Skip to main content
GullySystem
Real estate and construction

Invoice Management for Modular kitchen companies

Create and track invoices against billed goods or work.

Finance & Accounting

Does this function belong in your operation?

Use when bills need links to orders, delivery or completed work.

A supply or milestone becomes billable.

The booking amount, the factory release payment and the final balance are billed as separate invoices on one kitchen. Changed appliances adjust the last one. Pending dues show on the customer record.

Bring the records the workflow depends on.

  • Customer details
  • Approved billing lines
  • Numbering and tax settings

Outputs to check

  • Issued invoice register
  • Customer outstanding statement
  • Billing and receipt reconciliation

Follow the invoice management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify billable work

    Use the approved order, delivery or milestone reference.

  2. 2. Prepare invoice lines

    Check customer details, quantities, rates and tax settings.

  3. 3. Approve and issue

    Assign the authorised number and retain the issued document.

  4. 4. Send required handoffs

    Pass applicable documents to accounting or electronic registration processes.

  5. 5. Track settlement

    Allocate receipts and handle disputes or credits without overwriting the issued invoice.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Accounts assistant

Raises the day’s bills, applies receipts and works the overdue list from the top.

Sales executive

Sees whether their customer has paid before they ask for the next order. It saves an awkward conversation.

Owner

Sees what was billed this month, what was collected, and the difference still outstanding.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Duplicate billing request

Check the source order or milestone before creating another invoice.

Customer disputes a line

Retain the issued document and use the approved correction or credit process.

Partial payment

Allocate the receipt and leave the remaining amount outstanding without marking the invoice fully settled.

Can this work independently?

Invoicing can work from entered approved lines without order or stock modules. Connections bring in accepted quantities and pass receivables to accounting. e-Invoicing, payment collection and stock dispatch are distinct processes; issuing a bill does not confirm any of them occurred.

Systems and records it connects with

  • Receipts management: Recorded customer payments and invoice allocations.
  • E-invoicing: Applicable invoice-registration references and response status.
  • Credit control: Customer limits, current exposure and authorised order releases.
  • Accounting software: Posted financial entries and reconciliation references.

Configure, test and introduce the workflow.

  • Send sample invoices and your numbering. Staff see a list of tax details and the layout to match.
  • Confirm the face of the bill. A test invoice from a test order comes back for inspection. Share unpaid bills and customer balances. They load as a trial and show on the overdue list for accounts to check.
  • Sales and accounts staff practise on test orders. Short sheets for each role follow. The new series begins on the date you fix. The first overdue list is reviewed together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Invoice numbers are unique.
  • Totals reconcile with approved lines.
  • Partial payments leave accurate balances.
Modular kitchen companies

How the business operates.

A kitchen is built to millimetres and changed on a phone call on a Sunday. A new extractor model, or a sink moved by two hundred millimetres, can undo a cutting list that is already on the panel saw.

Measurement and site points

Record walls, windows, and the plumbing, gas and power points with photos before the design begins, since a gas point cannot move once the tiles are on.

Design revisions and approval

Keep each revision with its own quote, and record the customer’s approval against the final one.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Showroom enquiries and site visits. Record each client, the flat or site, the kitchen shape discussed, who referred them, and the measurement visit booked.
  • Site measurement sheets. Hold wall lengths, ceiling height, beam drops, window sills, door positions and existing gas, water and drain points for every kitchen measured.
  • Design drawings and revisions. Keep each layout version, the renders shown to the client and the change asked for, so the approved revision is clear. Nothing is overwritten.
  • Carcass board and shutter finish selection. Set the board grade and the shutter finish for each unit, from your own list of plywood, MDF, HDF, laminate, acrylic and paint options.

Operational bottlenecks to check

The factory makes the old revision

The tall unit changes, the factory has the earlier file, and a full carcass is wasted. The remake takes weeks.

Site points move during civil work

The gas point and the sink outlet are not where the drawing says, and the modules do not fit. Changes follow on site.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry

    A client walks into the showroom, calls, or comes through an architect. The flat, the kitchen shape and the budget range discussed are noted against the enquiry.

  2. 2. Site measurement

    A measurer visits the flat and records wall lengths, ceiling height, beam drops, window and door positions, and any wall that is out of plumb at the corner. Existing electrical, water, gas and drain points are marked on the same sheet.

  3. 3. Design and selection

    The layout is drawn and the kitchen is broken into base, wall, tall and loft units. Carcass board, shutter finish, handles and hardware are chosen unit by unit with the client.

  4. 4. Quotation and approval

    Each unit is priced with its finish and hardware, and appliances, hob and countertop are added. The client signs off a drawing revision and pays the advance.

  5. 5. Production and purchase

    The approved drawing becomes a cutting list and assembly job for the factory or the panel supplier, with offcuts from the beam saw reserved for fillers and shelves. Boards, hardware, countertop and appliances are ordered against the project.

  6. 6. Installation and handover

    Carcasses are levelled, shutters aligned and the countertop, hood and sink fitted. Snags are listed and cleared. The balance is billed and hardware warranty is recorded.

Industry reports to connect with

  • Enquiries by source and how far each reached
  • Kitchens by stage, from measurement to handover
  • Design revisions and approval dates per project
  • Quotations given, approved and closed without an order

Questions before implementation.

When should modular kitchen companies consider invoice management?

Use when bills need links to orders, delivery or completed work. A supply or milestone becomes billable.

What should we bring to the requirements discussion?

Bring anonymised examples of Customer details; Approved billing lines; Numbering and tax settings. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Create and track invoices against billed goods or work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Your accountant confirms tax treatment and invoice requirements.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Invoice numbers are unique. Use this check when reviewing the first working version.

Talk to us

Discuss invoice management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements