Skip to main content
GullySystem
Manufacturing

Order Management for CNC machining companies

Track a confirmed order through fulfilment and billing.

CRM

Does this function belong in your operation?

Use when sales, operations and billing share confirmed orders.

A customer confirms goods or work.

Buyer call-offs can request the same part repeatedly while changing quantity, delivery location or drawing revision. Configure the order so each release has its own commitment and dispatch balance. Sales should be able to answer which revision is being supplied without interpreting the latest attachment as permission to change lots already on a machine. A standing order and an individual delivery release should be distinguishable. The standing commercial reference can support repeat business, but it does not tell dispatch which quantity the buyer currently wants at which address. Each confirmed release needs its own evidence and a balance that survives later schedule changes.

Bring the records the workflow depends on.

  • Buyer order and individual call-off references
  • Part number, drawing revision and accepted quantity
  • Delivery dates and ship-to locations by release
  • Agreed unit rate and inspection-document requirements

Outputs to check

  • Open call-off and dispatch-balance view
  • Buyer-change decision history
  • Order-linked production and shipment references

Follow the order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Capture confirmation

    Record accepted quantities, price and terms.

  2. 2. Check release conditions

    Review credit, approval and any stock or capacity requirements.

  3. 3. Authorise fulfilment

    Pass the confirmed lines to dispatch, production or service delivery.

  4. 4. Record partial progress

    Compare accepted fulfilment evidence with the remaining order balance.

  5. 5. Reconcile and close

    Match billing and approved cancellations before closing the commitment.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Sales coordinator

Records the accepted release and checks differences between the buyer's instruction and the quotation.

Production planner

Links the release to machining lots and reports shortages or revision conflicts before changing commitments.

Dispatch clerk

Matches approved finished lots and required inspection papers to the release being shipped.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Buyer changes revision mid-run

Obtain a decision for existing work in progress and keep old and new quantities distinct.

Part shipment requested

Reduce only the shipped release quantity and retain the remaining commitment.

Call-off cancelled after material issue

Record the commercial decision and route the cut material or finished pieces for separate disposition.

Can this work independently?

Orders can be entered from an accepted customer instruction without CRM. Stock, production, service delivery and invoicing connect through order-line references. Each owns its execution record; an order status should reflect their confirmed outcomes rather than assume delivery from a planned date.

Systems and records it connects with

  • Quote and proposal management: Commercial proposal versions and acceptance details.
  • Stock tracking and alerts: Item-location quantities and authorised stock movements.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.
  • Accounting software: Posted financial entries and reconciliation references.

Configure, test and introduce the workflow.

  • Walk us through an order from call to payment. A note shows the steps and the documents.
  • Decide which changes need approval. A test order can then be taken, with your own staff at the keys. Share orders still pending. The trial import shows quantities dispatched and pending for the storekeeper to check.
  • Sales and the store team practise a part delivery. A note for the counter follows. New orders go through the system from the date you agree. Changes from the opening week are reviewed together. Habits settle quickly.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • A partial shipment leaves the correct balance on the specific buyer release.
  • The dispatch record identifies the drawing revision actually supplied.
  • Cancelling a call-off preserves its linked work-order and material history.
CNC machining companies

How the business operates.

You run Swiss-type and chucker turning centres, a few VMCs with tombstone fixtures and a centreless grinder, making shafts, trunnions, pinions and hydraulic adaptors to someone else’s drawing. Concentricity, roundness and surface roughness limits are tight. Quantities swing from order to order, and the buyer’s quality engineer reads your first-article approval file and inspection report long before the invoice is looked at.

Drawing revisions held on the order

Hold the revision letter on the part, the sales order and the work order, so a lot cut to an older revision stays identifiable long after it ships. Setters see only the current one.

Operations and machines per part

List the operations for each part in sequence, such as facing, rough turning, counterboring, keyway milling, spline cutting, knurling, broaching, honing and grinding, with the machine for each.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and production quotations. Log buyer enquiries with the drawing or sample attached, then cost bar weight, machine minutes and outside plating before a price goes back to the purchasing desk. Every costing revision is kept.
  • Sales orders and delivery commitments. Hold confirmed orders with part number, drawing revision, quantity, rate, schedule and the delivery week promised to the buyer, so a balance after each part delivery is always visible. Late orders stand out.
  • Multi-level bill of materials and routing. Keep each part’s material list and stage sequence. Drawing revisions, scrap allowance, the CNC lathe or press brake each stage runs on and the fixture it needs sit beside it. A sub-assembly carries its own list.
  • Work orders and batch planning. Release a work order for a batch, set its target date, and see the load already queued on each machine and stage. Planners move dates by hand. Overloaded stages stand out.

Operational bottlenecks to check

The wrong drawing revision reaches the machine

A buyer revises a tolerance by mail, yet the setter still holds last month’s printout beside the control panel and runs the whole lot of pinions to it. The gauge disagrees at the gate.

Setup and first-piece time go uncounted

Quotes assume a cycle time, but changeovers, first-piece approval, a worn collet, a blunt reamer, swarf clearing and the wait for a thread ring gauge use up whole shifts. Those hours go uncounted.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and costing

    A buyer sends a drawing. The unit works out bar weight, machine minutes and plating charges, and a quotation goes back against that enquiry with the drawing revision noted.

  2. 2. Sales order

    The buyer confirms by purchase order, mail or WhatsApp. Quantity, rate, part number, drawing revision and the promised delivery week go on the order, so planning starts from facts and nothing is retyped.

  3. 3. Work order and material planning

    A work order opens for a batch. The bill of materials lists the bar, sheet or granule that the store must issue by grade and size, with scrap allowance added for the cut length. Shortages go to purchase as a requirement.

  4. 4. Production stages

    The batch moves on its job cards through sawing, turning, welding, assembly or filling, and each stage records quantity passed, rejected and sent for rework. The operator, machine and shift are named on every card, so piece counts reconcile when the batch closes and nobody argues about a shortfall.

  5. 5. Quality and packing

    Final inspection records go/no-go gauge results. Accepted pieces are packed in cartons, labelled and taken into finished goods, while any held lot waits for a decision from the quality head and the planner.

  6. 6. Dispatch, billing and follow-up

    The delivery note and the tax invoice both come from the work order, and payment follow-up is tracked after dispatch along with the next order from the same buyer.

Industry reports to connect with

  • Work orders still open, grouped by stage and promised week
  • Production by stage, machine and operator each shift
  • Material consumed against the bill of materials
  • Rejection and scrap by stage and reason

Questions before implementation.

When should cnc machining companies consider order management?

Use when sales, operations and billing share confirmed orders. A customer confirms goods or work.

What should we bring to the requirements discussion?

Bring anonymised examples of Buyer order and individual call-off references; Part number, drawing revision and accepted quantity; Delivery dates and ship-to locations by release; Agreed unit rate and inspection-document requirements. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track a confirmed order through fulfilment and billing. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Stock, production and carrier connections need agreed scope.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. A partial shipment leaves the correct balance on the specific buyer release. Use this check when reviewing the first working version.

Talk to us

Discuss order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements