Skip to main content
GullySystem
Automotive

Batch and Serial Tracking for Tyre dealers

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

Each tyre’s serial and manufacture week are recorded at sale, so an age check or recall is answered from the invoice. Claim tyres carry the same number to the maker. Old stock is sold first.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Tyre dealers

How the business operates.

A brand tyre dealer buys from the maker’s depot against a monthly target. The range runs from scooter tyres to radial truck tyres, with tubes, flaps, valves and wheel weights alongside.

Stock by size, brand and pattern

Count each size, brand, pattern and load rating with its rack location and reorder level, so the counter answers from the screen rather than a walk to the rack.

Serial and manufacture week

Record the week and serial when stock is received, and see them again on the invoice and on any claim.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Tyre stock by size and brand. Keep counts by size, brand, pattern, speed rating and load index, with rack location and reorder levels, so the counter sees availability while the customer waits.
  • Manufacture week and serial records. Record the DOT week and serial of each tyre received and sold, so tyre age and warranty can be read from a single record. Old stock is flagged for a discount before it ages out of the rack.
  • Fitting and service jobs. Open a job card for mounting, nitrogen filling, puncture repair, valve stem changes and TPMS resets. Technician and bay are noted on each card. Jobs queue by bay.
  • Alignment and balancing records. Save camber, caster and toe readings, along with balancing weights, for every vehicle visit, before and after, so the work can be shown to the owner.

Operational bottlenecks to check

Sizes are counted by eye

A size is promised on the phone and then not found on the rack when the customer arrives. The customer goes next door.

Claim tyres lose their paperwork

A failed tyre waits for inspection, but the invoice, the serial and the fitting date are in three different places. The claim stalls.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry

    The buyer names a vehicle or a size and asks for a tyre. The shop lookup runs by size, brand, pattern and speed rating, then quotes from the price list.

  2. 2. Sale and exchange

    The tyres are picked from the rack, and the serial or DOT week is noted. Old casings taken in exchange are valued and entered against the invoice, and each line is then locked against edits.

  3. 3. Fitting

    A job card opens for mounting, balancing, nitrogen filling or alignment. The technician marks each step done, and the vehicle’s odometer reading is saved. Wheel nut torque is signed off.

  4. 4. Billing

    A tax invoice covers the tyres, fitting charges and the valves or weights used. It is paid in cash, by card, transfer or wallet, or posted to the customer’s account.

  5. 5. Warranty

    If a tyre fails, the invoice and serial are found from the vehicle number. The claim goes to the maker. It is followed to a decision, with the inspection notes attached.

  6. 6. Follow-up

    Rotation and replacement reminders go to the customer by WhatsApp or SMS, based on the last fitting and the kilometres recorded, before the tread wears out.

Industry reports to connect with

  • Sales by brand, size and pattern
  • Tyres in stock by size, age and rack
  • Fitting and alignment jobs by technician
  • Old tyres taken in and their disposal

Questions before implementation.

When should tyre dealers consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements