Skip to main content
GullySystem
Manufacturing

Estimate/Quotation Management for PCB assembly companies

Keep itemised estimates and their approved revisions together.

Finance & Accounting

Does this function belong in your operation?

Use when scope and prices are agreed before an order.

A buyer asks for pricing before confirming work.

A quote prices components at the quantity break, then adds stencil, programming, placement per point and test. Free-issue parts from the customer are marked. A new build quantity reprices at once.

Bring the records the workflow depends on.

  • Items and units
  • Rates and tax settings
  • Approval terms

Outputs to check

  • Versioned estimate document
  • Approval and acceptance history
  • Accepted billing or order input

Follow the estimate/quotation management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Record the requirement

    Capture scope, quantities and the customer's requested terms.

  2. 2. Prepare the estimate

    Use approved units, rates and tax settings.

  3. 3. Review exceptions

    Approve discounts, exclusions and nonstandard terms.

  4. 4. Issue and revise

    Retain the version sent and each subsequent change.

  5. 5. Record acceptance

    Link the agreed version to order creation or final billing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Sales executive

Sees quotes waiting to be sent, quotes waiting on the client, and today’s follow-up list.

Estimator

Builds the costing behind the quote from measurements, material and labour, and keeps it beside the drawing.

Owner

Sees what went out this week, at what margin, and which discounts were given without being asked for.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Customer changes quantity

Save a revision and recalculate affected lines before acceptance.

Expired validity

Require the price and terms to be reviewed before using the estimate.

Discount beyond authority

Hold the revision for approval and retain the original proposed amount.

Can this work independently?

An estimate can be prepared independently from entered items and rates. Item catalogues, pricing and tax settings improve consistency when connected. Order creation and invoicing are downstream processes; acceptance should preserve the agreed version rather than overwrite the estimate with later rates.

Systems and records it connects with

  • Lead management: Enquiry sources, owners and qualification decisions.
  • Proforma invoice: Provisional supply amounts and related advance requests.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Price lists and schemes: Effective-dated rates and customer eligibility rules.

Configure, test and introduce the workflow.

  • We read quotations you sent recently. You pass over the rate list and a few finished quotes, and we sketch the screen layout.
  • Items, units, discount limits and standard terms go in. Proofreading the list is yours. The printed quotation is matched to your letterhead. A draft PDF is sent for your comments.
  • Executives raise real quotes in parallel with the old method. Mismatches are logged and discussed. New enquiries start in the system. Estimators and executives get a short session each.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Earlier revisions remain available.
  • Totals use approved settings.
  • The accepted version is identifiable.
PCB assembly companies

How the business operates.

An assembly job is won or lost on small things. A reel with the wrong resistor value. Solder paste past its jar life. A moisture-sensitive BGA left out of the bake cycle. Each one is cheap to prevent and costly once boards are reflowed, tested and packed for a customer who expects them on Friday.

Bill of materials with approved alternates

Hold the customer’s list with reference designators, approved alternate parts and quantity per board, and flag substitutions that were not approved.

Reel and component lot register

Record the supplier, lot and date code of each reel received, and link the reel to the assembly lot that used it.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and quotations. Price an assembly from bill of materials cost, stencil, feeder setup, line time, test and assumed first-pass yield, and keep every revision of the quote for the next repeat order.
  • Board BOMs and alternate parts. Hold reference designators, quantity per board, approved alternates and revision letter, and flag a substitution that the customer has not approved before the kit is pulled.
  • Component purchase and receipt. Raise orders for shortages, record reels received with supplier lot, date code and moisture class, and send sensitive parts to the bake oven before they reach a shelf.
  • Reel and lot traceability. Link each reel to the assembly lot that consumed it, so a field return leads to the exact supplier lots and date codes on that board.

Operational bottlenecks to check

Reels are not tied to the boards

A reel of 10 kilo-ohm resistors is loaded on feeder 14 with no lot number noted. When a board comes back dead from a customer, the paper trail stops at the feeder bank.

Paste and stencils are managed by feel

Solder paste has a shelf life and an open-jar life, and every stencil has a print count, yet neither is logged against the lot that used it. Squeegee wear goes unseen.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    The customer’s bill of materials is loaded and priced with component cost, stencil, line time and test. Alternates are flagged for the customer’s approval before the quote goes out.

  2. 2. Purchase and receipt

    Missing parts are ordered. Reels are received with supplier lot, date code and moisture sensitivity level, and sensitive devices go to the bake queue before they reach a shelf or a feeder.

  3. 3. Kitting

    A job kit is counted against the bill of materials, line by line, and shortages are listed by reference designator. The job is released only when the kit is complete or the customer approves it short.

  4. 4. Print, place and reflow

    The stencil, paste jar, feeder setup, placement program and reflow profile are recorded for the lot. Boards pass solder paste inspection before placement. Automated optical inspection checks them again after the oven.

  5. 5. Through-hole, test and rework

    Hand-inserted and wave-soldered parts are logged against the lot. In-circuit and functional tests record results by board serial, and failures go to the rework bench with a record of the fault.

  6. 6. Pack and deliver

    Shipping paperwork states boards built, scrapped and shipped, and names the reel lots consumed. The certificate of conformance is printed from the same lot. Nothing is retyped.

Industry reports to connect with

  • Kits short, by job and part
  • First-pass yield by board type and line
  • Reels consumed by assembly lot
  • Paste jars and stencils nearing limits

Questions before implementation.

When should pcb assembly companies consider estimate/quotation management?

Use when scope and prices are agreed before an order. A buyer asks for pricing before confirming work.

What should we bring to the requirements discussion?

Bring anonymised examples of Items and units; Rates and tax settings; Approval terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Keep itemised estimates and their approved revisions together. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

An estimate is not a tax invoice or proof of acceptance.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Earlier revisions remain available. Use this check when reviewing the first working version.

Talk to us

Discuss estimate/quotation management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements