Skip to main content
GullySystem
Logistics

Order Management for Textile wholesalers

Control fabric orders through buyer approval, physical roll allocation, recorded supply and remaining commitments.

CRM

Does this function belong in your operation?

Use when trade fabric orders depend on specific lengths, roll allocations, sample decisions or approved alternatives.

An authorised trade buyer confirms a fabric requirement and its commercial conditions.

A fabric order needs the accepted reference, length unit and any requirement for one continuous piece or a particular lot. Confirm whether the buyer accepts split lengths before allocating rolls. Keep payment separate from sample or stock-cutting approval. A changed shade, short roll or substituted fabric requires the authorised buyer's decision; neither a broker's message nor a supplier estimate automatically changes the customer's commitment.

Bring the records the workflow depends on.

  • Purchasing party, agent authority and delivery instructions
  • Fabric, colourway and accepted specification or sample references
  • Required length, unit, continuity and lot restrictions
  • Price basis, release decisions and physical availability evidence

Outputs to check

  • Accepted fabric order and buyer decisions
  • Roll allocation and authorised issue record
  • Outstanding length and fulfilment reconciliation

Follow the order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Record the accepted requirement

    Capture the fabric and length unit, the required quantity and whether split pieces are permitted. Identify the purchasing party and whose acceptance can authorise a different shade, fabric or supply arrangement.

  2. 2. Resolve sample and lot decisions

    If the buyer requires a cutting from available stock, record its reference and explicit decision. A deposit, purchase message or general swatch receipt is not automatically approval of that lot.

  3. 3. Check and allocate physical pieces

    Compare released roll lengths with reservations and continuity requirements. Record supplier-dependent supply separately; customer acceptance does not establish supplier commitment or available stock.

  4. 4. Approve the issue instruction

    Confirm the identified roll, accepted length and commercial release before passing the instruction to the responsible team. Changes requiring another piece or lot return to the authorised buyer for a decision.

  5. 5. Record actual supply

    Link the issued length and source roll to the order, then record the packed pieces and carrier or buyer handover. Preserve any short, held or disputed balance instead of replacing the requested length with the supplied amount.

  6. 6. Reconcile and close

    Match the supply evidence, approved cancellations and billing. Retain unresolved claims or account adjustments with their owners, and close only the obligations that have a recorded outcome.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Fabric sales contact

Clarifies continuity and sample requirements, records buyer acceptance and obtains decisions on proposed supply changes.

Roll allocation owner

Checks released physical pieces and reservations, then identifies the exact source for the authorised supply.

Dispatch and accounts contact

Provides actual length and handover evidence and reconciles approved billing quantities without closing unresolved shortages.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Enough metres but no continuous piece

Present actual piece lengths and obtain acceptance of a split or other supply. Keep the original requirement unresolved until the buyer decides.

Allocated lot differs from the approved cutting

Hold release and identify the proposed lot. Obtain any required new buyer approval rather than assuming the same colourway is sufficient.

Buyer cancels after a cut is authorised

Check what has physically occurred and review the applicable commercial terms. Record the approved outcome without assuming the fabric can be restored to the original roll.

Agent and buyer instructions conflict

Confirm authority with the purchasing party and preserve both instructions. Suspend the affected change until the responsible decision is documented.

Can this work independently?

An order can use entered instructions without a connected CRM. Stock establishes available physical pieces, sample records support buyer decisions and billing follows the agreed commercial event. Supplier acceptance, buyer acceptance, payment, title and custody are separate facts. The order record must not infer one from another.

Systems and records it connects with

  • Product management: Fabric reference, specification source and length units.
  • Stock tracking: Roll reservations, actual issues and remaining pieces.
  • Invoice management: Authorised billable lengths and approved adjustments.

Configure, test and introduce the workflow.

  • Trace a whole-roll order and a cut-length order from buyer instruction to dispatch, noting all sample and release decisions.
  • Trial a split-length alternative, a changed lot and a cancellation after an issue instruction.
  • Reconcile existing open lengths and allocations, then assign responsibility for buyer decisions and order closure.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • A requirement for one continuous piece is not satisfied by an unapproved combination of remnants.
  • Changes to the accepted fabric, lot or split-length arrangement retain buyer authority.
  • Requested, supplied, cancelled and outstanding lengths reconcile in their agreed unit.
Textile wholesalers

How the business operates.

A textile wholesaler supplies fabric to trade buyers from identified rolls, pieces or agreed cut lengths. The buyer selects a fabric reference and colour, but the transaction also depends on width, sample reference, shade or lot identity, length units and any need for a continuous piece. Two rolls with enough combined metres do not necessarily satisfy an order for one unbroken length. This scope covers physical fabric distribution, including the commercial control of cut-length orders. It overlaps other wholesalers in receiving, accounts and dispatch, while roll identity and residual length give it a different stock model from finished garments. Weaving, dyeing, finishing, garment manufacture and installation remain separate operations. Goods held for another owner retain that declared ownership and custody history.

Fabric references and swatches

Keep the supplier fabric code, colourway, stated width, relevant specification documents and sample reference together. Distinguish a general sample card from an approved cutting linked to the actual stock lot.

Trade orders and allocations

Confirm the buyer, agent authority, length unit, required piece continuity and any shade restriction. Record the accepted supply and dispatch conditions before committing identified rolls or authorising a cut.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Fabric reference: supplier code, description, colourway, stated width, unit of measure, specification source and sample or cutting reference.
  • Roll and piece register: physical identifier, supplier lot or shade label where provided, declared owner, source receipt, location, recorded length, length evidence and hold status.
  • Buyer instruction: purchasing party, agent authority, fabric and accepted sample reference, required length, continuity requirement, price basis and approved alternatives.
  • Allocation and cut record: selected roll, release decision, measured issue, remaining piece identity, authorised loss or adjustment and linked order line.

Operational bottlenecks to check

Total metres hide unusable piece lengths

Several short remnants can exceed the requested total yet fail a continuous-length requirement. Review availability by physical piece, not just a fabric-wide balance.

A sample is mistaken for the next lot

A swatch book and a later supply can carry different lot evidence. Record exactly what the buyer approved and seek a fresh decision when the proposed supply changes.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Establish the fabric reference

    Record the product description and source specification, identify the sample shown and clarify the buyer's width, shade and continuity requirements. Avoid treating a screen image as approval of a physical stock lot.

  2. 2. Confirm the available pieces

    Check released rolls and their recorded lengths against reservations. If the buyer needs a stock cutting or lot approval, retain that decision separately from a deposit or purchase instruction.

  3. 3. Accept and allocate the order

    Agree the length unit, price basis, permitted split pieces and dispatch terms. Reserve identified rolls only after the relevant commercial and stock release decisions are recorded.

  4. 4. Record the issued length

    Pass the authorised instruction to the responsible team and record actual quantities supplied. Preserve the source roll, remaining length and reason for any difference without prescribing physical cutting methods.

  5. 5. Dispatch and reconcile billing

    Match the packing references to the allocated fabric and quantity evidence. Record carrier handover and invoice under the approved billing basis while retaining any unfilled or disputed order balance.

  6. 6. Review claims and remaining stock

    Trace a buyer concern to the original roll and agreed reference, establish whether fabric was processed, and obtain the responsible decision. Keep returned lengths on hold until their disposition is approved.

Industry reports to connect with

  • Released and reserved lengths by fabric, colourway, lot and physical roll, with remnants listed separately.
  • Open orders requiring a continuous piece, buyer lot approval or a decision on split supply.
  • Roll receipts, issued lengths and remaining quantities with unresolved measurement or count differences.
  • Claims by supplied roll and reason, showing held returns, supplier responses and pending commercial adjustments.

Questions before implementation.

When should textile wholesalers consider order management?

Use when trade fabric orders depend on specific lengths, roll allocations, sample decisions or approved alternatives. An authorised trade buyer confirms a fabric requirement and its commercial conditions.

What should we bring to the requirements discussion?

Bring anonymised examples of Purchasing party, agent authority and delivery instructions; Fabric, colourway and accepted specification or sample references; Required length, unit, continuity and lot restrictions; Price basis, release decisions and physical availability evidence. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Control fabric orders through buyer approval, physical roll allocation, recorded supply and remaining commitments. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Order control does not prescribe fabric cutting or testing, promise supplier availability or establish delivery from a planned dispatch date.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. A requirement for one continuous piece is not satisfied by an unapproved combination of remnants. Use this check when reviewing the first working version.

Talk to us

Discuss order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements