Skip to main content
GullySystem
Manufacturing

Quality Control for API manufacturers

Record specified inspections and the disposition of checked goods.

Manufacturing

Does this function belong in your operation?

Use when goods or production stages require documented checks before release.

Material or output reaches an agreed inspection stage.

In-process tests such as pH, loss on drying and assay are recorded against the stage that was sampled. A result outside specification places that batch on hold. Release needs a passing set.

Bring the records the workflow depends on.

  • Inspection specifications
  • Sampling and acceptance rules
  • Authorised reviewers

Outputs to check

  • Inspection readings and evidence
  • Hold, release or rejection record
  • Nonconformance follow-up list

Follow the quality control workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Select the inspection

    Identify the receipt, job or output and applicable specification.

  2. 2. Record measurements

    Capture required readings, sample details and evidence.

  3. 3. Review nonconformance

    Hold failures and assign the authorised disposition.

  4. 4. Release or reject

    Record the responsible decision and affected quantity.

  5. 5. Follow rework

    Link corrective work and reinspection without overwriting the original results.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Quality checker

Fills the check at the station and holds what fails. Simple.

Production in-charge

Sees rejection by stage and by operator, and knows which machine is drifting before the customer says so.

Purchase

Takes the gate rejections to the supplier with dates and readings attached.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Reading outside tolerance

Hold the affected quantity and route the disposition to the authorised reviewer.

Inspection incomplete

Keep release pending and show the missing measurement or evidence.

Reworked goods returned

Create a linked reinspection rather than replacing the original failure record.

Can this work independently?

Quality records can be maintained independently against identifiable receipts or jobs. Inventory and production connections must enforce any hold or release decision. The module records authorised checks; it does not select a regulatory standard or replace a qualified inspector's judgement.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Purchase returns: Approved supplier-return quantities and adjustment references.
  • Batch and serial tracking: Lot or unit identifiers carried through stock movements.

Configure, test and introduce the workflow.

  • Show us where checks happen now. A note names the checkpoints and the parameters to record.
  • Provide limits and your list of rejection reasons. A test lot can then be checked on the trial screen. Checkers use it at a station for a trial run. Their remarks return as changes.
  • Checkers, production and purchase each practise their part. Each group gets a printed card. Other stations join as the trial station settles. The team reviews rejection reasons together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Failed items follow the agreed hold rule.
  • Results retain the specification version.
  • Release decisions identify the reviewer.
API manufacturers

How the business operates.

An API plant makes a molecule in stages. Starting materials become intermediates, intermediates become crude product, and crude product is purified, dried, milled and packed. At every stage a sample is tested, and a stage that fails its specification can send material back for rework, reprocessing or rejection, each of which must be written down. Every step leaves a record.

Route and stage master

Hold each product’s synthesis route as stages with inputs, solvents, equipment and in-process test points.

Batch manufacturing records

Record charges, temperatures, hold times, yields and sample draws for each stage, with a reviewer’s sign-off.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Starting materials and suppliers. Receive materials with supplier lot, quarantine status and sampling records, and keep approved supplier lists.
  • Route and stage master. Define each synthesis route as stages with inputs, solvents, equipment and test points, with revisions under change control.
  • Batch manufacturing records. Record charges, parameters, hold times, yields and sample draws for each stage and each reviewer’s sign-off.
  • Intermediate lot genealogy. Link final lots to their intermediates and starting materials, including reprocessed and recovered material.

Operational bottlenecks to check

Intermediates lose their lineage

A final lot is built from three intermediate lots, and a reprocessed lot is blended in. The chain from final lot back to starting material is rebuilt from folders each time a customer asks.

Deviations sit in a separate file

A deviation raised during drying is tracked in a register that is not tied to the batch. Release goes ahead without anyone checking if it is closed. The gap is found later.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Starting material receipt

    Materials arrive against a purchase order, are sampled and are held until released by quality staff.

  2. 2. Stage charge and reaction

    Charges, temperatures, pressures and hold times are logged against the stage and the reactor used.

  3. 3. Isolation and drying

    Filtration, centrifuging and drying are recorded with yields and samples drawn.

  4. 4. Test and review

    Results are posted against the specification. The batch record is reviewed with its deviations before the next stage or release.

  5. 5. Mill, blend and pack

    The final powder is milled, blended and packed in sealed drums, each with a recorded seal number.

  6. 6. Release and dispatch

    The lot is released, a certificate is produced and the load is shipped with the retest date visible.

Industry reports to connect with

  • Batches by stage and product
  • Yield by stage across campaigns
  • Open deviations by age and stage
  • Intermediate lots and the final lots they fed

Questions before implementation.

When should api manufacturers consider quality control?

Use when goods or production stages require documented checks before release. Material or output reaches an agreed inspection stage.

What should we bring to the requirements discussion?

Bring anonymised examples of Inspection specifications; Sampling and acceptance rules; Authorised reviewers. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record specified inspections and the disposition of checked goods. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The software records your inspection process and does not certify product safety or regulatory conformity.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Failed items follow the agreed hold rule. Use this check when reviewing the first working version.

Talk to us

Discuss quality control for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements