Skip to main content
GullySystem
Manufacturing

Estimate/Quotation Management for Plastic extrusion companies

Keep itemised estimates and their approved revisions together.

Finance & Accounting

Does this function belong in your operation?

Use when scope and prices are agreed before an order.

A buyer asks for pricing before confirming work.

A quote for 110 mm pressure pipe starts from kilograms per metre, line output and compound price. Distributors ask for profile sections by cut length. Colour change cost appears as its own line.

Bring the records the workflow depends on.

  • Items and units
  • Rates and tax settings
  • Approval terms

Outputs to check

  • Versioned estimate document
  • Approval and acceptance history
  • Accepted billing or order input

Follow the estimate/quotation management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Record the requirement

    Capture scope, quantities and the customer's requested terms.

  2. 2. Prepare the estimate

    Use approved units, rates and tax settings.

  3. 3. Review exceptions

    Approve discounts, exclusions and nonstandard terms.

  4. 4. Issue and revise

    Retain the version sent and each subsequent change.

  5. 5. Record acceptance

    Link the agreed version to order creation or final billing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Sales executive

Sees quotes waiting to be sent, quotes waiting on the client, and today’s follow-up list.

Estimator

Builds the costing behind the quote from measurements, material and labour, and keeps it beside the drawing.

Owner

Sees what went out this week, at what margin, and which discounts were given without being asked for.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Customer changes quantity

Save a revision and recalculate affected lines before acceptance.

Expired validity

Require the price and terms to be reviewed before using the estimate.

Discount beyond authority

Hold the revision for approval and retain the original proposed amount.

Can this work independently?

An estimate can be prepared independently from entered items and rates. Item catalogues, pricing and tax settings improve consistency when connected. Order creation and invoicing are downstream processes; acceptance should preserve the agreed version rather than overwrite the estimate with later rates.

Systems and records it connects with

  • Lead management: Enquiry sources, owners and qualification decisions.
  • Proforma invoice: Provisional supply amounts and related advance requests.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Price lists and schemes: Effective-dated rates and customer eligibility rules.

Configure, test and introduce the workflow.

  • We read quotations you sent recently. You pass over the rate list and a few finished quotes, and we sketch the screen layout.
  • Items, units, discount limits and standard terms go in. Proofreading the list is yours. The printed quotation is matched to your letterhead. A draft PDF is sent for your comments.
  • Executives raise real quotes in parallel with the old method. Mismatches are logged and discussed. New enquiries start in the system. Estimators and executives get a short session each.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Earlier revisions remain available.
  • Totals use approved settings.
  • The accepted version is identifiable.
Plastic extrusion companies

How the business operates.

An extrusion line rarely stops. The die, haul-off and cutter are set once, and then metres pour through the sizing sleeve and spray tank for hours while nobody touches a dial. Thin walls pile up as scrap before anyone looks.

Profile and pipe register

Store each pipe or profile with its die number, nominal diameter, SDR (the ratio of diameter to wall), tolerance band and ordered cut lengths. A repeat order starts from known figures.

Line run log

Capture screw speed, barrel zone temperatures, melt pressure, haul-off speed, kilograms per hour and metres produced for each run on each line, with the operator’s name on the shift.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Extrusion quotations. Price pipe, profile or sheet from weight per metre, screw output, resin and masterbatch cost and cut-to-length sawing, and keep every revision beside the accepted figure.
  • Section and die register. Hold each section’s wall, outside diameter, tolerance and die, with weight per metre and the cut lengths each buyer orders. A 32 mm conduit and a 110 mm drain pipe each keep their own sheet.
  • Line run log. Record screw speed, barrel zone temperatures, melt pressure, haul-off speed and metres per run, then set kilograms per hour against the quoted rate.
  • Compound recipes and stock. Store each blend of resin, stabiliser, filler and colour, receive lots with their test certificates, and draw them down against runs. Low stock is flagged per line.

Operational bottlenecks to check

Start-up scrap is never costed

Each colour change and die change burns compound before the first good metre leaves the saw. Purge, die-lip drool and trimmed ends go to the regrind bin unweighed. So the yield you quoted and the yield you achieved drift apart, and the loss slides quietly into the next job’s price.

Dimensions are measured and then lost

Wall thickness, outside diameter and ovality are read at the tank and noted on a clipboard, and the sheet is filed by date, not by order. When a buyer queries one bundle three weeks later, nobody can find the readings taken at that hour.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    The enquiry names a pipe size and pressure class, a profile section or a sheet gauge, with the cut length and metres wanted. The quote uses weight per metre, line output and compound cost, and every revision is kept.

  2. 2. Die and trial

    The die comes from the tool store or is made new. A start-up trial records zone temperatures, scrap and measured wall before the run is cleared for the buyer.

  3. 3. Line planning

    The planner picks a line by size range and screw output, places colour changes so the lightest shade runs first, and checks resin, masterbatch and regrind for the whole run.

  4. 4. Running

    The operator logs barrel temperatures, screw speed, haul-off speed and metres, with wall and diameter checks entered as the pipe leaves the sizing tank. Trim goes to the grinder.

  5. 5. Cutting and bundling

    Lengths are cut at the planetary saw to order and counted into bundles. Tags print section, length, count and order number.

  6. 6. Dispatch

    The delivery note lists bundles and metres, and the invoice follows from it. The die goes back to the tool store with its new metre count and a note on its condition.

Industry reports to connect with

  • Line output in kilograms per hour against the quoted rate
  • Scrap and purge by cause, line and colour
  • Compound, masterbatch and regrind consumed per order
  • Dies ranked by metres since polishing

Questions before implementation.

When should plastic extrusion companies consider estimate/quotation management?

Use when scope and prices are agreed before an order. A buyer asks for pricing before confirming work.

What should we bring to the requirements discussion?

Bring anonymised examples of Items and units; Rates and tax settings; Approval terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Keep itemised estimates and their approved revisions together. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

An estimate is not a tax invoice or proof of acceptance.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Earlier revisions remain available. Use this check when reviewing the first working version.

Talk to us

Discuss estimate/quotation management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements