Skip to main content
GullySystem
Logistics

Business solutions for Textile wholesalers

Explore software for work such as “Maintain fabric references, swatches and accepted lot decisions”. Review each business function below, including when it fits and what to check before implementation.

Textile wholesalers

How the business operates.

A textile wholesaler supplies fabric to trade buyers from identified rolls, pieces or agreed cut lengths. The buyer selects a fabric reference and colour, but the transaction also depends on width, sample reference, shade or lot identity, length units and any need for a continuous piece. Two rolls with enough combined metres do not necessarily satisfy an order for one unbroken length. This scope covers physical fabric distribution, including the commercial control of cut-length orders. It overlaps other wholesalers in receiving, accounts and dispatch, while roll identity and residual length give it a different stock model from finished garments. Weaving, dyeing, finishing, garment manufacture and installation remain separate operations. Goods held for another owner retain that declared ownership and custody history.

Fabric references and swatches

Keep the supplier fabric code, colourway, stated width, relevant specification documents and sample reference together. Distinguish a general sample card from an approved cutting linked to the actual stock lot.

Trade orders and allocations

Confirm the buyer, agent authority, length unit, required piece continuity and any shade restriction. Record the accepted supply and dispatch conditions before committing identified rolls or authorising a cut.

Roll receiving and stores

Record each received roll or piece against its source, declared owner, lot label, observed condition and length evidence. Separate quantities awaiting checks from released stock and preserve the identity of remnants.

Cut-length and dispatch control

Give the responsible operator the accepted order and roll allocation, record the measured supply and remaining piece, then check packing references. This is transaction control, not a cutting technique or inspection procedure.

Fabric claims and accounts

Link shade, length or condition concerns to the supplied roll and order. Separate the buyer's claim, received return, inspection decision, agreed adjustment and actual settlement in the account.

The records that hold the operation together.

  • Fabric reference: supplier code, description, colourway, stated width, unit of measure, specification source and sample or cutting reference.
  • Roll and piece register: physical identifier, supplier lot or shade label where provided, declared owner, source receipt, location, recorded length, length evidence and hold status.
  • Buyer instruction: purchasing party, agent authority, fabric and accepted sample reference, required length, continuity requirement, price basis and approved alternatives.
  • Allocation and cut record: selected roll, release decision, measured issue, remaining piece identity, authorised loss or adjustment and linked order line.
  • Claim and settlement file: supplied roll, stated issue, available photographs or sample, processing already undertaken, actual returned length, disposition, credit and payment references.

Operational bottlenecks to check

Total metres hide unusable piece lengths

Several short remnants can exceed the requested total yet fail a continuous-length requirement. Review availability by physical piece, not just a fabric-wide balance.

A sample is mistaken for the next lot

A swatch book and a later supply can carry different lot evidence. Record exactly what the buyer approved and seek a fresh decision when the proposed supply changes.

A cut leaves an unexplained remainder

The issue quantity, source roll and remaining piece must reconcile with authorised adjustments. A new remnant label without its parent reference breaks the path back to receipt.

The broker and buyer give different instructions

An agent may request a substitution while the purchasing business still expects the original shade. Confirm whose acceptance can change the order before releasing material.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Establish the fabric reference

    Record the product description and source specification, identify the sample shown and clarify the buyer's width, shade and continuity requirements. Avoid treating a screen image as approval of a physical stock lot.

  2. 2. Confirm the available pieces

    Check released rolls and their recorded lengths against reservations. If the buyer needs a stock cutting or lot approval, retain that decision separately from a deposit or purchase instruction.

  3. 3. Accept and allocate the order

    Agree the length unit, price basis, permitted split pieces and dispatch terms. Reserve identified rolls only after the relevant commercial and stock release decisions are recorded.

  4. 4. Record the issued length

    Pass the authorised instruction to the responsible team and record actual quantities supplied. Preserve the source roll, remaining length and reason for any difference without prescribing physical cutting methods.

  5. 5. Dispatch and reconcile billing

    Match the packing references to the allocated fabric and quantity evidence. Record carrier handover and invoice under the approved billing basis while retaining any unfilled or disputed order balance.

  6. 6. Review claims and remaining stock

    Trace a buyer concern to the original roll and agreed reference, establish whether fabric was processed, and obtain the responsible decision. Keep returned lengths on hold until their disposition is approved.

Roles and responsibility boundaries.

Fabric sales contact

Captures the intended supply specification, sends the correct swatch reference and obtains a clear buyer decision about any different lot or split length.

Roll storekeeper

Maintains location, declared owner, length and hold status for each physical piece, and traces reductions or movements to their source documents.

Dispatch and measurement checker

Checks the allocated fabric identity and recorded quantities against the order, preserving the original roll reference when a new remainder is recorded.

Claims and accounts owner

Coordinates the authorised commercial decision with qualified fabric assessment where needed, then reconciles approved adjustments without assuming a supplier has accepted the same claim.

Reports your managers need.

  • Released and reserved lengths by fabric, colourway, lot and physical roll, with remnants listed separately.
  • Open orders requiring a continuous piece, buyer lot approval or a decision on split supply.
  • Roll receipts, issued lengths and remaining quantities with unresolved measurement or count differences.
  • Claims by supplied roll and reason, showing held returns, supplier responses and pending commercial adjustments.

Connections to scope

  • Supplier lists and stock imports need agreed fabric codes, units, roll identifiers and lot fields. A file without physical piece detail cannot establish continuous-length availability.
  • Accounting, order capture and carrier handoffs require a reviewed mapping of buyer, roll, order and invoice references. Measurement equipment or supplier portals need separate access and capability checks; their connection is not assumed.

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Review real fabric transactions

Compare a whole-roll sale, a cut-length order and a short remnant against their source records. Agree units, identifiers and who accepts stock measurements before importing balances.

Confirm stock and sample links

Reconcile selected physical pieces with receipts, declared owners and reservations. Identify which sample references describe a range and which record a specific buyer approval.

Rehearse changes and claims

Try an insufficient continuous length, a proposed different shade lot and a returned cut piece. Confirm that approvals, issue quantities and account adjustments remain independent.

Set responsibility for corrections

Name who can amend roll balances, approve alternative supply and decide commercial claims. Review actual opening transactions before adding further locations or interfaces.

Limitations to settle before implementation

  • This is fabric wholesale, not weaving, dyeing, finishing or garment production. A broker who never holds goods needs a different stock scope, even when selling the same fabric references.
  • Source specifications and saved inspection decisions do not establish suitability for a finished product, colourfastness, fire performance or other technical outcomes. Qualified assessors and the relevant evidence remain necessary.
  • Length tolerances, cut-piece returns, credit terms and responsibility for processing-related claims depend on the actual agreement and responsible review. No supplier's published policy is applied as a universal rule.
  • A sample approval, payment or allocation does not by itself transfer legal ownership or establish delivery. Supplier acceptance, customer acceptance and custody evidence remain distinct.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Maintain fabric references, swatches and accepted lot decisions
  • Receive and allocate identified rolls or agreed cut lengths
  • Track roll issues, remaining pieces and location balances
  • Resolve fabric claims and reconcile length-based billing
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements