Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Adhesive manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Resin drums, solvent tanks and empty pails are counted by lot and expiry. A short supply of a polymer raises a reorder note. Stores see which tank feeds which grade.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Adhesive manufacturers

How the business operates.

Adhesives are judged by whether they hold. A carton maker wants a glue that sets at line speed, a footwear factory wants a bond that survives flexing, and a woodworker wants an open time that fits the press. Each need leads to a different formulation. None is interchangeable.

Formulations and recipes

Hold each grade’s recipe with revision history, scaled to the kettle size, and its allowed raw material substitutions.

Raw material lots

Record resin, polymer, solvent and additive lots with their incoming viscosity and solids, and link them to each batch.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Grades and formulations. Hold recipe revisions for every grade, with allowed substitutions of tackifier or plasticiser and quantities scaled to the kettle size.
  • Raw material lots. Record resin, polymer, solvent and additive lots with incoming viscosity and solids. Each lot links to every batch that drew from it.
  • Kettle batch records. Capture charging order, jacket temperature, dispersion blade speed, mixing time and the operator for each kettle batch.
  • Viscosity and solids. Save Brookfield viscosity, solids content and pH against the batch. Readings are compared with each grade’s limits before release.

Operational bottlenecks to check

Viscosity drifts between batches

The same recipe gives a thicker batch when a resin lot changes. Readings sit in a notebook. The pattern is never seen.

Bond tests are not tied to the batch

A peel strength result is written on a test strip. Weeks on, nobody can say which pail in the customer’s store it describes.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Order and plan

    A customer order, or a forecast for a repeat grade such as a case-sealing hot melt, opens a kettle batch. It carries the recipe revision and the quantity to make.

  2. 2. Weighing and charging

    Resins, tackifiers, plasticisers, solvents or water, fillers and additives are weighed in charging order, and each raw lot number is recorded as it goes into the jacketed kettle. Scale readings stay on file.

  3. 3. Mixing

    The operator notes jacket temperature, dispersion blade speed and mixing time, then a sample goes to the laboratory. The kettle waits.

  4. 4. Laboratory release

    Viscosity, solids, pH, ring and ball softening point and peel or lap shear results are saved. The batch is released, reworked or held.

  5. 5. Filling

    Pails, drums, IBC totes, tubes or cartridges are filled and checked on the scale, and a batch code and use-by date are printed on each. Short fills are caught at the scale.

  6. 6. Dispatch

    Orders are picked by remaining shelf life and ship with the technical data sheet revision and safety data sheet the customer approved. Paperwork matches.

Industry reports to connect with

  • Brookfield viscosity and solids by kettle batch and grade
  • Peel and lap shear results against customer limits
  • Resin and polymer lots used in a chosen batch
  • Pails, drums and cartridges filled by batch code

Questions before implementation.

When should adhesive manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements