Skip to main content
GullySystem
Manufacturing

Business solutions for Water treatment chemical manufacturers

Explore software for work such as “Antiscalants for RO plants”. Review each business function below, including when it fits and what to check before implementation.

Water treatment chemical manufacturers

How the business operates.

A water treatment chemical manufacturer sells more than a product. It sells a dosing programme for a cooling tower, a boiler, a reverse osmosis plant or an effluent unit, and the customer expects the drum to match that programme. The drum, the dose and the water results belong together.

Formulations and batches

Hold each formulation with its actives, strengths and tolerances. Every batch records the revision used, the weights charged and the pH and gravity at release.

Customer sites and programmes

Record each site with its system type, dosing rate, products and delivery cycle, so a reorder follows the programme and not a phone call.

Field visit reports

Capture water readings, dose changes and pump checks on a phone during the visit. The report is attached to the site and the next order is suggested from it.

Packing and lot labels

Pack carboys, drums and IBCs against the batch, with the label text drawn from the product record. Sample retained is logged.

Safety data sheet register

Track the sheet revision issued to each customer, so a revision can be sent to every site that holds the old one.

Dosing equipment and spares

Keep pumps, tubing and controllers with their site, installation date and service visits, separate from the chemical supply but linked to it.

Returnable container register

Records the drums, totes and carboys sent to each plant and the empties returned. Deposit amounts and time out are shown. The dispatch clerk chases sites holding unreturned totes.

Sample and trial log

Keeps each product sample sent to a prospective boiler house or cooling tower, with the trial dose and result. Chemists enter the follow-up reading. Sales staff see which trials became repeat orders.

Raw material supplier approvals

Holds the suppliers approved for phosphonates, acids and polymers, with the grades each may supply. Purchase staff see the approval status when ordering. Lapsed approvals are listed for the quality head.

Tanker loading record

Records each bulk tanker loaded at the plant, with the product, gross and tare weights, seal numbers and driver. Dispatch staff attach it to the invoice. Customers match it against what arrived.

The records that hold the operation together.

  • Raw materials and suppliers. Receive actives, acids, polymers and solvents with supplier lot, grade and sample status, and keep a reorder level for each material.
  • Formulation register. Store each formulation with actives, strengths and tolerances. Revisions are dated, and the batch shows which revision was charged.
  • Blend batches. Post charges by weight, substitutions, pH, specific gravity and active content for every batch, with release recorded against a named chemist.
  • Packs and lot labels. Fill carboys, drums, IBC totes and bags against a batch, then print labels with lot, date and hazard pictograms from the product record.
  • Site programmes. Hold each customer site with its system type, products, dose, delivery cycle and the engineer who covers it.
  • Field visit readings. Record conductivity, hardness, chloride, residual levels and dose changes on a phone, then attach them to the site and tower.
  • Dosing equipment and service. Register metering pumps, controllers and tubing per site with installation date and service visits, so a failure can be matched to recent deliveries.
  • Safety sheet revisions. Track which revision of each sheet went to which customer, and list the sites that still hold an earlier one.

Operational bottlenecks to check

Formulations change without a trace

A neutraliser quantity is adjusted to suit a cheaper raw material, and the new strength is never written down. Two drums with one label then behave differently in the tower, and the customer sees a scale problem that nobody at the factory can explain from the paperwork. It repeats.

Site data sits in engineers’ notebooks

Conductivity and chloride readings are written in field books. When the customer asks why the dose changed, the factory has no record of the water that prompted it.

Reorders are guessed

A boiler house runs out of biocide on a Friday because the last delivery was not linked to its daily dosing. The call comes in as a complaint, and the factory scrambles to blend, pack and dispatch a drum within the same afternoon. The drum goes out late.

Hazard documents lag the product

A safety data sheet is revised, and old sheets stay in customer folders. Nobody can list who holds which version.

Pump and chemical supply are billed apart

A dosing pump is sold on one invoice and the chemical on another. The service history of the pump is not linked to the drums sent to the same site.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Raw material receipt

    Acids, phosphonates, polymers and solvents arrive against purchase orders, with the supplier lot, drum count and sample status posted at the weighbridge.

  2. 2. Blend and test

    The batch follows the formulation revision, and weights charged, pH, specific gravity and active content are posted before the lab releases it.

  3. 3. Pack and label

    Carboys, drums, IBC totes and bags are filled against the batch, and labels print from the product record.

  4. 4. Supply to site

    Orders follow each site’s programme and delivery cycle. The delivery note carries the batch numbers that were sent.

  5. 5. Field visit

    The engineer posts titration results, pump checks and dose changes from a phone, then flags the next supply.

  6. 6. Invoice and review

    Chemicals, spares and service visits are invoiced together, and the site history sets consumption against the programme.

Roles and responsibility boundaries.

For the factory manager

Follow batches in the mixing tank, packs ready, raw materials running short and the supply due to each site this week.

For field engineers

Open a site, read its programme and last readings, post fresh results, and log a dose change before leaving the boiler house.

For laboratory staff

Post pH, gravity and active content against each batch. Any batch outside its tolerance is held.

For sales and accounts

Quote chemical and pump supply, raise invoices, and follow the balance each customer owes.

Reports your managers need.

  • Batches by formulation with pH and gravity at release
  • Raw material use and substitutions by batch
  • Sites past their delivery cycle
  • Water readings by site over time
  • Pumps and controllers by site with service dates
  • Safety sheet revision held by customer
  • Dues from customers, grouped by invoice age

Connections to scope

  • Barcode and label printers
  • Email
  • WhatsApp
  • SMS
  • Accounting export
  • Weighing scales

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Formulations and pack sizes

Strengths, pack sizes and the formulation list are keyed in exactly as the blending room works from them.

Site programmes

Customer sites, system types and dosing rates come across from the field notebooks and spreadsheets your engineers use.

Reading templates

The field reading form is set to the tests your engineers run on each system type, from tower conductivity to boiler sulphite.

Labels and safety text

Label and sheet layouts follow what your safety and regulatory staff provide. Those rules are reviewed with them during implementation.

Limitations to settle before implementation

  • A distributor who buys finished chemicals, with no blending and no site visits, needs a stock and billing tool rather than this.
  • Companies that make resins or solvents will find the matching manufacturer software closer.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Antiscalants for RO plants
  • Boiler water treatment chemicals
  • Cooling tower scale and corrosion inhibitors
  • Biocides for cooling circuits
  • Coagulants and polyelectrolytes for effluent plants
  • Membrane cleaning chemicals
  • Chlorine and disinfection products for pools and hotels
  • Chemicals supplied to service companies and dealers
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements