Skip to main content
GullySystem
Manufacturing

Production Planning for Metal stamping companies

Plan manufacturing quantities against demand, materials and capacity.

Manufacturing

Does this function belong in your operation?

Use when the business manufactures, assembles or prepares physical products.

Confirmed demand needs a production schedule.

The planner books a press for each part against the call-off dates, allowing for the die change and the coil on hand. A press stuck in a changeover moves the next job. Late coil shifts the plan.

Bring the records the workflow depends on.

  • Demand and due dates
  • Material availability
  • Production capacity and calendars

Outputs to check

  • Demand-linked production schedule
  • Material and capacity exception list
  • Released-work requirement record

Follow the production planning workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Collect demand

    Use confirmed orders and approved replenishment requirements.

  2. 2. Calculate output needs

    Apply the appropriate material and production definitions.

  3. 3. Check constraints

    Compare required materials and capacity with available resources.

  4. 4. Approve the sequence

    Set priorities and record any displaced or deferred work.

  5. 5. Release and monitor

    Create work-order handoffs and revise the plan using actual progress.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Production in-charge

Lays out the day or the week and adjusts it when a machine stops.

Storekeeper

Checks the materials required by released work and identifies shortages or unissued quantities.

Owner

Reads how much of the plan is being met, and where the same excuse keeps appearing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Material shortage

Identify the affected output and revise the release or purchasing action.

Machine unavailable

Reschedule the dependent work and check alternative capacity before confirming dates.

Urgent order inserted

Record which existing jobs move and obtain the required priority decision.

Can this work independently?

Planning needs demand, material definitions and capacity assumptions. These can be entered independently, but order, stock and work-order links keep the plan aligned with actuals. Releasing a plan does not issue material or record completed output; those execution steps need their own records.

Systems and records it connects with

  • Bill of materials: Approved component quantities and production-definition versions.
  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Purchase orders: Authorised supplier commitments and open line balances.

Configure, test and introduce the workflow.

  • Walk us through machines, ovens or lines and the shifts they run. A written map of capacity comes back.
  • Tell us which items repeat daily. A set of standing quantities is returned for approval. Sales orders and stock arrive from your existing records. A trial plan appears for a sample day.
  • Overlap for a while. The floor uses the screen while the whiteboard stays up, and differences are noted.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Planned quantities reconcile with demand.
  • Shortages are visible before release.
  • Capacity assumptions are recorded.
Metal stamping companies

How the business operates.

A press stamps thousands of parts an hour using a die built for one part. A chipped punch leaves burrs on the bracket. A worn die button does the same. A coil from the wrong heat splits the flange of a deep drawn cup.

Quotation by strip pitch and tonnage

Price a part from strip width, pitch, material weight, press tonnage and strokes per minute, with tooling cost shown separately or amortised.

Die register and stroke counter

Hold each die with its rack location, press and bolster fit, strokes since sharpening and repair history, so wear is read from counts.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and drawing revisions. Log each enquiry with drawing, material grade and annual volume. Keep drawing revisions with the part, and link each die to the revision it was cut for.
  • Quotation by strip pitch and tonnage. Price from strip width, pitch, material weight and tonnage. A die funded by the customer is quoted as its own line, while one funded by you is spread across each blank sold.
  • Blanket orders and call-offs. Hold the standing order with its total. Release each call-off against it, and read the open balance without adding up delivery notes by hand.
  • Coil receipt and lot trace. Book coils in with grade, thickness, width, weight and heat number. Each coil links to the runs and bins that consumed it, so a cracked heat is chased to the exact bins.

Operational bottlenecks to check

Die life is judged by sound and burr height

A punch is sharpened when the operator decides the burrs look bad. Nobody knows the stroke count. Wear is found late, mid run.

Coil lots are not tied to finished parts

A split appears in one bin of brackets and the mill names the coil, yet no record shows which other bins were blanked from it. The customer’s recall sweeps in far more parts than needed.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and tooling decision

    A drawing and annual volume arrive. The estimator notes strip pitch, material grade and press tonnage, then records whether the customer pays for the progressive die or the shop recovers it through the part price.

  2. 2. Quotation and blanket order

    Material weight, press rate, scrap allowance and tooling terms make up the price. An accepted quote becomes a blanket order with a standing quantity, and call-offs release against it until the total is used.

  3. 3. Coil receipt

    The mill certificate travels with the coil. Its grade, thickness, width, weight and heat number are booked in before the coil goes to a numbered rack bay, so the stores crew can find it again.

  4. 4. Setup and first-off

    The planner sequences runs by die and press. The setter mounts the die, adjusts the stripper and feed pitch, threads the coil through the straightener, and gets first-off approved by the inspector.

  5. 5. Production and checks

    Strokes, good parts and scrap are logged per run. Burr height, hole position and flatness are measured at the interval the control plan fixes for that part, and the readings stay on the run.

  6. 6. Outside steps and dispatch

    Parts needing zinc plating or case hardening are booked out to the vendor on a delivery note. Finished bins are counted into the call-off at dispatch, and the invoice follows.

Industry reports to connect with

  • Press hours and good parts per hour, by press and die
  • Strokes since regrind, by die
  • Coil lots consumed and the runs they fed
  • Call-offs due, shipped and still open per customer

Questions before implementation.

When should metal stamping companies consider production planning?

Use when the business manufactures, assembles or prepares physical products. Confirmed demand needs a production schedule.

What should we bring to the requirements discussion?

Bring anonymised examples of Demand and due dates; Material availability; Production capacity and calendars. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Plan manufacturing quantities against demand, materials and capacity. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Production output depends on actual materials, equipment and execution. The plan records assumptions and revised decisions as those conditions change.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Planned quantities reconcile with demand. Use this check when reviewing the first working version.

Talk to us

Discuss production planning for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements