Skip to main content
GullySystem
Healthcare

Job Work Management for Orthodontic clinics

Track material sent to an outside processor and returned after work.

Manufacturing

Does this function belong in your operation?

Use when your materials leave for processing and must be reconciled on return.

A production stage is subcontracted with material supplied by your business.

Aligner sets, retainers and special appliances go to the lab with the prescription, impressions or scan and the date wanted. Returns are checked at the chair. A late appliance appears on the lab list.

Bring the records the workflow depends on.

  • Vendor and process details
  • Material quantities
  • Return and wastage terms

Outputs to check

  • Subcontract dispatch and return register
  • Processor-held material balance
  • Job-work charge reconciliation

Follow the job work management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define outside processing

    Record the vendor, process and expected return terms.

  2. 2. Dispatch material

    Identify quantities, lots and the linked delivery document.

  3. 3. Track work outside

    Keep material balances and promised returns by processor.

  4. 4. Receive and inspect

    Record accepted output, waste and unresolved differences.

  5. 5. Reconcile charges

    Match processing bills and close only the settled material balance.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Writes the delivery note, receives the lots and knows which vendor is holding what this morning.

Production in-charge

Chases the process that is holding a job, and plans around the fortnight a coater takes.

Accounts assistant

Compares processing charges with authorised quantities and records unresolved material or rate differences.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Partial return

Record received output and leave the remaining material balance with the processor.

Excess wastage

Hold the difference for investigation and authorised disposition.

Material sent to another processor

Record an approved transfer with both locations identifiable instead of closing the original job.

Can this work independently?

This can track outside processing with entered dispatch and receipt records. Stock and accounting connections reconcile material ownership and processing charges; quality control decides acceptance. A vendor's completion message is not a physical return or proof that the returned output meets specification.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Vendor bills: Supplier invoice lines and authorised posting status.
  • Purchase returns: Approved supplier-return quantities and adjustment references.

Configure, test and introduce the workflow.

  • We list the outside processes you use and the vendors for each. You describe how notes and returns are handled today. A flow diagram comes back for your approval.
  • Rates, process names and wastage allowances are entered. You confirm them with the production team. Material currently lying outside is loaded from your registers. The store team checks balances with the vendors. Mistakes surface early.
  • New outward notes are made on the screen while the old book continues. Returns are booked and compared. The team is trained. The paper book is retired. The oldest balances are reviewed at the next meeting.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Sent and returned quantities reconcile.
  • Material held by each processor remains visible.
  • Charges link to the relevant job.
Orthodontic clinics

How the business operates.

Orthodontic care is long and steady. A case starts with records, photographs and a plan, then moves through adjustment visits for a year or two before retention begins, and each visit must build on the one before it. It is slow work. The clinic earns across the whole case, so every missed visit matters.

Adjustment visit diary

Book short recurring visits by chair and clinician, with the next interval set when the current visit closes.

Case record and treatment stage

Hold the diagnosis, the plan, the appliance type and the current stage, with each wire and elastic change noted by date.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Appointments by chair. Manage consultations, adjustments, bonding and debonding by chair, clinician and day, with the next visit booked before the patient leaves and the interval between visits shown on screen.
  • Patient and guardian records. Keep contact details, medical history, allergies and the guardian’s details for minors on one patient record, with every visit and consent form shown in order.
  • Case record and stages. Hold the diagnosis, malocclusion class, plan, appliance type and current stage, with archwire sequence, elastic wear and ligature changes noted by date on one case chart.
  • Photographs, scans and X-rays. Attach each set of facial and intraoral photographs, scans, panoramic films and cephalograms to the patient and the stage it belongs to, so start and progress sit together.

Operational bottlenecks to check

Cases lose their place

Wire changes, elastics and the next planned step live in handwritten notes. A different clinician opening the file cannot see what comes next. The plan sits in one head.

Appliance orders are chased by phone

Aligners, retainers and custom appliances come from a lab or a manufacturer. Due dates are kept in a chat, so the desk cannot say quickly which patient is waiting.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Consultation

    A new patient books by phone, message or the website. The desk opens a record, and the orthodontist notes the concern, the history and any guardian consent.

  2. 2. Records and plan

    Photographs, intraoral scans, panoramic films and cephalograms are taken and attached. The orthodontist sets the appliance, the stages and a fee estimate, and discusses extractions or expanders if needed.

  3. 3. Agreement and payment plan

    The family accepts the plan. A deposit and an instalment schedule are recorded against the fee, and the first receipt is issued at the desk.

  4. 4. Appliance fitting

    Brackets and archwires are bonded at the chair, or an aligner order goes to the manufacturer and the fitting is booked the day the set arrives.

  5. 5. Adjustment visits

    Each visit records the wire, the elastics and the next step. Missed visits show on the day list so the desk can call the same morning.

  6. 6. Retention

    At debonding, the retainer is ordered and fitted. Periodic checks are then listed for recall, so the patient is invited back before the teeth drift.

Industry reports to connect with

  • Active cases by stage and clinician
  • Collections by clinician and period
  • Balances due on payment plans
  • Appliance orders out, due and received

Questions before implementation.

When should orthodontic clinics consider job work management?

Use when your materials leave for processing and must be reconciled on return. A production stage is subcontracted with material supplied by your business.

What should we bring to the requirements discussion?

Bring anonymised examples of Vendor and process details; Material quantities; Return and wastage terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track material sent to an outside processor and returned after work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This concerns outsourced physical processing, not general professional-services subcontracting.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Sent and returned quantities reconcile. Use this check when reviewing the first working version.

Talk to us

Discuss job work management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements