Skip to main content
GullySystem
Manufacturing

Bill of Materials for Plastic packaging manufacturers

Define the materials and quantities needed for a manufactured item.

Manufacturing

Does this function belong in your operation?

Use when output quantities depend on a repeatable material or component list.

A product or production recipe is created or revised.

A pouch structure of printed PET, adhesive and polyethylene sealant is listed layer by layer with its micron and gram weight. Planners work out reels to draw. Ink and adhesive use feeds the cost.

Bring the records the workflow depends on.

  • Finished-item codes
  • Component quantities and units
  • Revision and waste rules

Outputs to check

  • Approved material and subassembly list
  • Versioned material cost basis
  • Quantity-exploded requirement sheet

Follow the bill of materials workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define the output

    Identify the finished item, production quantity and unit.

  2. 2. List components

    Record materials, subassemblies and quantity conversions.

  3. 3. Review allowances

    Approve waste factors and permitted substitutes.

  4. 4. Release a version

    Retain the approved definition and its effective use.

  5. 5. Calculate requirements

    Expand the selected version for a planned quantity and pass shortages to planning or purchasing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Estimator

Defines the material quantities and approved version used to cost a finished item or quotation.

Production in-charge

Sees what a job needs before it is released to the floor.

Storekeeper

Issues against the list. Anything beyond it is asked for in writing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Component unavailable

Use only an approved substitute and retain its effect on cost and specification.

Design revised after release

Keep existing jobs on their approved version unless a controlled change is authorised.

Unit conversion inconsistent

Resolve the conversion before calculating requirements or issuing material.

Can this work independently?

A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.

Systems and records it connects with

  • Production planning: Demand, planned quantities and resource or material constraints.
  • Work orders: Released production jobs, material issues and output records.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Stock: Item-location quantities and authorised stock movements.

Configure, test and introduce the workflow.

  • You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
  • You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
  • The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Component units are consistent.
  • Production uses the approved version.
  • Revisions preserve the earlier material definition.
Plastic packaging manufacturers

How the business operates.

A stand-up pouch is built in layers. Film is blown, reverse printed, laminated to a cast polypropylene sealant web and slit to width before a bag machine sees it. Every step leaves a narrower reel.

Film structure and recipe

Store layers, micron, web width, adhesive type and coat weight for each pouch, with the resin grade, masterbatch and ink series it needs.

Artwork and cylinder register

Hold artwork revision, approval date, flexo plates or gravure cylinders, their owner, and the impressions run against each, with the barcode checked per revision.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Pouch quotations. Convert a pouch size and quantity into film metres, kilograms, ink and adhesive, then price with the expected scrap of each stage.
  • Film structure and recipe. Keep every layer’s polymer, micron and web width beside the adhesive, ink and sealant it takes, so a repeat order begins from an identical build.
  • Artwork approvals. Log artwork revisions, proof approvals and the customer’s signed Pantone match, and stop a run if the approved revision differs from the cylinder.
  • Cylinder and plate register. Hold each gravure cylinder or flexo plate with owner, rack position, impressions run and the artwork revision it was made from.

Operational bottlenecks to check

Waste is lost between stages

Each machine reports its own scrap. Nobody adds extruder trim, press start-up film, laminator mismatch and slitter edge together, so the plant never learns the kilograms of resin bought to deliver one finished pouch order.

Reels lose their identity

A printed reel is slit into narrower child reels that go to different laminators and bag machines, and nobody writes down which went where. Numbers sit on masking tape. It peels.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Specification and quote

    The brand owner’s pouch size, gusset, zipper and film structure are recorded together with the colour count. The quotation converts pouches into film metres and kilograms.

  2. 2. Artwork and cylinders

    Artwork revisions are logged and the proof is approved. Cylinders or flexo plates are then made and entered with their owner and rack location.

  3. 3. Extrusion and print

    Base film reels are numbered and weighed. Corona treatment is checked, and print runs record the Pantone match approval and the waste at start-up.

  4. 4. Lamination and slitting

    Printed reels are laminated to the sealant film with solventless or solvent adhesive and slit to width. Each child reel is numbered under its mother reel.

  5. 5. Conversion

    Pouch and bag machines make the finished goods. Counts, bottom seal checks and rejects are logged by reel.

  6. 6. Packing and delivery

    Pouches are counted into cartons and pallets. Labels and delivery notes carry the film lot.

Industry reports to connect with

  • Total scrap per order, split by stage
  • Reel genealogy from film lot to carton
  • Artwork proofs awaiting approval
  • Cylinders by owner, rack position and impressions

Questions before implementation.

When should plastic packaging manufacturers consider bill of materials?

Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.

What should we bring to the requirements discussion?

Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.

Talk to us

Discuss bill of materials for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements