Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Animal feed manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Bagged feed, loose grain in silos and vitamin premix tins are counted in their own units. Every ingredient has a reorder level. A low soya meal reading shows before a mixing run is planned.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Animal feed manufacturers

How the business operates.

Feed is made to a formula for a species and a growth stage, such as broiler starter, layer mash, dairy cattle pellet or fish grower. A formula can only perform as well as the grain and meal that go into the mixer. Maize moisture, soya protein and fish meal quality shift from one truck to the next, so the mill adjusts the mix each time. The record must follow.

Raw material intake and lab tests

Weigh each truck, record moisture, protein and foreign matter against the supplier lot, and accept, adjust the price or reject before the load reaches a bin.

Formula and premix management

Hold formulas by species and stage, with ingredient shares, premix additions and revision history. Each batch locks to the formula revision it used.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Weighbridge and raw material intake. Weigh each truck, record the supplier, vehicle and declared quantity, and hold the load until the lab result is entered against that lot.
  • Laboratory results. Save moisture, crude protein, fibre, aflatoxin screening and foreign matter results for every lot, with accept, reprice and reject decisions kept beside them.
  • Bins, silos and ingredient stock. Track the level in each bin or silo by ingredient and supplier lot, with transfers between bins and alerts when a bin falls below the day’s need.
  • Formulas and premix. Maintain formulas by species and stage, such as broiler starter, layer mash or dairy pellet, with revisions, premix inclusion and approved substitutions.

Operational bottlenecks to check

Intake results are not attached to bins

A load fails on moisture, yet the same maize is already in a bin with earlier stock. The lab report sits in a file, and the batch that used it cannot be named.

Formulas drift on the shop floor

Operators substitute an ingredient when a bin runs low, and the change is made verbally. The bag says one thing and the mixer log says another. Nobody knows who changed it.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Intake and lab

    A truck is weighed in, sampled and tested for moisture, protein and foreign matter. The load is accepted, repriced or rejected before it is tipped into a bin. Nothing enters a bin unchecked.

  2. 2. Formula and plan

    The planner picks formulas by species and stage against dealer orders. The plan shows the ingredient quantities needed and the bins that must supply them. Plans follow orders.

  3. 3. Mixing

    Operators weigh ingredients and premix into the mixer, with each weight confirmed on screen. A variance against the formula must be explained before the batch closes. Variances need a reason.

  4. 4. Pelleting and cooling

    Mash is conditioned, pressed through a die, cooled and screened. The run notes the die, steam and cooler settings, and the quantity of fines returned. Fines go back in.

  5. 5. Bagging and testing

    Bags are filled to weight, sealed and stamped with the batch code. A retained sample is shelved, and finished feed test results are saved to the batch. Each batch keeps one sample.

  6. 6. Dispatch and credit

    Dealer orders are loaded from stacks against the batch codes, invoiced, and set against the dealer’s credit limit. Returned bags are logged with the reason. Credit is checked first.

Industry reports to connect with

  • Raw material lots accepted, repriced and rejected, by supplier
  • Ingredient cost per tonne of finished feed, by formula
  • Formula variances flagged at the mixer, with reasons
  • Pellet runs with settings and fines returned

Questions before implementation.

When should animal feed manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements