Skip to main content
GullySystem
Manufacturing

Business solutions for Office furniture manufacturers

Explore software for work such as “Modular workstations for IT and BPO floors”. Review each business function below, including when it fits and what to check before implementation.

Office furniture manufacturers

How the business operates.

Most office furniture is sold as a project, not a single item. A fit-out contractor or an office tenant sends a floor plan and a schedule. The maker supplies hundreds of desks, chairs and cabinets, floor by floor, to a site that is still being finished.

Project orders and phases

Hold each fit-out as an order split by floor and delivery phase, with item types, finishes and quantities, so the shops release only what the site can receive.

Bill of materials by item

Keep boards, edge tape, steel sections, fittings and fabric for each desk, cabinet or chair. The finish chosen decides which board and fabric are drawn.

Panel, steel and upholstery stages

Track parts through board cutting, bending and welding, powder coating, upholstery and assembly with counts at each stage and the name of the supervisor who signed each count off.

Hardware packs and kitting

Build and count hardware packs per workstation. Kit parts so each carton is checked against its list before it leaves, not after it reaches the floor.

Finish and fabric lots

Record board and fabric lots against items. One floor, one lot.

Installation and snag lists

Assign crews to floors, record handover and list damage or shortages so replacement parts are tracked.

Powder coating and finishing queue

The finishing supervisor lists frames waiting for pretreatment, coating and curing, by colour and project. Oven loads are planned. Frames rejected for coating defects return to the steel shop.

Sample and showroom workstation register

The sales team records sample chairs, desks and fabric swatches sent to clients or kept at the showroom. Loan dates and return status are noted. Lost samples show against the project.

Site installation crew attendance

Supervisors mark which installers worked on which floor of a fit-out each day. Hours and travel are recorded. The project manager compares crew days with the installation plan.

Warranty and replacement parts record

A client reports a gas lift failure or a loose caster on a delivered chair. The record logs the project, the item, the fault and the part sent. Warranty cover period is shown.

The records that hold the operation together.

  • Quotations from floor plans. Price workstations, task chairs and credenzas by type and finish from the contractor’s furniture schedule, and keep each revision of the quotation with its date and drawing sheet number.
  • Project orders and phases. Hold each fit-out as an order split by floor and delivery phase, with item types, laminate codes and quantities, so the shops release only what the site cabin can receive that week.
  • Bill of materials by item. Keep chipboard, PVC edge tape, square tube, cam locks, wire grommets and fabric for each desk, pedestal or chair, with the chosen finish applied to the right lines only.
  • Board and fabric stock. Count melamine boards, edge tape rolls, polyurethane foam blocks, upholstery fabric and tilt mechanisms by lot, with what each project has reserved from the racks.
  • Panel, steel and upholstery stages. Track parts through the beam saw, edgebander, tube bender, MIG weld bay, powder coating and upholstery table, with a count at each stage. A reworked part gets a note.
  • Powder coating and outside processes. Send frames to the coating line or an outside coater on a delivery note, record the RAL colour and counts, and compare what returns with what left the gate.
  • Hardware packs and kitting. Build and count hardware packs per workstation. Check each carton against its list at the dock door, not after it has been carried up to the sixth floor.
  • Finish and fabric lots. Record laminate, board and fabric lots against items, with the Martindale rub grade noted for seating cloth, so that a single floor ships from one lot.

Operational bottlenecks to check

Project orders hide the item detail

A single order covers different workstation types in several finishes. Totals look healthy while one finish or one chair model is behind.

Hardware packs go short

A desk is complete only with its screws, cam locks, cable grommets and brackets. Packs are counted by eye, and a missing item is discovered on site.

Finish and fabric lots differ

A laminate or fabric from a later lot looks different from the first. Items for one floor are then shipped from two lots.

Powder coating is a blind spot

Steel frames go to a coating line or an outside coater. Colour, film thickness and returned counts are noted on paper, if at all.

Snag lists live on site

The installation crew scribbles each chipped worktop and missing castor onto a paper sheet. The factory learns of them days later, and the replacement part leaves stores on a verbal request.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Quotation

    The floor plan and furniture schedule are priced by bench, desk and pedestal type, and the client signs off laminate chips and fabric swatches before the first board meets the beam saw.

  2. 2. Project order

    The order is split into floors and delivery phases, with each item type carrying its own quantity. A half-delivered floor reads as such.

  3. 3. Material and cutting

    Chipboard, MDF, square tube and polyurethane foam are reserved, and cut lists, frame lists and chair kits go out to the beam saw, tube laser and sewing tables.

  4. 4. Fabrication

    Panels are edged with PUR hotmelt and drilled for dowels. Frames are bent, MIG welded and sent for pretreatment and coating, while chair seats are stapled, covered and assembled onto gas lifts and castor bases.

  5. 5. Kitting and dispatch

    Hardware packs are checked against the list. Cartons are packed by workstation and loaded in the order the crew will unpack them on each floor, so the first bay opens first.

  6. 6. Installation and handover

    Crews install floor by floor and photograph each snag, and every one is closed before the stage invoice clears for the contractor. Handover waits for it.

Roles and responsibility boundaries.

Managing director

See projects by phase, margin against the quotation, retention outstanding, and installations that have slipped behind the contractor’s programme of works.

Estimators

Price from the floor plan and schedule, keep every revision, and hand a clean order to the shops with costing still tied to the bill of materials.

Shop supervisors

Release cut lists, frame lists and chair kits, then record counts at the edgebander, the weld bay and the upholstery table. Rework is noted there too.

Stores and dispatch

Reserve boards and fabric, kit hardware packs, and load cartons in installation order. Mixed laminate lots are flagged first, before the lorry is loaded.

Installation crews

See the floors assigned, record handover, and log snags with photographs from a phone while standing at the desk in question.

Reports your managers need.

  • Items made against items ordered, by project, floor and phase
  • Chipboard, PVC edge tape and fabric use against the bill
  • Cam lock and grommet packs short by workstation
  • Frames sent to the coater and returned by RAL colour
  • Open snags by project and floor
  • Quotation against actual cost per fit-out
  • Retention held by the contractor and due for release

Connections to scope

  • Accounting export
  • Nesting and cut optimisation file import
  • Barcode or label printer
  • Email
  • Messaging for crew updates
  • Photo capture from phones

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Your item catalogue and finishes

Workstations, desks, task chairs and storage units are entered with the laminate, fabric and powder colour options, sizes and extras you quote.

Bills of materials

Chipboard, edging, tube sections, fittings and fabric for each item are keyed by hand or loaded from your costing sheets.

Shop stages

Beam saw, edging, bending, welding, coating, upholstery and assembly are set as stages, each with the counts you want recorded.

Fit-outs already running

Running fit-outs, their floors and phases, and the boards on your racks are taken in from your project tracker and stock register before the first new order goes live.

Hosting and changes

The system runs on GullySystem servers. A new workstation range or carton label layout is a request to us, and we make the change.

Limitations to settle before implementation

  • A joinery shop making a few desks to order can run from a quotation book and a stock sheet, which costs far less than a system.
  • A retailer selling finished furniture from a showroom floor will find the furniture showroom product closer.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Modular workstations for IT and BPO floors
  • Ergonomic task chairs
  • Executive desks and cabin furniture
  • Meeting and conference tables
  • Lockers and storage for large offices
  • Co-working and hot-desk furniture
  • Government tender supply and GeM listings
  • Reception and lounge furniture
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements