Skip to main content
GullySystem
Automotive

Stock Tracking and Alerts for PPF installation centres

Track film rolls or kits, panel-job issues, usable offcuts and rejected material.

Inventory Management

Does this function belong in your operation?

Use when the centre holds film rolls, kits or reusable offcuts that need job-linked control.

Film is received, allocated, cut, issued, returned or counted for PPF work.

A roll can have remaining length but no usable piece for the next accepted panel. PPF control needs the actual film identity and usable-remnant record as well as the quantity balance.

Bring the records the workflow depends on.

  • Film product, roll or kit identity and relevant batch reference
  • Locations, opening quantities and consistent issue units
  • Accepted panel requirements and material reservations
  • Cut records, usable-remnant dimensions and loss evidence

Outputs to check

  • Roll, kit and usable-remnant register
  • Panel-job material movement history
  • Shortage, rejection and reconciliation list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define film identities and units

    Separate products, rolls and supplied kits under the centre’s tracking method. Decide how remaining rolls and usable offcuts are identified and measured.

  2. 2. Receive and hold discrepancies

    Match product and quantity to the supplier record. Keep damaged or unidentified material separate from stock cleared for allocation.

  3. 3. Reserve against panel work

    Check the accepted film and coverage. Use the relevant dimensions or usability evidence when reserving a remnant; a positive total alone is insufficient.

  4. 4. Record cuts, issues and returns

    Link material movements to the vehicle and panels. Identify reusable offcuts separately from waste, rejected cuts and additional material consumed for rework.

  5. 5. Reconcile the physical film

    Compare rolls, kits and remnants with recorded balances. Investigate differences and authorise adjustments before treating shortages as a purchasing requirement.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Film custodian

Records receipt identity, location, reservations and held material.

Cutting operator or installer

Reports actual cuts, issues, usable returns and rejected material against the panel job.

Stock reviewer

Reconciles physical film and authorises evidenced count corrections.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Remaining roll cannot supply the required shape

Retain the real balance and review another suitable allocation instead of reserving unusable material.

Cut is rejected before fitting

Record the loss and reason, then link any replacement issue to the same panel job.

Product or batch identity is uncertain

Hold the material for verification rather than copying a neighbouring roll’s identity.

Can this work independently?

Stock can use manually entered film movements without pattern software. A pattern reference can support the cut record through an agreed handoff, but it does not prove physical consumption or actual remnant size.

Systems and records it connects with

  • Coverage and job records: accepted film and panel demand.
  • Cutting records: actual issue and returned-remnant evidence where available.
  • Supplier records: deliveries and product discrepancies through an agreed reference handoff.

Configure, test and introduce the workflow.

  • Review a complete roll and its associated cuts. Define identity, issue units, remnant measurements and loss reasons with the custodian.
  • Trial an unusable remnant, rejected cut and uncertain product reference. Confirm usable availability excludes unresolved material.
  • Count rolls, kits and reusable offcuts against open reservations before use. Assign responsibility for each movement and adjustment.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • A panel reservation identifies the intended film and usable material.
  • Offcuts retain the information needed for a later usability review.
  • Cut losses and rework issues remain traceable to their original job and reason.
PPF installation centres

How the business operates.

Two PPF quotations can name the same car and still cover different panels. The installation centre needs an accepted coverage list before film is allocated or a pattern is selected. Track the actual film, roll or kit, panel work and installer handoffs through final inspection. Paint protection film is a physical material fitted to the agreed surfaces; this workflow centres on automotive painted panels. It records the specialist’s decisions without prescribing cutting or fitting methods, promising damage protection or assuming manufacturer authorisation.

Coverage and intake desk

Identify the vehicle variant and requested panels. Retain condition photographs, existing film or treatment questions and the chosen product. Describe boundaries and exclusions in the accepted scope rather than relying on an undefined package name.

Film stores and cutting preparation

Reserve the identified film or supplied kit against the job. Where pattern software is actually used, retain the selected vehicle and panel reference. Record material issued, cuts, usable offcuts and losses using consistent units.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Vehicle specification, intake condition and existing film or surface-treatment findings
  • Accepted panel-coverage list, boundaries, exclusions and selected film
  • Quotation revisions and customer decisions on added or changed coverage
  • Film product, roll or kit identifier, unit and relevant batch reference

Operational bottlenecks to check

A package name hides missing panels

Make the accepted coverage list the instruction for both cutting and inspection. An excluded area stays identifiable when the customer later asks what was installed.

Roll totals hide an unusable remnant

A remaining length does not establish that a piece suits the next panel. Keep dimensions or the studio’s accepted usability record alongside the material identity and reservation.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Inspect and define coverage

    Record the exact vehicle and requested panels with intake condition. The specialist assesses suitability and existing treatments. Keep any unresolved surface question visible before accepting the final installation scope.

  2. 2. Agree the film and panel list

    Quote the actual product and included panels, with boundaries and exclusions the customer can review. Preserve alternatives and record the selected version. An added panel needs a revised decision.

  3. 3. Prepare the material and cutting record

    Confirm the roll or kit and its usable quantity. If pattern software is used, identify the relevant vehicle and panel reference. A stored pattern name is not proof of fit; the responsible operator checks it.

  4. 4. Record panel work and material use

    Link each installation handoff to the panel and product. Record cuts, issued material and usable returns. Unexpected surface findings or a changed coverage request return for assessment before affected work continues.

  5. 5. Inspect and handle rework

    Compare installed panels with the accepted list and record edge, finish or other inspection findings. Keep rejected material and replacement work linked to the original panel instead of erasing the first attempt.

  6. 6. Release and hand over

    Retain the responsible release decision, care document and customer acknowledgement. Keep any manufacturer-registration response distinct from job completion. Later concerns use the original panel, material and inspection evidence.

Industry reports to connect with

  • Quotes and jobs with unsettled panel-coverage decisions
  • Film and kit reservations against accepted work
  • Material issued, usable offcuts and losses by roll and job
  • Panel progress, inspection holds and rework references

Questions before implementation.

When should ppf installation centres consider stock tracking and alerts?

Use when the centre holds film rolls, kits or reusable offcuts that need job-linked control. Film is received, allocated, cut, issued, returned or counted for PPF work.

What should we bring to the requirements discussion?

Bring anonymised examples of Film product, roll or kit identity and relevant batch reference; Locations, opening quantities and consistent issue units; Accepted panel requirements and material reservations; Cut records, usable-remnant dimensions and loss evidence. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track film rolls or kits, panel-job issues, usable offcuts and rejected material. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The ledger records material. Cutting geometry, film handling, storage conditions and suitability remain with responsible staff and applicable product guidance.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. A panel reservation identifies the intended film and usable material. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements