Skip to main content
GullySystem
Manufacturing

Job Work Management for Packaging manufacturers

Track material sent to an outside processor and returned after work.

Manufacturing

Does this function belong in your operation?

Use when your materials leave for processing and must be reconciled on return.

A production stage is subcontracted with material supplied by your business.

Track printed sheets or cartons sent outside for lamination, UV varnish or foil stamping against their packaging job. The contractor must receive the correct artwork and finish instruction as well as the quantity. Returned work requires both a count and a finish check before it rejoins the customer's order.

Bring the records the workflow depends on.

  • Packaging job and customer box code with artwork and finishing revision.
  • Quantity sent in sheets or cartons, contractor details and agreed process instruction.
  • Return terms covering usable quantity, spoilage, rejected work and material remaining outside.

Outputs to check

  • Outside-finishing register identifying each job's location and the contractor holding its material.
  • Quantity reconciliation linking accepted finishing, damaged sheets, rework and the balance due.

Follow the job work management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define outside processing

    Record the vendor, process and expected return terms.

  2. 2. Dispatch material

    Identify quantities, lots and the linked delivery document.

  3. 3. Track work outside

    Keep material balances and promised returns by processor.

  4. 4. Receive and inspect

    Record accepted output, waste and unresolved differences.

  5. 5. Reconcile charges

    Match processing bills and close only the settled material balance.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Dispatch coordinator

Counts and identifies the work sent to the finisher and supplies the released instruction.

Packaging quality inspector

Reviews returned print and finish against the job standard before the quantity is made available for the next operation.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Foil or laminate does not match

Hold the affected quantity with the observed defect and the instruction supplied; receipt alone is not acceptance.

Contractor returns a short count

Keep the difference against the original dispatch until agreed spoilage, further delivery or a claim resolves it.

Jobs combined in one shipment

Retain separate counts and artwork references for each customer's work so returns cannot be allocated to the wrong box order.

Can this work independently?

This can track outside processing with entered dispatch and receipt records. Stock and accounting connections reconcile material ownership and processing charges; quality control decides acceptance. A vendor's completion message is not a physical return or proof that the returned output meets specification.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Vendor bills: Supplier invoice lines and authorised posting status.
  • Purchase returns: Approved supplier-return quantities and adjustment references.

Configure, test and introduce the workflow.

  • We list the outside processes you use and the vendors for each. You describe how notes and returns are handled today. A flow diagram comes back for your approval.
  • Rates, process names and wastage allowances are entered. You confirm them with the production team. Material currently lying outside is loaded from your registers. The store team checks balances with the vendors. Mistakes surface early.
  • New outward notes are made on the screen while the old book continues. Returns are booked and compared. The team is trained. The paper book is retired. The oldest balances are reviewed at the next meeting.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • A job record shows usable work returned and quantity still held by the finisher as separate figures.
  • Rejected finishing remains unavailable for packing while the contractor's rework decision is open.
  • The receiving team can retrieve the exact artwork and finish instruction supplied with the dispatched sheets.
Packaging manufacturers

How the business operates.

Your customers are pharma, food, electronics and e-commerce companies. They reorder the same box every month and expect it by Thursday, and Thursday means Thursday to them.

Box costing calculator

Estimates take size, quantity and paper at today’s rate, not last month’s. A calculator for sheet size and paper weight from ply, GSM and BF is custom work layered on the estimate.

Customer specification library

Keep every approved box and carton with its specification, artwork, die number and last price, ready for the repeat order that arrives at four on a Friday.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer box or carton specification and revision
  • Paper grade, GSM, reel width and receipt weight
  • Job card, artwork, die or printing-block reference
  • Stage quantities, trim, make-ready sheets and rejected board

Operational bottlenecks to check

Quotes lag behind kraft prices

Paper rates move, and old quotes stay alive for repeat orders, so you keep supplying at a price that stopped working months ago. Margin quietly disappears.

Reel stock by GSM and deckle is unclear

The register shows weight but not which deckle, GSM and BF are available for tomorrow morning’s job, so a reel is cut that should not have been. Stock looks fine on paper.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Cost the specification

    Record dimensions, material construction and customer requirements. Retain the material-rate basis used for the quotation.

  2. 2. Approve the production documents

    Link the accepted order to the approved specification, artwork and required tooling. Keep later revisions identifiable.

  3. 3. Issue and convert material

    Issue reels or sheets to the job and record movement through the applicable corrugation, printing, cutting and finishing stages.

  4. 4. Check finished packs

    Record finished quantity and the checks specified by quality. Separate rework and rejected stock from accepted bundles.

  5. 5. Dispatch and close the job

    Reconcile accepted bundles, deliveries, remaining material and recorded waste. Link repeat orders to the retained specification instead of an unverified copy.

Industry reports to connect with

  • Quoted versus issued material by job
  • Trim, make-ready and rejection by stage
  • Reel availability by grade and width
  • Customer call-offs, deliveries and receivables

Questions before implementation.

When should packaging manufacturers consider job work management?

Use when your materials leave for processing and must be reconciled on return. A production stage is subcontracted with material supplied by your business.

What should we bring to the requirements discussion?

Bring anonymised examples of Packaging job and customer box code with artwork and finishing revision.; Quantity sent in sheets or cartons, contractor details and agreed process instruction.; Return terms covering usable quantity, spoilage, rejected work and material remaining outside. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track material sent to an outside processor and returned after work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This concerns outsourced physical processing, not general professional-services subcontracting.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. A job record shows usable work returned and quantity still held by the finisher as separate figures. Use this check when reviewing the first working version.

Talk to us

Discuss job work management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements