Skip to main content
GullySystem
Home services

Stock Tracking and Alerts for Plumbing contractors

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Elbows, unions, solvent cement, Teflon tape and ball valves have reorder levels in the godown. A shortage of half-inch fittings is seen before a gang is idle. Issues are booked by site.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Plumbing contractors

How the business operates.

Most of the work is invisible within a week, behind tiles, plaster and a false ceiling. If something weeps two years later, the only argument you have is the record you made before it was covered.

Point and fixture quotation

Quote by bathroom as a bill of quantities, with points, pipe length and fixtures, from your own pipe, fitting and labour rates.

Fittings issue per site

Record pipes and fittings issued to each job and returned, so a hundred elbows do not vanish between two towers.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and site visits. Log every enquiry with its source and address. Schedule the site visit, and keep the measurements and photographs of the bathroom, kitchen or riser with the client so nobody measures twice.
  • Quotations and rate lists. Build quotations and estimates from your own CPVC, UPVC, PPR and labour rates, item by item as a bill of quantities, with every revision kept and open quotations in one list.
  • Service calls and job tickets. Raise a ticket for each complaint, dispatch a plumber, record the visit and bill the repair, from a dripping tap to a choked soil pipe or a failed float valve. Nothing goes missing.
  • Plumbing jobs and work orders. Run each building or flat as a job with its stages, plumbers, material and schedule, from sleeve fixing and chasing through first fix to final fix. Each stage shows what is left.

Operational bottlenecks to check

There is no proof of the test

Tiles go on, a leak shows, and the builder says it was never tested. The photo is somewhere in a chat from March. The claim is yours to disprove.

Fittings are over-ordered and lost

Elbows, tees and angle valves are bought in bulk, but their quantities are not allocated to each site. Purchases repeat unchecked.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry

    A burst-pipe complaint or a site enquiry arrives by phone, WhatsApp or a walk-in. It is logged under the client’s name and the site address, with the kind of work asked for and who took the call.

  2. 2. Site visit and quotation

    The supervisor visits and takes measurements, noting the risers, traps, valves and sanitaryware needed. A quotation is built from the rate list. The client accepts, negotiates or drops it, and the outcome is kept.

  3. 3. Job and plumbers

    An accepted quotation becomes a job. Plumbers and helpers are assigned to it, and a service call goes to the technician who covers that locality, with the address and complaint on their phone.

  4. 4. Work and material

    Pipes, fittings and sanitaryware are issued from the store to the job. Each stage is recorded, from sleeves and chasing to first fix, and hydrostatic pressure tests are noted against the line that was tested.

  5. 5. Billing

    Measurements turn into a running account bill or a final invoice, with sales tax or VAT where it applies. Receipts are posted against the bill as they arrive.

  6. 6. Follow-up

    Snags are closed. The handover is recorded. Clients on a maintenance contract are called before it renews, so the overhead tank and pump visits continue without a gap.

Industry reports to connect with

  • Quotations open, won and lost, by builder
  • Service calls by status, locality and plumber
  • Pipe, fitting and sanitaryware issued against each job
  • Running bills raised, retention held and amounts received

Questions before implementation.

When should plumbing contractors consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements