Skip to main content
GullySystem
Manufacturing

Asset AMC Tracking for Blow moulding companies

Track the maintenance cover and service dates of assets your business owns or uses.

Assets and Fleet

Does this function belong in your operation?

Use when important equipment has warranties or maintenance agreements to monitor.

An asset enters service or its maintenance cover changes.

Blow machines, chillers, compressors and moulds each hold a service plan and next due date. Annual contracts with the machine supplier are listed with their visits. A compressor that is overdue is flagged.

Bring the records the workflow depends on.

  • Asset identifiers
  • Warranty and service contracts
  • Service dates and vendor contacts

Outputs to check

  • Asset coverage and renewal register
  • Service visit and fault history
  • Uncovered or overdue asset list

Follow the asset amc tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify the asset

    Confirm its tag, location and responsible custodian.

  2. 2. Record the cover

    Attach warranty or maintenance terms and effective dates.

  3. 3. Plan service

    Create due actions from the agreement and asset requirements.

  4. 4. Record delivery

    Keep vendor visits, findings and outstanding work.

  5. 5. Review renewal

    Check expiring cover and obtain the owner's renewal or replacement decision.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Maintenance in-charge

Books the vendor, records the visit, and sees which machine is due next week.

Admin manager

Watches renewals and stops a contract lapsing unnoticed.

Accounts assistant

Pays the contract bill against services actually delivered.

Owner

Reads what maintenance costs, machine by machine.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Warranty and AMC overlap

Identify the responsible provider before approving chargeable work.

Visit not completed

Keep the obligation overdue and record the vendor's next commitment.

Asset replaced or disposed

Review linked cover and renewal instructions instead of continuing reminders for the old asset.

Can this work independently?

The register can run independently using asset and contract details. Fixed-asset records supply identity, vendor records identify the service provider, and tickets capture faults. Accounts confirms supplier payment; a maintenance entry does not establish that the equipment is safe or ready to operate.

Systems and records it connects with

  • Fixed asset register: Asset identifiers, custody and acquisition records.
  • Vendor management: Approved supplier identities, terms and sensitive-change controls.
  • Ticket management: Numbered requests, ownership and resolution history.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • Share the asset list, even a rough sheet. Add whatever contract files you can find, and a note comes back listing machines with no contract or end date.
  • Load contract and warranty dates, covered assets and the agreed maintenance frequency. Check the resulting calendar with the maintenance owner, including renewals, missed visits and equipment that has no current cover.
  • Fault spotters learn the phone screen. They and the maintenance in-charge leave trained, with a guide in your own words. Complaints and visits are entered as they happen. When a renewal arrives, the machine’s history is printed beside the quotation.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Contract dates match the attached agreement.
  • Service history stays with the asset.
  • Uncovered assets are distinguishable from covered assets.
Blow moulding companies

How the business operates.

Hollow containers hide faults. Thin walls are the usual culprit. A bottle with a thin shoulder looks fine on the line and then splits in a filler’s warehouse, weeks after the shift that made it ended. The record that explains it, such as parison programme, resin lot or cooling time, is rarely near the pallet.

Container design register

Hold each bottle or drum with its volume, neck finish, target weight, mould and the allowed wall thickness range, so a setter knows the limits before the first shot.

Machine set-up sheets

Store parison programme, blow pressure, cooling time and cycle for each mould and machine pairing, and show which setting was used on every run.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Container quotations. Price a bottle, jerry can or drum from shot weight, cavities, cycle rate, and resin and masterbatch cost, then keep every revision beside the accepted price. Lost quotes stay searchable.
  • Container design register. Store volume, neck finish, target weight, allowed wall range, handle style, mould number and test requirements for each design, together with the customer’s drawing revision. Old revisions remain readable.
  • Machine set-up sheets. Keep parison programme, blow pressure, cooling time and cycle target for every mould and machine pairing, so a setter sees which settings a run really used. Good days become repeatable.
  • Resin, preform and masterbatch stock. Receive HDPE and PET granule lots, bought-in preforms and colour masterbatch, then draw them down against runs, with a low-colour warning raised before the hopper is loaded. Shortfalls show before start-up.

Operational bottlenecks to check

Weight and wall thickness drift unseen

Weight is checked on paper at the machine, once an hour at best. The sheet goes into a folder nobody opens until a customer complains about a thin shoulder. No record shows how bottle weight moved over the shift.

Flash regrind is blended blindly

Pinch-off trim goes into the grinder and then into the next hopper, and no run carries its blend ratio. A later complaint has nothing to hold on to.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Specification

    The filler sends volume, neck finish, target weight, handle style and drop-test requirements, which are saved as a container design linked to the customer and to the drawing revision. Nothing is retyped later.

  2. 2. Quotation and mould

    A quote is built from container weight, cavities per mould, cycles per hour, and resin and masterbatch cost, while a new mould gets design sign-off and a trial record. Revisions stay on file.

  3. 3. Planning

    The planner matches the mould to an extrusion blow or stretch blow machine, then checks that resin, preforms, masterbatch and carton stock cover the run before the setter arrives. Shortages show up early.

  4. 4. Production

    The setter loads the stored parison or reheat settings, operators log counts, weights and wall readings by cavity, and pinch-off trim goes to the granulator with its weight noted. Every shot is accounted for.

  5. 5. Testing

    Leak, drop and top-load tests are taken by cavity at set intervals, and a failed sample holds the run until a supervisor releases or scraps it. The hold is automatic.

  6. 6. Packing and delivery

    Containers are cartoned or bagged onto pallets in the layer pattern the filler asked for, and the delivery note and label name the run and the resin lot. Stacking follows the account.

Industry reports to connect with

  • Bottle weight trend by cavity and shift
  • Rejects by defect such as thin shoulder, pinhole or flash, by mould and resin lot
  • Regrind used against virgin resin by container
  • Leak and drop test results by customer and cavity

Questions before implementation.

When should blow moulding companies consider asset amc tracking?

Use when important equipment has warranties or maintenance agreements to monitor. An asset enters service or its maintenance cover changes.

What should we bring to the requirements discussion?

Bring anonymised examples of Asset identifiers; Warranty and service contracts; Service dates and vendor contacts. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track the maintenance cover and service dates of assets your business owns or uses. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The register tracks purchased maintenance cover. Service delivery remains the provider’s responsibility, and equipment readiness requires the appropriate inspection.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Contract dates match the attached agreement. Use this check when reviewing the first working version.

Related functions for blow moulding companies.

    Talk to us

    Discuss asset amc tracking for your business.

    Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

    What happens after you share your requirements

    1. We review your brief and the systems you already use.
    2. We clarify the workflow, missing information and the work to consider first.
    3. The proposed scope sets out the deliverables, responsibilities and dependencies.
    4. Review the scope and commercial terms before deciding whether to proceed.

    Start with your requirements

    Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

    Share your requirements