Skip to main content
GullySystem
Home services

Work Order Management for Plumbing contractors

Track a production job from material issue to completed output.

Manufacturing

Does this function belong in your operation?

Use when physical production needs a job-level record of materials and output.

A production plan releases a specific job.

Each floor or bathroom block is issued as a job with its points, fittings and gang. Supervisors see what is pending. Pressure tests are signed off before the walls are closed.

Bring the records the workflow depends on.

  • Required output
  • Approved material list
  • Process steps and due dates

Outputs to check

  • Released production-job record
  • Material and output reconciliation
  • Work-in-progress and variance list

Follow the work order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Release the job

    Record output quantity, instructions and the approved material version.

  2. 2. Issue resources

    Link materials and assigned production stages to the work order.

  3. 3. Record progress

    Capture completed operations, interruptions and additional material requests.

  4. 4. Inspect output

    Pass the produced quantity to the agreed quality or acceptance check.

  5. 5. Close the job

    Reconcile accepted output, scrap, unused material and unfinished quantities.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Production in-charge

Releases jobs, moves them between stages, and holds the ones waiting on material with a reason typed in.

Supervisor

Marks the stage done from a tablet near the machine.

Storekeeper

Issues material against the job number and sees what is still due to it.

Owner

Looks at what is late, and at what is late for the same reason every week.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Material issued beyond plan

Record the reason and obtain the required approval.

Output below target

Keep the uncompleted balance or close it with an authorised shortfall reason.

Job paused mid-process

Retain work-in-progress quantities and the stage from which work will resume.

Can this work independently?

A work order needs an output definition and process instructions. It can use entered materials and progress, but bill-of-materials, stock and quality links make execution traceable. Sales orders provide demand; closing production is not the same as dispatching or invoicing the finished goods.

Systems and records it connects with

  • Bill of materials: Approved component quantities and production-definition versions.
  • Production planning: Demand, planned quantities and resource or material constraints.
  • Stock: Item-location quantities and authorised stock movements.
  • Job work delivery notes: Material dispatch and return references for outside processing.

Configure, test and introduce the workflow.

  • Tell us the stages a job passes through, in your words. A stage list comes back to confirm.
  • Sales orders are connected, and so is the bill of materials. A sample work order draws on each. A screen shows jobs by stage. The supervisor tries it beside the whiteboard.
  • Supervisors and the store use live work orders. The whiteboard is retired after a trial period.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Output links to its work order.
  • Material usage is traceable.
  • Unfinished quantities remain visible.
Plumbing contractors

How the business operates.

Most of the work is invisible within a week, behind tiles, plaster and a false ceiling. If something weeps two years later, the only argument you have is the record you made before it was covered.

Point and fixture quotation

Quote by bathroom as a bill of quantities, with points, pipe length and fixtures, from your own pipe, fitting and labour rates.

Fittings issue per site

Record pipes and fittings issued to each job and returned, so a hundred elbows do not vanish between two towers.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and site visits. Log every enquiry with its source and address. Schedule the site visit, and keep the measurements and photographs of the bathroom, kitchen or riser with the client so nobody measures twice.
  • Quotations and rate lists. Build quotations and estimates from your own CPVC, UPVC, PPR and labour rates, item by item as a bill of quantities, with every revision kept and open quotations in one list.
  • Service calls and job tickets. Raise a ticket for each complaint, dispatch a plumber, record the visit and bill the repair, from a dripping tap to a choked soil pipe or a failed float valve. Nothing goes missing.
  • Plumbing jobs and work orders. Run each building or flat as a job with its stages, plumbers, material and schedule, from sleeve fixing and chasing through first fix to final fix. Each stage shows what is left.

Operational bottlenecks to check

There is no proof of the test

Tiles go on, a leak shows, and the builder says it was never tested. The photo is somewhere in a chat from March. The claim is yours to disprove.

Fittings are over-ordered and lost

Elbows, tees and angle valves are bought in bulk, but their quantities are not allocated to each site. Purchases repeat unchecked.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry

    A burst-pipe complaint or a site enquiry arrives by phone, WhatsApp or a walk-in. It is logged under the client’s name and the site address, with the kind of work asked for and who took the call.

  2. 2. Site visit and quotation

    The supervisor visits and takes measurements, noting the risers, traps, valves and sanitaryware needed. A quotation is built from the rate list. The client accepts, negotiates or drops it, and the outcome is kept.

  3. 3. Job and plumbers

    An accepted quotation becomes a job. Plumbers and helpers are assigned to it, and a service call goes to the technician who covers that locality, with the address and complaint on their phone.

  4. 4. Work and material

    Pipes, fittings and sanitaryware are issued from the store to the job. Each stage is recorded, from sleeves and chasing to first fix, and hydrostatic pressure tests are noted against the line that was tested.

  5. 5. Billing

    Measurements turn into a running account bill or a final invoice, with sales tax or VAT where it applies. Receipts are posted against the bill as they arrive.

  6. 6. Follow-up

    Snags are closed. The handover is recorded. Clients on a maintenance contract are called before it renews, so the overhead tank and pump visits continue without a gap.

Industry reports to connect with

  • Quotations open, won and lost, by builder
  • Service calls by status, locality and plumber
  • Pipe, fitting and sanitaryware issued against each job
  • Running bills raised, retention held and amounts received

Questions before implementation.

When should plumbing contractors consider work order management?

Use when physical production needs a job-level record of materials and output. A production plan releases a specific job.

What should we bring to the requirements discussion?

Bring anonymised examples of Required output; Approved material list; Process steps and due dates. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track a production job from material issue to completed output. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This is a production work order; field repairs and customer visits belong in job cards.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Output links to its work order. Use this check when reviewing the first working version.

Talk to us

Discuss work order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements