Skip to main content
GullySystem
Logistics

Credit Limits and Control for Steel traders

Review steel supply commitments against current customer exposure without concealing quantity disputes or unbilled loads.

Sales and Distribution

Does this function belong in your operation?

Use when a trader extends customer credit across repeat steel orders, partial loads and material prepared before final billing.

A customer requests credit supply or an existing balance, release condition or approved limit changes.

A fabricator’s repeat orders, delivered but unbilled loads and disputed weight adjustments can obscure credit exposure. Agree which records count, reconcile them with the ledger and review the next release against that basis. Keep the commercial approver’s exception with its reason and affected order. A pending cheque or proposed shortage credit does not establish cleared funds, and a release decision does not establish material suitability.

Bring the records the workflow depends on.

  • Identified debtor and authorised purchasing contacts
  • Agreed limits, terms and exposure calculation
  • Invoices, open orders and included unbilled dispatches
  • Confirmed receipt allocations and authorised credits
  • Disputed weight charges and release-approval records

Outputs to check

  • Customer exposure and unresolved-balance view
  • Held steel-order or load decision list
  • Policy, exception and release audit history

Follow the credit limits and control workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define what counts toward exposure

    Agree the debtor account and whether accepted orders, prepared material or delivered but unbilled loads are included. Keep the rule explicit so the same quantity is not counted again at every stage.

  2. 2. Reconcile current evidence

    Compare the ledger with open supply records, identifying unallocated receipts and unsettled weight differences. Show the source date and missing updates rather than presenting a stale available balance as current.

  3. 3. Assess the proposed commitment

    Review the next order or load against the approved limit and payment terms. A requested rate or cutting instruction does not itself authorise credit, even when material has been provisionally selected.

  4. 4. Authorise a specific release

    Record the decision-maker, reason and affected quantity for an exception. Keep the commercial decision separate from yard identity checks, technical preparation approval and the actual dispatch.

  5. 5. Update the remaining obligation

    Apply verified receipts and issued adjustments under the agreed rule. Reconcile cancelled or fulfilled commitments without deleting an unpaid invoice or treating a proposed shortage allowance as an approved credit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Sales coordinator

Checks the credit decision before making a release commitment and gives finance the actual order and preparation exposure.

Accounts reviewer

Reconciles issued amounts, confirmed receipts and approved adjustments, preserving disputed quantities instead of hiding them in a net balance.

Credit approver

Sets the exposure policy and records a specific exception or hold, keeping customer payment risk separate from physical stock release.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Short-weight credit is still disputed

Keep the claim and original debt visible under the agreed policy until the commercial adjustment is authorised and issued.

Payment covers several loads

Verify the receipt and allocation instructions without arbitrarily closing the oldest or largest balance.

Material has already been cut

Review the prepared-stock commitment and accepted terms before holding further supply; a credit hold does not reverse completed processing.

A buyer also supplies the trader

Maintain separate receivable and payable records, using an offset only when the authorised accounting process confirms it.

Can this work independently?

The review can use reconciled imports or entered balances. Blocking a release requires an enforced order or dispatch connection, or a controlled manual handoff. Supplier payables and customer receivables remain separate even if the same organisation trades both ways; any offset requires an explicit authorised accounting decision.

Systems and records it connects with

  • Orders and preparation records supply the commitments included in the approved exposure rule.
  • Invoices, receipts and credits establish posted customer balances and confirmed allocations.
  • Dispatch and collection records carry the approved release scope and follow-up evidence without equating a promise with payment.

Configure, test and introduce the workflow.

  • Reconcile a repeat buyer’s orders, prepared material, dispatches and invoices to identify duplicate or omitted exposure.
  • Trial a disputed destination weight, a multi-invoice payment and a buyer who is also a supplier, checking each approval boundary.
  • Agree opening balances and release authority with accounts and the yard, retaining a clear manual control wherever system enforcement is not connected.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • The exposure rule avoids counting the same steel supply as both a full open order and an additional invoiced balance.
  • Pending payment evidence and unresolved weight claims remain identifiable.
  • A release exception has a named authority and scope, with separate evidence of actual dispatch.
Steel traders

How the business operates.

The buyer asks for a section by grade and length, but the yard has a bundle recorded only by weight. Resolve that difference before accepting the order. Steel traders buy and sell bars, plates, sections, pipes or coils from their actual range, supplying fabricators, builders, factories and other dealers. The baseline here is stockholding trade with yard receipts and dispatches. Direct mill supply and cut-to-length work require separately agreed scope. A commission-only intermediary does not acquire a stock balance merely by arranging a sale. Material selection and engineering acceptance stay with the people authorised to make those decisions.

Sales and buying desk

Sales records the requested form, grade, dimensions, quantity and delivery basis. Buying checks the actual source and availability. Keep supplier offers and selling commitments separate when rates change before the customer accepts.

Yard receipt and identification

Receiving links the supplied material to its bundle, plate or coil reference where provided. Check the delivered identity and quantity against the purchase instruction; missing markings or documents create a review task rather than an invented certificate.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Product form, grade, finish and dimensions with explicit measurement units
  • Supplier and mill references as actually supplied, with bundle, coil or heat identifiers where available
  • Requested test-document type, received issuer document and linked material reference
  • Stock location, reservation and held-quantity register

Operational bottlenecks to check

A weight balance hides unusable dimensions

Total tonnage does not show whether the available plate or section matches the order. Preserve dimensions and piece identity; a remnant of the right grade is not automatically a substitute for a requested full length.

Documents lose their material link

A test report in a folder does not prove it covers the bundle being loaded. Retain the source reference and request clarification when material markings or supplied documents do not match.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Clarify the steel requirement

    Record form, grade, dimensions and the buyer’s required quantity basis. Capture any requested mill document before supply is accepted. Do not infer that a different grade is suitable from price or availability.

  2. 2. Confirm source and selling basis

    Check whether the line comes from the yard or direct from a supplier. Agree how measured or reference weights affect billing and how additional processing or transport is priced.

  3. 3. Identify and prepare the material

    Reserve identifiable stock and retain supplied traceability references. If cutting is sold, link the accepted instruction to the original stock and resulting pieces; do not claim processing completion from the sales order alone.

  4. 4. Dispatch with quantity evidence

    Record the actual load, item quantities and applicable weighment documents. Keep the agreed receiving destination and any collection authority visible. The buyer’s receipt can reveal a discrepancy that dispatch records did not resolve.

  5. 5. Resolve differences and account for supply

    Compare billing against the accepted basis, not an arbitrary weight chosen after delivery. Keep shortage claims, returned remnants and disputed charges open until the authorised decision and its stock or accounting effects are recorded.

Industry reports to connect with

  • Available and reserved material by form, grade, dimensions and yard location
  • Orders awaiting source confirmation, document review or preparation evidence
  • Loads with unresolved quantity or weighment differences
  • Remnants and held material awaiting an authorised disposition

Questions before implementation.

When should steel traders consider credit limits and control?

Use when a trader extends customer credit across repeat steel orders, partial loads and material prepared before final billing. A customer requests credit supply or an existing balance, release condition or approved limit changes.

What should we bring to the requirements discussion?

Bring anonymised examples of Identified debtor and authorised purchasing contacts; Agreed limits, terms and exposure calculation; Invoices, open orders and included unbilled dispatches; Confirmed receipt allocations and authorised credits; Disputed weight charges and release-approval records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Review steel supply commitments against current customer exposure without concealing quantity disputes or unbilled loads. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Credit control does not establish ability to pay, provide a financing decision or execute debt recovery. It does not decide steel suitability or extinguish an existing supply obligation when a limit changes.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. The exposure rule avoids counting the same steel supply as both a full open order and an additional invoiced balance. Use this check when reviewing the first working version.

Talk to us

Discuss credit limits and control for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements