Skip to main content
GullySystem
Automotive

Stock Tracking and Alerts for Used two-wheeler dealers

Track each held used motorcycle or scooter by identity, ownership basis, physical location and sale availability.

Inventory Management

Does this function belong in your operation?

Use for dealers holding actual used units for resale. A listing-only broker requires a different record and must not turn advertised vehicles into owned stock.

A vehicle is physically accepted into dealer custody or an existing held unit changes location, reservation or review status.

Used motorcycles and scooters need unit records rather than a single quantity against a model name. Review identity, owned or held-consignment basis, location, keys, document custody and the reason a unit is unavailable. A move to an outside workshop changes custody without making a sale. Reservations and condition holds must remain visible together. Agree how physical counts and supported corrections work before using the register to answer a buyer’s availability enquiry.

Bring the records the workflow depends on.

  • Unit identity and observed condition reference
  • Actual purchase or held-consignment agreement and intake evidence
  • Locations, key and document custody records
  • Document and condition holds, reservations and release authority

Outputs to check

  • Unit-level stock and custody register
  • Availability list showing each hold and reservation
  • Physical-count differences and approved correction history

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Establish the held unit

    Match the intake to the actual vehicle and record ownership basis. Keep proposed acquisitions outside available stock until physical intake is confirmed.

  2. 2. Record custody movements

    Capture the destination and acknowledgement for workshop, showroom or other authorised movements. A move to an outside repairer does not remove the unit through a sale.

  3. 3. Maintain separate holds

    Record document review, unfinished refurbishment and buyer reservation independently. Releasing one reason must not clear the others.

  4. 4. Count and investigate

    Compare held units, keys and locations with the register. Investigate absent units or mismatched identity before approving a correction.

  5. 5. Record handover or return

    Link an actual buyer handover or return to the owner to its decision and evidence. Preserve the earlier ownership basis and movement history.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Stock custodian

Records physical intake and movements and reports missing keys, documents or units.

Buying reviewer

Confirms the acquisition or holding basis and refers unresolved ownership-document questions to the responsible adviser.

Sales coordinator

Checks current holds and reservation status against the identified unit before giving an availability response.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unit advertised but not held

Keep it outside physical stock and retain the actual intermediary arrangement separately.

Consignor withdraws a held vehicle

Review the holding agreement and outstanding commitments before recording the authorised physical return.

Identity or location differs

Hold the affected unit for investigation and preserve the original record rather than editing away the discrepancy.

Can this work independently?

The register requires confirmed physical intake, acknowledged movements and maintained review statuses. Order references support reservations; refurbishment records explain condition holds. Actual document review and release decisions remain with named people, whether recorded manually or passed through an agreed connection.

Systems and records it connects with

  • Order management: Unit reservation, cancellation and actual handover references.
  • Job cards: Approved refurbishment, outside-work custody and unresolved findings.
  • Accounting records: Acquisition or consignor references and supported unit cost entries.

Configure, test and introduce the workflow.

  • Count held units by actual identity and location, recording owned and consignment bases separately.
  • Test a unit at an outside workshop with both a document hold and a buyer reservation.
  • Rehearse a missing unit, a reservation cancellation and an authorised return to the owner; compare register changes with physical evidence.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Two used units of the same model remain separately identifiable.
  • A workshop movement changes custody without creating a sale or a new acquisition.
  • A released reservation leaves any document or condition hold intact.
  • A count adjustment records the approver and supporting evidence.
Used two-wheeler dealers

How the business operates.

A used two-wheeler dealer must know which motorcycle or scooter is physically held, who owns it, what the buying assessment found and what work was approved before resale. An offer to a seller, acquisition payment, workshop completion and ownership-transfer status are different records. This scope covers dealers holding identifiable units for resale, including held consignment units only where the actual agreement defines custody and selling authority. It does not treat a broker’s listing as dealer stock. Proposed software requirements connect each unit to its condition disclosures, cost history, reservation and buyer handover; they do not establish legal title or mechanical condition.

Buying and unit intake

Record the proposed seller, vehicle identity, assessment evidence and accepted buying terms. Separate an indicative valuation from an authorised purchase and actual payment.

Stock and refurbishment

Locate each held unit, retain keys and document custody, and track approved repair or cleaning work. Review returned outside-work evidence before changing its sale status.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Unit identity, acquisition source and physical intake record
  • Assessment photographs, observed reading and attributed seller disclosures
  • Document custody checklist and external review status
  • Owned or held-consignment status with the actual agreement reference

Operational bottlenecks to check

A held bike looks available

A unit can be on the floor while waiting for document review, outside-work completion or a buyer decision. Those reasons need distinct statuses.

Refurbishment costs lose their unit

A combined workshop bill obscures the spend on each vehicle. Allocate supported line amounts and retain unresolved allocations for review.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Assess the offered unit

    Identify the actual motorcycle or scooter, record observations and seller declarations, and retain the proposed valuation. Route unresolved document or condition concerns to the responsible reviewer.

  2. 2. Accept acquisition and custody

    Record the accepted purchase or holding agreement and the actual intake. Keep seller payment evidence and authority-document status separate from physical possession.

  3. 3. Approve and review refurbishment

    Link work requests, cost approvals and actual parts or labour to the unit. Record declined or unfinished work in the condition review before releasing it for sale.

  4. 4. Reserve the disclosed unit

    Use the actual unit identity, agreed description and accepted terms. Check competing reservations and preserve approvals for changes or cancellation.

  5. 5. Hand over and follow up

    Record keys, documents and agreed accessories handed to the buyer. Reconcile billing and receipts, then retain pending external transfer actions until evidenced completion.

Industry reports to connect with

  • Held units by ownership basis, location, hold reason and reservation
  • Acquisition and refurbishment cost by unit with unsupported allocations
  • Sold units awaiting handover items or external document follow-up
  • Cancelled reservations, approved refunds and outstanding payment actions

Questions before implementation.

When should used two-wheeler dealers consider stock tracking and alerts?

Use for dealers holding actual used units for resale. A listing-only broker requires a different record and must not turn advertised vehicles into owned stock. A vehicle is physically accepted into dealer custody or an existing held unit changes location, reservation or review status.

What should we bring to the requirements discussion?

Bring anonymised examples of Unit identity and observed condition reference; Actual purchase or held-consignment agreement and intake evidence; Locations, key and document custody records; Document and condition holds, reservations and release authority. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track each held used motorcycle or scooter by identity, ownership basis, physical location and sale availability. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Stock records do not establish legal title, finance clearance, odometer accuracy or mechanical condition. Availability responses require the dealer’s current physical and release checks.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Two used units of the same model remain separately identifiable. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements