Skip to main content
GullySystem
Manufacturing

Batch and Serial Tracking for Specialty chemical manufacturers

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

A batch links to its raw material lots, reactor, trial origin and the shipments it fed. A customer’s complaint about a coating additive leads back to the lot. Recall lists take minutes.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Specialty chemical manufacturers

How the business operates.

Specialty chemicals are sold on what they do. One buyer wants a dispersant that keeps a pigment from settling. Another wants an additive that shortens a cure. The recipe behind that behaviour is the company’s real asset. Lose it and the product is gone.

Laboratory trials and formulations

Record each trial with its recipe, test results and customer feedback, and promote the approved one to a formulation version.

Scale-up and pilot batches

Link a trial to its pilot batch and then to every production batch that follows it, and compare viscosity, solids and performance results at each scale so that a drift appears early.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer enquiries and requirements. Log each enquiry with target properties, the end application and the customer’s own acceptance tests.
  • Laboratory trial register. Record trial recipes, bench results and customer feedback, then compare variants side by side. Nothing stays in a notebook.
  • Formulation versions. Hold approved recipes with revision history, an owner and the date each customer approved them.
  • Scale-up and pilot batches. Link a trial to its pilot and production batches, and compare yield, solids and viscosity across the bench, pilot and plant scales.

Operational bottlenecks to check

Trials and production recipes are disconnected

A chemist’s notebook holds the winning variant. The production master record is retyped by a supervisor, and a transcription slip changes the product.

Raw material variation passes unseen

A surfactant lot arrives from a new supplier. Its activity is slightly different. Nobody notes it.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry

    A customer problem is logged. It states the target properties, the application test the customer will run, and the contact who will judge the sample.

  2. 2. Laboratory trials

    Each trial variant is recorded with its recipe, bench viscosity and pH readings, and the customer’s feedback on the sample is attached beside them.

  3. 3. Approval and scale-up

    The approved trial becomes a numbered formulation version. A pilot batch comes first, and only then does the recipe move to full production.

  4. 4. Production

    The master batch record is followed step by step at the kettle. Raw lots, charge order, reaction temperatures, agitator hold times and in-process samples are written as they happen.

  5. 5. Release

    Viscosity, pH, solids, moisture by Karl Fischer and the customer’s own parameters are tested against the limits. The lot is released or held.

  6. 6. Shipment

    The certificate of analysis and the current data sheet are printed. The lot is then filled to pails, drums or IBCs and labelled with the batch number and hazard pictograms.

Industry reports to connect with

  • Trials open and their customer feedback
  • Formulation versions and approval dates
  • Pilot and production batches by product
  • Batches held or released by test result

Questions before implementation.

When should specialty chemical manufacturers consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements