Skip to main content
GullySystem
Manufacturing

Business solutions for Medical device manufacturers

Explore software for work such as “Diagnostic imaging equipment”. Review each business function below, including when it fits and what to check before implementation.

Medical device manufacturers

How the business operates.

Medical device plants make everything from single-use syringes and catheters to electronic patient monitors. The product differs, but the records they must keep look alike: component lots, routing steps, inspection results, UDI labels, sterilisation certificates, shipments and complaints.

Bills of materials and revisions

Hold each device as a revisioned list of components and labels, with an effective date so the floor builds to the current revision. Superseded lists are locked from use.

Production orders and routings

Release an order for each lot with its routing, work cell, tooling and operator, and record each step as it is completed, from moulding through assembly to final pack.

Lot and serial traceability

Link component lots, finished lots, serial numbers, UDI codes and shipments, so a recall trace runs forwards to customers or backwards to the resin and board suppliers from one search.

Inspection and release

Record incoming, in-process and final results against a sampling plan. A failed lot is held in quarantine until a reviewer decides what happens to it, and the decision is signed.

Complaints and corrective actions

Log each complaint against its lot and carry the investigation, the nonconformance report, the CAPA and the closing approval on one record, with due dates and owners.

Supplier approval and outside processing

Keep approved supplier status, audit dates and sterilisation or coating certificates, and send parts out on a delivery note that returns with its processing paperwork and lot numbers.

Cleanroom environment and gowning log

Logs particle counts, differential pressure and gowning checks for each cleanroom shift. The production head sees any reading out of range before a lot is started. Entries sit beside the lot made that day.

Gauge and test equipment calibration

Lists each gauge, torque driver and leak tester with its calibration date and next due date. Inspectors see an overdue instrument before use. Measurements link back to the instrument that took them.

Label and instructions artwork

Keeps the label and instructions for use for each device model, with revision and approval date. The packing supervisor prints only from the approved artwork. Withdrawn versions are locked.

Market registrations and certificates

Tracks the registration files and quality certificates held for each market, with expiry dates. The regulatory lead sees which are due for renewal. Distributors request copies from here.

The records that hold the operation together.

  • Quotations and price lists. Build quotations for devices, accessories and contract runs from your own price lists, with quantity breaks, mould tooling charges and every revision kept for the customer file.
  • Bills of materials with revision history. Hold each device as a list of components with quantities, a revision letter and an effective date. A new revision replaces the old one on the floor from that date.
  • Production orders and routings. Release a production order for each lot with its routing, press, mould cavity, extrusion line, operator and planned date. Record each step as it finishes, with the cleanroom area and the equipment used.
  • Lot, serial and UDI records. Number every component lot and finished lot, assign serial numbers where needed, and hold label data including UDI-DI and UDI-PI fields. Trace a device forwards to hospitals or backwards to resin. One search does both.
  • Incoming, in-process and final inspection for device lots. Set an inspection plan for each part and device, with sampling levels, lumen and torque limits, particulate counts, seal peel strength and acceptance limits. Record measurements and pass or fail results. A failed lot is held from release.
  • Complaints and corrective actions. Log each complaint with its lot and investigate it. Assign a corrective and preventive action with an owner, record any biocompatibility query, and close it with an approval and a trend by device and cause.
  • Controlled documents and approvals. Keep procedures, work instructions, specifications and validation protocols with revision numbers, reviewers and approval dates. Floor staff open the current copy, while superseded sheets are withdrawn from every workstation.
  • Supplier approval and purchasing. Hold the approved supplier list with audit dates, quality agreements and certificates. Raise purchase orders only to approved sources, and compare rates and delivery record across moulders, pouch printers and resin vendors.

Operational bottlenecks to check

Trace records live in separate files

Goods receipts, production sheets and shipping lists sit in different places, so a trace from one finished device to its resin batch or circuit board means opening each of them. An audit day stretches.

Old revisions stay in circulation

A device master record is updated, but a printed copy of the earlier bill of materials stays at a workstation. Parts are built to the wrong list. Rework follows.

Inspection forms are filed away from the lot

Signed torque, leak and dimensional checks are stored in binders by date, so finding the result for one lot months later takes a search through boxes.

Complaints and actions are tracked apart

A complaint arrives by email, while the investigation and the CAPA are written in other documents. Closure then depends on memory, and the nonconformance report is filed separately.

Supplier approval lapses unnoticed

Audit dates, quality agreements and sterilisation certificates sit with one person, so purchasing can raise an order to a source whose approval has expired. Nobody sees it until an auditor asks.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and quotation

    A hospital, distributor or brand owner asks for a device or a contract run. Your device price list and its quantity breaks feed each quotation, and the specification revision is noted on it.

  2. 2. Order and production plan

    A confirmed order becomes a production order against the current bill of materials revision. Planners see which components, mould tools and extruders are needed. The routing starts at the first operation.

  3. 3. Receiving and approved parts

    Components arrive from approved suppliers and wait in quarantine until incoming inspection is signed, so nothing reaches the cleanroom early. Each receipt creates a component lot, and gowning and area logs link to it.

  4. 4. Production and inspection

    Operators record each step against the lot, including mould cavity, extrusion line or autoclave cycle. In-process and final checks follow the inspection plan, and a failed burst or leak test blocks release until quality decides on rework or scrap.

  5. 5. Release and shipment

    A released lot is packed and shipped with its serial numbers or lot number, and the customer, the lot and the invoice are linked. Dispatch is one step. The device history record closes complete.

  6. 6. Feedback and corrective action

    Complaints and returns are logged against the lot. Investigations, corrective and preventive actions and approvals are recorded until closure, and a trend by device and cause feeds the management review.

Roles and responsibility boundaries.

For owners and quality heads

See lots in production, orders due, open complaints, supplier reviews and stock value on one screen. Every figure opens the records behind it, down to the individual lot.

For quality and regulatory teams

Run inspections, review complaints, approve documents and pull a trace report for any lot. Open corrective actions and overdue supplier audits are listed first, ahead of everything else.

For production planners

Plan orders against components, mould tools and extruders, and release production orders with the right revision. Shortages are flagged before release. No order starts without its parts.

For operators and technicians

See assigned production orders, record steps and gauge readings, and flag a problem from a shop floor screen. Work instructions open at the step being done, with the pin gauge and limit shown.

For purchasing and stores

Raise orders to approved suppliers, receive goods, hold them in quarantine and issue approved lots to production. Expiry dates and reorder levels show on the stock screen.

Reports your managers need.

  • Lot trace from finished device to component lots and shipments
  • Production orders by status, machine and due date
  • Inspection results and failures by part and supplier
  • Complaints by device, cause and closure status
  • Corrective actions open, overdue and closed
  • Supplier approval status and certificate expiry
  • Stock of components and finished goods by location

Connections to scope

  • Email
  • SMS
  • WhatsApp and other messaging
  • Barcode and label printers
  • Accounting software export
  • Spreadsheet import

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Your device families and parts

Part numbers, bills of materials, revision rules and routings are loaded as your quality system describes them, and device families are grouped the way your regulator files them.

Inspection plans and forms

Checks, measurement fields and acceptance limits are set for each part and device, so operators fill in what your procedures ask for at incoming, in-process and final stages.

Approval steps

Who reviews a document, a complaint or a release is set to your own sign-off order. Your quality head reviews that order during implementation, and later changes are made on request.

Labels and tax settings

Label fields, document layouts, currencies and tax rules are set for each market you ship to, with UDI data held where a market asks for it.

Records brought across

Part masters, supplier lists, open orders and stock balances are imported from your spreadsheets or present system. Quality staff test a sample against shelf stock first.

Hosted by GullySystem

GullySystem hosts the system, so quality, production and stores work from the same records. Edits come from our staff, and your quality head signs off each change before it goes live.

Limitations to settle before implementation

  • A distributor that only buys and resells finished devices needs stock and invoicing more than production records.
  • A hospital or clinic that only uses devices, not makes them, is better served by Hospital Operations Management Software.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Diagnostic imaging equipment
  • Surgical instruments
  • Patient monitoring devices
  • Disposable and single-use devices
  • Hospital furniture and fixtures
  • In-vitro diagnostic kits
  • Export and international distributor deals
  • Government and institutional tenders
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements