Capture charge quantities, temperature, pressure, in-process samples and the operator for every batch, against the recipe.

Assay and laboratory results

Save concentration, density and impurity results per batch and per tank, with the limits your laboratory applies.

Yield and loss reporting

Compare actual output with theoretical for each batch and product, and record the reason when it falls short.

Tank farm stock

Hold the level, density and composition of each tank, and post every transfer, receipt and draw against it.

Packing and tanker dispatch

Fill drums and containers with batch labels, and weigh tankers empty and full to issue a loading ticket.

Certificates and safety data sheets

Print the certificate of analysis for the loaded batch and attach the current safety data sheet to the dispatch.

Hazardous goods storage limits

Each product is listed with its hazard class and the quantity allowed in a storage area. Operations see when a receipt would break a limit. Incompatible products are kept apart on the map.

Effluent and waste disposal

Waste drums, spent solvent and effluent tank transfers are recorded with quantity and the licensed carrier. The safety officer keeps the manifest. Disposal dates are tracked against each licence.

Reactor cleaning and changeover

Between products, each reactor and line is logged with the flush done and the sign-off. The shift chemist sees what the vessel last held. Cross contamination risks are flagged before charging.

The records that hold the operation together.

  • Gate and weighbridge records. Record gross and tare weights, vehicle, driver and seal numbers for every tanker, wagon and drum load going in or out of the gate.
  • Raw material receiving. Match each delivery to its purchase order, store the supplier assay and post stock to the right storage tank or warehouse bay.
  • Recipes and charge sheets. Hold the recipe for each product, scaled to vessel size, and compare the charge actually made against it.
  • Reactor batch records. Capture temperatures, pressures, hold times, in-process samples and the operator against each batch.
  • Laboratory assays. Save concentration, density, colour and impurity results per batch and tank, against limits your chemists set.
  • Yield and loss analysis. Show actual against theoretical output per batch, and record the cause of any shortfall such as carry-over or a filter loss.
  • Tank farm inventory. Track level, density and mixed batches for each tank, with every transfer through the pump manifold posted in and out.
  • Drum and container filling. Label and weigh drums and intermediate bulk containers, and link each one to its batch.

Operational bottlenecks to check

Yield is calculated after the fact

Theoretical output is held in a spreadsheet, actual output in a tank log. The gap between them is reviewed monthly, after the cause is forgotten.

Assay results are not tied to the tank

A tank is filled from three batches. The strength shown on the certificate is the last result entered, not the blended figure.

Weighbridge tickets are separate

Gate weights are kept on a standalone computer. Reconciling them with orders and tank draws is a clerk’s afternoon task.

Safety data sheets are out of date

A revised sheet is issued by the technical team. Old copies stay in dispatch folders and go out with the next drum.

Stock in tanks is estimated by gauge

Operators read a level and write a figure. Differences between tank stock and the books surface at the quarter end.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Intake

    Tankers, rail wagons and drums are weighed at the gate, sampled with a thief probe and unloaded to a tank or store, with the supplier’s assay noted.

  2. 2. Batch planning

    A production order picks the recipe, the glass-lined or stainless reactor and the raw lots to charge.

  3. 3. Reaction

    Charge quantities, jacket temperature, pressure and in-process samples are recorded while the batch runs and the agitator turns.

  4. 4. Assay and release

    The laboratory saves concentration by titration, density by hydrometer and impurity by chromatograph. The batch then moves to a finished product tank or stays on hold.

  5. 5. Packing and loading

    Drums and IBCs are filled under batch labels. Tankers are weighed empty and full against the order.

  6. 6. Documents

    The certificate of analysis, safety data sheet and delivery note are printed from the batch and the order.

Roles and responsibility boundaries.

For plant managers

See yield against theory, tank stock and the orders still to load on one screen.

For reactor operators

Open the batch recipe, record each charge and temperature reading, and request a sample for the laboratory bench.

For laboratory chemists

Key in titration and density results for each batch and tank, then release or hold the batch against its limits.

For the weighbridge and dispatch

Weigh tankers in and out, load against the order and print the documents that travel with the vehicle.

For safety and compliance staff

Keep the current sheets and drum labels for each product, and see which dispatches used them.

Reports your managers need.

  • Yield against theoretical by batch and product
  • Tank stock by product, density and age
  • Assay results released and held
  • Tankers loaded and drums filled by order
  • Raw materials received against purchase orders
  • Safety data sheet versions sent by customer
  • Waste streams by batch and disposal route

Connections to scope

  • Email
  • SMS
  • WhatsApp
  • Weighbridge feed
  • Level gauge feed
  • Accounting export

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Products and recipes

Each chemical, grade and recipe is loaded with its reactor size and assay limits.

Tank farm layout

Tanks, pipelines, bunds and storage areas are set up as they stand on site.

Documents and labels

Certificates, sheets and drum labels follow the wording your safety and regulatory staff approve.

Instrument links

Weighbridge and radar level readings can be keyed in at first, then fed from the instruments later.

Records migrated

Customer accounts, product lists, open orders and current tank contents are keyed in before launch.

Messages and documents

Delivery notes, certificates and tax invoices go by email, and load alerts by SMS or WhatsApp.

Limitations to settle before implementation

  • A formulator of small-volume performance products will find Specialty Chemical Manufacturer Management Software closer.
  • A water treatment contractor that applies chemicals on site may prefer Water Treatment Company Management Software.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • A vendor registration pack that is ready before a buyer asks
  • A single place where every rate enquiry is logged and chased
  • Introductions to purchase teams in the industrial areas around the plant
  • Terms for traders that protect the end-user relationship
  • Dispatch updates that reach the buyer before the buyer has to ask
  • Reactivation calls to customers who stopped ordering
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements