Skip to main content
GullySystem
Automotive

Stock Tracking and Alerts for Used car dealers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Cars unsold for a set number of days show on a list with their holding cost. Yard consumables are counted too. The manager marks a price cut before the car goes stale.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Used car dealers

How the business operates.

No two cars on the forecourt cost the same to get ready. One needs tyres and a polish. Another needs a gearbox repair, a repaint and a new set of keys from the manufacturer. If those costs live in a workshop book, the dealer learns the true margin on a car only after it has gone. That is late.

Vehicle file from purchase

Record the source, purchase price, registration, odometer, previous owners and the documents received. The file stays with the car. It closes on sale.

Inspection and reconditioning jobs

Open a work order per repair, respray or valet so parts and labour land on that car’s cost, and book any bodyshop invoice against the same stock entry.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Vehicle purchase and file. Open a file for each car with source, price paid, registration, odometer reading, previous owners and documents received. Photos and the inspection report stay inside it. Nothing is retyped between desks or branches.
  • Inspection reports. Record faults by panel, tyre, engine and interior, with an estimated repair cost for each. The report stays with the car. Questions from a buyer are answered from it directly, without ringing the inspector.
  • Reconditioning and workshop jobs. Raise jobs for mechanical repair, paint and valet. Parts used and labour hours post to the car, and an outside bodyshop bill is matched to the same file, so cost stays honest to the last bolt.
  • Stock register and ageing. List every car by status, days on the lot and total cost. Cars past a set age are flagged for review, with the floor figure beside each one so the manager can decide without opening any other screen.

Operational bottlenecks to check

Reconditioning cost is never added to the car

Tyres, paint and a clutch job are paid for from the workshop account. Everyone who prices the car then forgets them. The listed margin is wrong, and a discount is granted that the car cannot afford. That is common.

Old stock hides on the forecourt

A car that arrived ten weeks ago sits behind newer ones, and nobody has marked it down. Interest and parking cost keep running against the money tied up in it. Cash sits idle here.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Purchase

    Every car starts with a file. Bought at auction, from a private seller or as a trade-in, it opens with price, registration, odometer, owners and the papers received, and nothing is assumed about its history.

  2. 2. Inspection

    Faults are recorded by area. The inspector estimates the work needed, and the buyer sees that estimate before the offer becomes final, so a worn clutch or a leaking sump is priced in early.

  3. 3. Reconditioning

    Repair, paint and valet jobs are raised, with the workshop or outside bodyshop named, and parts and labour post to the car’s cost. The car moves to ready only when the last job closes.

  4. 4. Listing and enquiries

    A ready car is photographed, priced and listed. Enquiries from each source are logged against it, test drives are booked in free hours, and the asking figure stays current on every listing site.

  5. 5. Deal

    The deal is written down. The salesperson agrees the figure, notes any trade-in, finance and warranty, and takes a reservation deposit, and the invoice is drawn from these lines before the buyer signs.

  6. 6. Handover and transfer

    Documents are checked off against the list, the balance is collected and the keys are released. Then the ownership transfer is tracked until the registration office files it, and the file closes.

Industry reports to connect with

  • Stock by days on the lot and total cost per car
  • Margin per car after purchase, reconditioning and selling costs
  • Reconditioning jobs open, with cost against the estimate
  • Enquiries by source, salesperson and cars sold

Questions before implementation.

When should used car dealers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements