Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Blow moulding companies

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Resin, preforms and masterbatch carry reorder levels by grade and colour. Cartons, shrink film and packing caps do too, and finished pallets are counted by design. Low resin raises an alert.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Blow moulding companies

How the business operates.

Hollow containers hide faults. Thin walls are the usual culprit. A bottle with a thin shoulder looks fine on the line and then splits in a filler’s warehouse, weeks after the shift that made it ended. The record that explains it, such as parison programme, resin lot or cooling time, is rarely near the pallet.

Container design register

Hold each bottle or drum with its volume, neck finish, target weight, mould and the allowed wall thickness range, so a setter knows the limits before the first shot.

Machine set-up sheets

Store parison programme, blow pressure, cooling time and cycle for each mould and machine pairing, and show which setting was used on every run.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Container quotations. Price a bottle, jerry can or drum from shot weight, cavities, cycle rate, and resin and masterbatch cost, then keep every revision beside the accepted price. Lost quotes stay searchable.
  • Container design register. Store volume, neck finish, target weight, allowed wall range, handle style, mould number and test requirements for each design, together with the customer’s drawing revision. Old revisions remain readable.
  • Machine set-up sheets. Keep parison programme, blow pressure, cooling time and cycle target for every mould and machine pairing, so a setter sees which settings a run really used. Good days become repeatable.
  • Resin, preform and masterbatch stock. Receive HDPE and PET granule lots, bought-in preforms and colour masterbatch, then draw them down against runs, with a low-colour warning raised before the hopper is loaded. Shortfalls show before start-up.

Operational bottlenecks to check

Weight and wall thickness drift unseen

Weight is checked on paper at the machine, once an hour at best. The sheet goes into a folder nobody opens until a customer complains about a thin shoulder. No record shows how bottle weight moved over the shift.

Flash regrind is blended blindly

Pinch-off trim goes into the grinder and then into the next hopper, and no run carries its blend ratio. A later complaint has nothing to hold on to.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Specification

    The filler sends volume, neck finish, target weight, handle style and drop-test requirements, which are saved as a container design linked to the customer and to the drawing revision. Nothing is retyped later.

  2. 2. Quotation and mould

    A quote is built from container weight, cavities per mould, cycles per hour, and resin and masterbatch cost, while a new mould gets design sign-off and a trial record. Revisions stay on file.

  3. 3. Planning

    The planner matches the mould to an extrusion blow or stretch blow machine, then checks that resin, preforms, masterbatch and carton stock cover the run before the setter arrives. Shortages show up early.

  4. 4. Production

    The setter loads the stored parison or reheat settings, operators log counts, weights and wall readings by cavity, and pinch-off trim goes to the granulator with its weight noted. Every shot is accounted for.

  5. 5. Testing

    Leak, drop and top-load tests are taken by cavity at set intervals, and a failed sample holds the run until a supervisor releases or scraps it. The hold is automatic.

  6. 6. Packing and delivery

    Containers are cartoned or bagged onto pallets in the layer pattern the filler asked for, and the delivery note and label name the run and the resin lot. Stacking follows the account.

Industry reports to connect with

  • Bottle weight trend by cavity and shift
  • Rejects by defect such as thin shoulder, pinhole or flash, by mould and resin lot
  • Regrind used against virgin resin by container
  • Leak and drop test results by customer and cavity

Questions before implementation.

When should blow moulding companies consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements