Skip to main content
GullySystem

Trip Sheets and Odometer Log for Tourist Vehicles

The trip sheet is the driver’s record of one hire. Start and end odometer, halts, tolls and parking go on it as the trip runs, and the odometer log keeps the readings for each vehicle. Before the final bill, the clerk sets the sheet against the quoted distance.

A hire seen through the driver’s trip sheet

Opened at the yard and closed at the clerk’s desk, a trip sheet collects what the road adds on the way. Hill roads, long queues and a late lunch all leave a mark. The driver’s phone carries it all. Nothing waits for the return.

Odometer read at departure

Before the coach leaves, the driver reads the dial and types the figure on the sheet. That start figure is fixed. Every later kilometre of the hire is measured from it, so a wrong start spoils the sum.

A halt at the hill viewpoint

The group stops at a hill viewpoint and the driver notes the halt with a time and a place. The sheet holds it. When the group later disputes an extra hour, the clerk reads the halt, not a guess.

Tolls and parking at the barrier

At the barrier the driver pays the toll and photographs the receipt. The amount is typed against the sheet. Parking at the temple is entered the same way. The receipts reach the office before the coach does.

Return and the clerk’s check

Back at the yard, the end odometer is entered and the sheet is closed. The clerk compares the run with the quoted distance. A gap is priced under the extra distance rule. Billing waits for the check.

Lines on a coach trip sheet

A trip sheet is short on purpose. It keeps the readings and receipts that settle the hire, and leaves the rest to other features. Every line is dated and tied to the booking number and the vehicle. The driver’s name comes from allotment.

Start and end odometer

Two figures bracket the hire. The start is read at departure and the end on return, both in kilometres. The odometer log keeps them against the vehicle, so each coach has a running history of readings.

Halts and night stops

Each halt carries a place, a time and a note on why. Night stops are marked as such, because the night halt rule on the rate card depends on them. A tea break is noted too.

Tolls and parking entries

Each toll and parking payment is a line with an amount, a place and a photographed receipt from the barrier. The lines add up to one figure for the sheet. Driver allowances and trip expenses settle against it.

Route changes and remarks

A detour the group asked for, a closed road or a diversion is noted on the sheet in the driver’s own words. The remark is read beside the distance gap at closing. Remarks are short and dated.

Drivers write the sheet, and others read it

One sheet has a writer and three readers. The writer is on the road with little time. The readers are at a desk with plenty of questions. The sheet answers them without a phone call.

For drivers filling the sheet

Drivers enter odometer, halts, tolls and parking on a phone and photograph each receipt as it is handed over at the barrier. Entries are short. They are made as the trip runs, not from memory afterwards.

For accounts staff comparing it

Accounts staff set the sheet against the quote, read the distance gap and price it under the extra distance rule. A disputed extra is traced back to the start and end readings. The photographs sit beside them.

For booking staff answering a customer

A customer rings to say the coach ran far beyond the quote given at booking. Booking staff open the sheet and read the odometer, halts and remarks to the caller.

For owners reading distance gaps

The owner reads quoted against actual distance for closed hires. A route that keeps running long was quoted short. That is a matter for the rate card, not a complaint against the driver. Bring the figures to the next rate review.

Where the sheet’s figures go next

Opening from the pairing made at allotment, a sheet closes into the final bill for the customer. Between the two it collects the readings, receipts and remarks that settle the hire. Other features read from it. None asks the driver to type a figure twice.

  • Opens from the pairing in vehicle and driver allotment
  • Compares quoted distance from enquiry and itinerary quotes
  • Passes toll and parking receipts to driver allowances and trip expenses
  • Feeds kilometres run into fuel and workshop records
  • Supplies extra distance lines to invoices, receipts and dues

Trip sheet habits to agree with the drivers

Drivers have to fill the sheet on the road for it to work. The habits below are agreed with drivers, not announced to them. Settle each one before the first hire. A driver who helped set a rule knows why it is there.

Who may correct an odometer reading

A mistyped reading will happen. Decide who may correct it, and whether the first figure stays visible beside the corrected one. Clerks and drivers then know what a correction looks like and who made it. Say so at the first briefing.

When the sheet is handed in

Some drivers close the sheet at the yard gate, others after unloading. Choose the moment. A sheet closed late holds up the final bill and the driver’s own settlement. Name the clerk who chases open sheets.

How a halt is described

A halt can be a meal, a viewpoint, a breakdown or a night stop. Agree a short list of halt types. Free text is slower to read and harder to total at billing. Night stops must be on the list.

Paper sheets during the changeover

Drivers already carry a paper sheet. Decide whether it is kept for the first few hires as a backup. A clerk keys any difference between the two. Drop the paper when the phone entries match.

What a trip sheet cannot prove

A trip sheet records what the driver enters and the receipts the driver photographs. It cannot check a reading against the dial. It has no tracking, so a disputed route cannot be replayed. Whether to bill an extra, waive it or take it up with the customer is the owner’s call. Tax lines on the final bill are agreed with an adviser.

FAQ

Frequently asked questions

Can a driver finish the sheet from a phone?

Yes, the driver records odometer and halts on a phone and photographs toll and parking receipts as they are handed over. Back at the office, entries are read by the clerk. A paper sheet can run alongside at first.

What if the end odometer is entered wrongly?

Set a correction rule at the start. The owner decides who may amend a reading and whether the first figure stays visible on the sheet. The distance gap is then worked out from the amended figure before the bill is raised.

How is extra distance priced from the sheet?

The end odometer less the start gives the distance run. The clerk sets it against the quoted distance, and any gap is priced under the extra distance rule you chose. The rate card supplies the figure.

Does the sheet record where the vehicle actually went?

Only what the driver enters. It has no tracking, so route changes come in as remarks and halts carry a place and a time. A dispute is read from those entries, laid out beside the odometer figures.

Who sees the sheet after the hire closes?

Accounts staff, booking staff and the owner can all open it. Closed hires stay searchable. Search runs by customer, vehicle and date, so an old hire is found without the booking number. A later query about an extra is answered from the sheet.

Where it fits

How this feature fits the system.

Tourist Vehicle Operator Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Enquiry and itinerary quotes

Each hire quote is built from the rate card for the route and vehicle, with revisions kept and an accepted quote converted to a booking.

Estimate/Quotation Management

Rate cards by vehicle and hire type

Daily, per-kilometre and package rates sit in one table, with minimum distance and night halt rules that the desk reads from.

Price Lists and Schemes

Vehicle and driver allotment

A vehicle and a driver are paired to each hire, and the booking calendar shows which coach or van is out on any date.

Vehicle and Trip Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements