Skip to main content
GullySystem
Logistics

Warehouse Management for Warehousing and fulfilment providers

Track client goods through actual receipt, storage movements, authorised picking and physical handover.

Inventory Management

Does this function belong in your operation?

Use for providers with physical custody of client goods and identified storage locations. A listing or space-booking intermediary without custody needs a different process.

An expected client shipment arrives or an authorised instruction requires held goods to move.

Client goods need a custody record that survives receipt, putaway, picking and handover. Keep the client and owner beside the item or handling-unit identity, count basis and actual location. A dock acknowledgement can confirm packages while their contents remain unchecked. Record receipt differences and held quantities before making stock available. Outbound work uses an authorised client instruction, and a prepared pick list remains separate from physical collection or delivery evidence.

Bring the records the workflow depends on.

  • Client, goods owner and authorised instruction contacts
  • Expected shipment, item identifiers and agreed counting units
  • Confirmed locations and accepted handling instructions
  • Release requests, holds and actual movement acknowledgements

Outputs to check

  • Client-owned goods location and custody record
  • Outbound picking and acknowledged handover history
  • Held receipts, count differences and unresolved transfer list

Follow the warehouse management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify the inbound custody

    Match the actual arrival to its client and expected shipment. Record handling-unit identities separately from product codes, preserving unknown items for review.

  2. 2. Record checks and differences

    Capture observed quantities and condition at the agreed checking level. Keep declared contents, counted packages and counted units distinguishable; attach the evidence for shortages or damage.

  3. 3. Confirm putaway

    Record the actual location and the person acknowledging placement. Goods awaiting review keep their hold when moved; a new location does not make them available.

  4. 4. Prepare authorised outbound work

    Check the client instruction, current holds and requested units before picking. Record actual quantities and approved packaging work, leaving any unsupplied balance open.

  5. 5. Acknowledge the physical handover

    Link the collecting party and released handling units to actual evidence. A pick list or dispatch document alone does not establish carrier collection.

  6. 6. Reconcile locations

    Compare acknowledged movements and physical counts. Keep transfers awaiting receipt visible and route discrepancies to the named supervisor and client contact.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Receiving custodian

Records arrival, actual checks and unresolved differences without converting a declaration into a verified count.

Warehouse supervisor

Reviews location use, work instructions and held goods with the responsible operational specialists.

Dispatch coordinator

Records picked quantities and actual collection against the approved client instruction.

Client account coordinator

Obtains missing instructions and preserves the client’s decision and any outstanding disagreement.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown or damaged arrival

Record custody and observed condition in a held state. Seek the authorised identity and handling decision before including it in available stock.

Partial outbound quantity

Preserve the actual pick and the unfulfilled instruction balance. Do not borrow another client’s goods to complete the request.

Transfer not acknowledged

Keep the sending reference and in-transit quantity open until the receiving custodian confirms or investigates it.

Client changes release instruction

Retain the old version and check whether the physical movement can still be stopped. Obtain an explicit acceptance or exception response.

Can this work independently?

A standalone custody register can use entered client instructions and signed acknowledgements. Item and location definitions must match physical records. Stock balances consume actual movements; billing consumes reviewed activity. Physical safety, suitability, goods ownership and release authority remain responsible-party decisions. The record does not perform those checks.

Systems and records it connects with

  • Stock tracking: Client, owner, item, location and held quantities.
  • Contract management: Accepted service scope and instruction authority.
  • Client dispatch records: Requested, picked and actually released quantities.
  • Invoice management: Reviewed storage and handling evidence, not merchandise sales.

Configure, test and introduce the workflow.

  • Trace a client’s inbound shipment from expected quantities to checked receipt and actual location.
  • Test shared item codes, a held receipt and a transfer awaiting acknowledgement; compare the record with the physical goods.
  • Rehearse partial release and a late instruction change, then reconcile a count without silently clearing outstanding holds.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • One client’s item code cannot select another client’s goods.
  • A package count remains distinguishable from a verified item count.
  • Changing location does not clear a stock hold.
  • Prepared quantities and actual handed-over quantities can differ without losing their history.
Warehousing and fulfilment providers

How the business operates.

A warehousing and fulfilment provider takes custody of client goods and carries out the storage and handling work agreed with that client. The stock belongs to the recorded owner; receipt at the dock does not turn it into the provider’s purchased inventory. This scope follows expected inward shipments, actual receipt, location movements, authorised outbound instructions and service billing. A provider can store goods without operating delivery vehicles. Proposed software requirements must preserve client identity, the extent of each physical check and unresolved differences through every handoff. They do not establish ownership, product suitability or an installed warehouse system.

Client onboarding and instructions

Confirm the contracting party, goods owner and people authorised to send release or disposition instructions. Review item identifiers, units, accepted handling scope and the evidence needed for the opening stock transfer.

Receiving and storage

Match expected arrivals to actual packages and observed quantities. Record the agreed depth of checking, receipt differences and the confirmed storage location, including goods awaiting a client decision.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Client, goods owner and authorised instruction contacts
  • Item and handling-unit identities with agreed counting units
  • Expected arrival, actual receipt and observed condition evidence
  • Location, held-stock reason and movement acknowledgement

Operational bottlenecks to check

Identical item codes belong to different clients

The same short code can appear in separate client catalogues. Record owner and client context with the item so a pick or count does not borrow another client’s stock.

A carton count becomes a unit count

Receipt evidence may confirm packages without verifying every item inside. Preserve the checking basis instead of presenting declared contents as counted units.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Agree the custody arrangement

    Review accepted goods, receiving checks, access to records and authority for release or disposal. Identify what the client must supply before stock can be treated as available.

  2. 2. Receive against the expectation

    Record the physical arrival and count at the agreed level. Retain both declared and observed quantities; isolate unidentified or disputed items in the record pending a responsible decision.

  3. 3. Confirm putaway and movements

    Record where each identified handling unit or item quantity was actually placed. Keep subsequent moves traceable, including transfers awaiting receiving acknowledgement.

  4. 4. Execute an authorised instruction

    Check client identity, stock holds and the requested destination before picking. Record partial quantities and any approved packing instruction; retain what remains outstanding.

  5. 5. Acknowledge release or returned custody

    Capture actual handover separately from preparation. Returned goods regain physical custody on receipt, while their availability waits for the applicable inspection and client disposition decision.

  6. 6. Reconcile stock and service activity

    Compare opening quantities, acknowledged movements and counts by client. Review billable storage and handling against the contract without turning a stock adjustment into a claim settlement.

Industry reports to connect with

  • Client stock by owner, location, availability and hold reason
  • Expected arrivals versus confirmed receipts and unresolved differences
  • Outbound instructions with picked, handed-over and outstanding quantities
  • Counts awaiting investigation or client acknowledgement

Questions before implementation.

When should warehousing and fulfilment providers consider warehouse management?

Use for providers with physical custody of client goods and identified storage locations. A listing or space-booking intermediary without custody needs a different process. An expected client shipment arrives or an authorised instruction requires held goods to move.

What should we bring to the requirements discussion?

Bring anonymised examples of Client, goods owner and authorised instruction contacts; Expected shipment, item identifiers and agreed counting units; Confirmed locations and accepted handling instructions; Release requests, holds and actual movement acknowledgements. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track client goods through actual receipt, storage movements, authorised picking and physical handover. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The module does not establish title, inspect goods by itself, operate handling equipment or provide transport. Specialist storage and regulatory arrangements require separate confirmed scope.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. One client’s item code cannot select another client’s goods. Use this check when reviewing the first working version.

Talk to us

Discuss warehouse management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements