Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Building and construction material manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Cement bags, aggregate heaps and pallets of fired tiles each carry a reorder level. A low silo or a thin pallet row raises an alert. Stores acts before the press stands idle.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Building and construction material manufacturers

How the business operates.

A plant selling building material sells weight, volume and strength to buyers who never see the factory. What reaches the site must match the concrete grade or the brick class that was ordered. The paper behind it must say so.

Orders, price lists and dealer accounts

Take orders from dealers and project sites against their own price list, scheme and credit limit, and show the account balance at the moment of booking.

Mix designs and bills of materials

Hold the mix design for each product and grade, and compare what a batch should have drawn of cement, aggregate or clay against what stores issued.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Orders and dealer price lists. Book orders from dealers, contractors and project sites against their own rate cards and rebate schemes. Delivery dates, quantities and the site contact for unloading sit on one list.
  • Credit limits and dealer accounts. Set a credit limit and a payment term for each dealer. The order desk is warned whenever a new order, an unbanked cheque or an overdue bill would push the account past either figure.
  • Mix designs and bills of materials. Hold the recipe for each product and grade, with cement, sand, coarse aggregate, fly ash, admixture and water quantities per batch or per unit. Planned use is then compared with what stores actually issued to the mixer.
  • Production planning and batches. Plan by vibro-press line, mould or kiln car. Every pour is logged with its date, shift, count made, pieces broken in handling and the cement and aggregate drawn.

Operational bottlenecks to check

Batches are not linked to tests

A 28-day cube result or an absorption figure sits on a lab sheet, while the dispatch sits on a weighbridge slip in another drawer. When a contractor complains about crumbling hollow blocks, nobody can name the batch the truck was loaded from.

Mix and consumption drift apart

The mix design calls for one weight of cement, fly ash or clay and the store issues another. The variance surfaces at stock-taking, long after the batch was cast.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Order

    A dealer, a contractor or a project site places an order. It is booked against the account’s rate card, its rebate scheme and its credit limit, so the price and the exposure are both visible at booking.

  2. 2. Production plan

    Confirmed orders and standing stock lines become a plan by vibro-press line, mould or kiln. Cement, coarse aggregate, quarry dust, clay and admixtures are checked against the mix design before the run starts. Shortfalls surface early.

  3. 3. Batch and material

    Stores issues cement and aggregate against the batch number. Then the supervisor records the casting date, the shift, the quantity made and the wastage from broken units.

  4. 4. Curing and testing

    Units move through steam curing, water curing, drying or firing. Samples go to the lab, and the 7-day and 28-day cube result or the absorption figure is entered against the batch before the pallets are released to the yard.

  5. 5. Dispatch

    Vehicles are weighed in and out on the weighbridge. Loads are drawn from released batches only, and the delivery note prints at the gatehouse with the batch numbers on it.

  6. 6. Invoice and collection

    The dispatch record raises the tax invoice for the load. Receipts, breakage claims and credit notes are posted against it, and the dues of each dealer are followed from the oldest bill.

Industry reports to connect with

  • Orders open and delivered by dealer
  • Production by batch, line and shift
  • Raw material used against the mix design
  • Test results by product and batch

Questions before implementation.

When should building and construction material manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Related functions for building and construction material manufacturers.

    Talk to us

    Discuss stock tracking and alerts for your business.

    Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

    What happens after you share your requirements

    1. We review your brief and the systems you already use.
    2. We clarify the workflow, missing information and the work to consider first.
    3. The proposed scope sets out the deliverables, responsibilities and dependencies.
    4. Review the scope and commercial terms before deciding whether to proceed.

    Start with your requirements

    Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

    Share your requirements